Emmanuel Dekemper

A global climatology of the mesospheric sodium layer from GOMOS data during the 2002–2008 period

This paper presents a climatology of the mesospheric sodium layer built from the processing of 7 years of GOMOS data. With respect to preliminary results already published for the year 2003, a more careful analysis was applied to the averaging of occultations inside the climatological bins (10 in latitude-1 month). Also, the slant path absorption lines of the Na doublet around 589 nm shows evidence of partial saturation that was responsible for an underestimation of the Na concentration in our previous results. The sodium climatology has been validated with respect to the Fort Collins lidar measurements and, to a lesser extent, to the OSIRIS 2003–2004 data. Despite the important natural sodium variability, we have shown that the Na vertical column has a marked semi-annual oscillation at low latitudes that merges into an annual oscillation in the polar regions,a spatial distribution pattern that was unreported so far. The sodium layer seems to be clearly influenced by the mesospheric global circulation and the altitude of the layer shows clear signs of subsidence during polar winter. The climatology has been parameterized by time-latitude robust fits to alCorrespondence to: D. Fussen (didier.fussen@oma.be) low for easy use. Taking into account the non-linearity of the transmittance due to partial saturation, an experimental approach is proposed to derive mesospheric temperatures from limb remote sounding measurements.

Tunable acousto-optic spectral imager for atmospheric composition measurements in the visible spectral domain

We describe a new spectral imaging instrument using a TeO(2) acousto-optical tunable filter (AOTF) operating in the visible domain (450-900 nm). It allows for fast (~1 second), monochromatic (FWHM ranges from 0.6 nm at 450 nm to 3.5 nm at 800 nm) picture acquisition with good spatial resolution. This instrument was designed as a breadboard of the visible channel of a new satellite-borne atmospheric limb spectral imager, named the Atmospheric Limb Tracker for the Investigation of the Upcoming Stratosphere (ALTIUS), that is currently being developed. We tested its remote sensing capabilities by observing the dense, turbulent plume exhausted by a waste incinerator stack at two wavelengths sensitive to NO(2). An average value of 6.0±0.4×10(17) molecules cm(-2) has been obtained for the NO(2) slant column density within the plume, close to the stack outlet. Although this result was obtained with a rather low accuracy, it demonstrates the potential of spectral imaging by using AOTFs in remote sensing.

ALTIUS: a spaceborne AOTF-based UV-VIS-NIR hyperspectral imager for atmospheric remote sensing

Since the recent losses of several atmospheric instruments with good vertical sampling capabilities (SAGE II, SAGE III, GOMOS, SCIAMACHY,. . . ), the scientific community is left with very few sounders delivering concentration pro les of key atmospheric species for understanding atmospheric processes and monitoring the radiative balance of the Earth. The situation is so critical that at the horizon 2020, less than five such instruments will be on duty (most probably only 2 or 3), whereas their number topped at more than 15 in the years 2000. In parallel, recent inter-comparison exercises among the climate chemistry models (CCM) and instrument datasets have shown large differences in vertical distribution of constituents (SPARC CCMVal and Data Initiative), stressing the need for more vertically-resolved and accurate data at all latitudes. In this frame, the Belgian Institute for Space Aeronomy (IASB-BIRA) proposed a gap-filler small mission called ALTIUS (Atmospheric Limb Tracker for the Investigation of the Upcoming Stratosphere), which is currently in preliminary design phase (phase B according to ESA standards). Taking advantage of the good performances of the PROBA platform (PRoject for On-Board Autonomy) in terms of pointing precision and accuracy, on-board processing ressources, and agility, the ALTIUS concept relies on a hyperspectral imager observing limb-scattered radiance and solar/stellar occultations every orbit. The objective is twofold: the imaging feature allows to better assess the tangent height of the sounded air masses (through easier star tracker information validation by scene details recognition), while its spectral capabilities will be good enough to exploit the characteristic signatures of many molecular absorption cross-sections (O3, NO2, CH4, H2O, aerosols,...). The payload will be divided in three independent optical channels, associated to separated spectral ranges (UV: 250- 450 nm, VIS: 440-800 nm, NIR: 900-1800 nm). This approach also offers better risk mitigation in case of failure in one channel. In each channel, the spectral filter will be an acousto-optical tunable filter (AOTF). Such devices offer reasonable étendue with good spectral resolution and excellent robustness and compactness. TeO2-based AOTFs have already been used in space missions towards Mars and Venus (MEX and VEX, ESA). While such TeO2 crystals are common in VIS-NIR applications, they are not transparent below 350 nm. Recent progress towards UV AOTFs have been made with the advent of KDP-based filters. Through collaboration with the Moscow State University (MSU), several experiments were conducted on a KDP AOTF and gave confidence on this material. Here, we present the general concept of ALTIUS and its optical design with particular attention on the AOTF. Several results obtained with optical breadboards for the UV and VIS ranges will be exposed, such as the O3 and NO2 absorption cross-section measurements, or spectral images. These results illustrate the spectral and optical performances to be expected from an AOTF-based hyperspectral imager. Their implications for ALTIUS will be discussed

