Emmanuel Tylianakis

Pillared Graphene: A New 3-D Network Nanostructure for Enhanced Hydrogen Storage

A multiscale theoretical approach was used to investigate hydrogen storage in a novel three-dimensional carbon nanostructure. This novel nanoporous material has by design tunable pore sizes and surface areas. Its interaction with hydrogen was studied thoroughly via ab initio and grand canonical Monte Carlo calculations. Our results show that, if this material is doped with lithium cations, it can store up to 41 g H2/L under ambient conditions, almost reaching the DOE volumetric requirement for mobile applications.

Designing 3D COFs with Enhanced Hydrogen Storage Capacity

Hydrogen storage properties have been studied on newly designed three-dimensional covalent-organic framework (3D-COF). The design of these materials was based on the ctn network of the ultralow density COF-102. The structures were optimized by multiscale techniques and the optimized structures were checked for their storage capacities by grand canonical Monte Carlo simulations. Our simulations demonstrate that the gravimetric uptake of one of these new COFs can overpass the value of 25 wt % in 77 K and reach the Department of Energys target of 6 wt % in room temperature, classifying them between the top hydrogen storage materials.

Reticular Synthesis of HKUST-like tbo-MOFs with Enhanced CH4 Storage

Successful implementation of reticular chemistry using a judiciously designed rigid octatopic carboxylate organic linker allowed the construction of expanded HKUST-1-like tbo-MOF series with intrinsic strong CH4 adsorption sites. The Cu-analogue displayed a concomitant enhancement of the gravimetric and volumetric surface area with the highest reported CH4 uptake among the tbo family, comparable to the best performing metal organic frameworks (MOFs) for CH4 storage. The corresponding gravimetric (BET) and volumetric surface areas of 3971 m(2) g(-1) and 2363 m(2) cm(-3) represent an increase of 115% and 47%, respectively, in comparison to the corresponding values for the prototypical HKUST-1 (tbo-MOF-1), and are 42% and 20% higher than that of tbo-MOF-2. High-pressure methane adsorption isotherms revealed a high total gravimetric and volumetric CH4 uptakes, reaching 372 cm(3) (STP) g(-1) and 221 cm(3) (STP) cm(-3), respectively, at 85 bar and 298 K. The corresponding working capacities between 5 and 80 bar were found to be 294 cm(3) (STP) g(-1) and 175 cm(3) (STP) cm(-3) and are placed among the best performing MOFs for CH4 storage particularly at relatively low temperature. To gain insight on the mechanism accounting for the resultant enhanced CH4 storage capacity, molecular simulation study was performed and revealed the presence of very strong CH4 adsorption sites near the organic linker with similar adsorption energetics as the open metal sites. The present findings support the potential of tbo-MOFs based on the supermolecular building layer (SBL) approach as an ideal platform to further enhance the CH4 storage capacity via expansion and functionalization of the quadrangular pillars.

Enhancement of hydrogen adsorption in metal-organic frameworks by the incorporation of the sulfonate group and Li cations. A multiscale computational study.

By means of ab initio methods, the effect on the H(2) storage ability of a newly proposed organic linker for IRMOF-14 has been studied. The linker comprises a negatively charged sulfonate (-SO(3)(-1)) group in combination with a Li cation. It is found that these two charged groups significantly increase the interaction energy between the hydrogen molecules and the new proposed organic linker of the MOF. The substituted group of the linker may host up to six hydrogen molecules with an average interaction energy of 1.5 kcal/mol per H(2) molecule. This value is three times larger than the binding energy over the bare linker that has been obtained from DFT calculations. GCMC atomistic simulations verified that the proposed material can be qualified among the highest adsorbing materials for volumetric capture of H(2), especially at ambient conditions. This functionalization strategy can be applied in many different MOF structures to enhance their storage abilities.

The effect of structural and energetic parameters of MOFs and COFs towards the improvement of their hydrogen storage properties

Open-framework materials have been proposed as potential materials for hydrogen storage. Metal-organic framework (MOF) and covalent-organic framework (COF) materials are under extensive study to discover their storage abilities. In particular the IRMOF family of materials have been considered as ideal to study the effect of different factors that affect the hydrogen storage capacity. In this paper, we analyse the effect of different factors such as surface area, pore volume and the interaction of hydrogen with the molecular framework on the hydrogen uptake of such materials. Through this analysis we propose guidelines to enhance hydrogen storage capacity of already synthesized materials and recommend advanced materials for this application.

Haeckelites : A promising anode material for lithium batteries application. An ab initio and molecular dynamics theoretical study

Using both ab initio and molecular dynamics calculations, the authors have investigated the lithium interaction with carbon nanotubes and the recently reported haeckelite nanotubes. Their results show that lithium metals interact preferably with the pentagonal and heptagonal rings of the haeckelite rather than the hexagonal of the carbon nanotube. The structural and electronic differences between the carbon and haeckelite nanotubes result in different binding energies of lithium metals. Thus, haeckelites are more promising materials for lithium storage applications than carbon nanotubes. They report that this carbon material can store Li metals with a density of LiC1.6.

Multiscale simulations reveal IRMOF-74-III as a potent drug carrier for gemcitabine delivery

A multiscale computational study is reported that investigates the microscopic behavior of the anti-cancer drug gemcitabine (GEM) stored in metal organic frameworks IRMOF-74-III and the functionalized OH-IRMOF-74-III. Accurate Quantum Mechanics calculations indicate that the GEM-MOF interaction energy in both host structures is suitable for drug adsorption and delivery with a slow release. Based on Grand-Canonical Monte Carlo simulations, the predicted maximum loading of GEM is three-fold greater than in lipid-coated mesoporous silica nanoparticles and similar to liposome nanocarriers. Finally, Molecular Dynamics simulations reveal slow diffusion of GEM inside the pores of both hosts, which is crucial for the controlled release of GEM. This work unravels the energetics and dynamics of GEM in MOFs and highlights the ability of the biocompatible (OH)-IRMOF-74-III to be used as a promising nano encapsulator for GEM delivery.