Influence of driving power on the performance of UV KDP-based acousto-optical tunable filters

Spectral imaging is a powerful tool for remote sensing applications. Among other valuable options, acousto-optical tunable filters (AOTF) offer interesting properties to this class of instruments. When sensitivity to ultra-violet (UV) light is required, KH2PO4 crystal (KDP) is a good choice for the acousto-optic (AO) interaction medium as its AO figure of merit is relatively large compared to other materials transparent in UV. However, it generally requires more acoustic power than well-known TeO2-based devices to achieve the highest diffraction efficiency. We report on measurements performed with a KDP-based AOTF (9-cut) driven with RF signals up to 3 W. It has been found that owing to various effects (Joules, acoustic wave attenuation,...) the heating of the crystal by a few degrees yields severe alteration of the AOTF spectral transmission function (STF): shift of the central wavelength, increase of the bandwidth and decrease of the peak filter efficiency have been observed. These three effects degrade the AOTF overall performance if not taken into account. This paper presents the experimental evidences and shows how a temperature-dependent AOTF model allows to derive the inner temperature of the device. Possible reasons for the flattening of the STF are also discussed.

Visible spectral imager for occultation and nightglow (VISION) for the PICASSO Mission

PICASSO - A PICo-satellite for Atmospheric and Space Science Observations is an ESA project led by the Belgian Institute for Space Aeronomy, in collaboration with VTT, Clyde Space Ltd. (UK), and the Centre Spatial de Liège (BE). VTT Technical Research Centre of Finland Ltd. will deliver the Visible Spectral Imager for Occultation and Nightglow (VISION) for the PICASSO mission. The VISION targets primarily the observation of the Earths atmospheric limb during orbital Sun occultation. By assessing the radiation absorption in the Chappuis band for different tangent altitudes, the vertical profile of the ozone is retrieved. A secondary objective is to measure the deformation of the solar disk so that stratospheric and mesospheric temperature profiles are retrieved by inversion of the refractive raytracing problem. Finally, occasional full spectral observations of polar auroras are also foreseen. The VISION design realized with commercial of the shelf (CoTS) parts is described. The VISION instrument is small, lightweight (~500 g), Piezo-actuated Fabry-Perot Interferometer (PFPI) tunable spectral imager operating in the visible and near-infrared (430 – 800 nm). The spectral resolution over the whole wavelength range will be better than 10 nm @ FWHM. VISION has is 2.5° x 2.5° total field of view and it delivers maximum 2048 x 2048 pixel spectral images. The sun image size is around 0.5° i.e. ~500 pixels. To enable fast spectral data image acquisition VISION can be operated with programmable image sizes. VTT has previously developed PFPI tunable filter based AaSI Spectral Imager for the Aalto-1 Finnish CubeSat. In VISION the requirements of the spectral resolution and stability are tighter than in AaSI. Therefore the optimization of the of the PFPI gap control loop for the operating temperature range and vacuum conditions has to be improved. VISION optical, mechanical and electrical design is described.

Testing of a possible RF-generator for a space based AOTF application in the frame of an ESA space mission

In the frame of a mission of the European Space Agency (ESA) a space qualified RF-generator needs to be developed to drive an AOTF (Acousto-Optical Tunable Filter) to make hyper-spectral images of the limb of the Earth. Custom off-the-shelf electronics can not fulfil the requirements for this scientific mission, hence alternative solutions for the RF-generation are investigated. This paper describes one of the possible solutions.

Influence of temperature gradients on spectral transmission of acousto-optic tunable filters based on KH 2 PO 4 crystal

we examined acousto-optic interaction in the KH2PO4 crystal used in devices providing control of optical radiation parameters. The crystal was applied in a wide-angle tunable acousto-optic filter capable of image processing in the ultraviolet region of spectrum. The filter operated at different temperature conditions because of changes of environmental temperature and also due to heating of the crystal by driving electric and acoustic power. As found experimentally and proved theoretically, changes in the temperature of the instrument and appearance of thermal gradients in the crystal volume sufficiently influenced on operation characteristics of the acousto-optic device.