Erik Elkaïm

High-Throughput Aided Synthesis of the Porous Metal−Organic Framework-Type Aluminum Pyromellitate, MIL-121, with Extra Carboxylic Acid Functionalization

A new porous metal-organic framework (MOF)-type aluminum pyromellitate (MIL-121 or Al(OH)[H(2)btec]·(guest), (guest = H(2)O, H(4)btec = pyromellitic acid) has been isolated by using a high-throughput synthesis method under hydrothermal conditions. Its structure was determined from powder X-ray diffraction analysis using synchrotron radiation (Soleil, France) and exhibits a network closely related to that of the MIL-53 series. It is a three-dimensional (3D) framework containing one-dimensional (1D) channels delimited by infinite trans-connected aluminum-centered octahedra AlO(4)(OH)(2) linked through the pyromellitate ligand. Here the organic ligand acts as tetradendate linker via two of the carboxylate groups. The two others remain non-bonded in their protonated form, and this constitutes a rare case of the occurrence of both bonding and non-bonding organic functionalities of the MOF family. The non-coordinated -COOH groups points toward the channels to get them an open form configuration. Within the tunnels are located unreacted pyromellitic acid and water species, which are evacuated upon heating, and a porous MIL-121 phase is obtained with a Brunauer-Emmett-Teller (BET) surface area of 162 m(2) g(-1). MIL-121 has been characterized by IR, thermogravimetry (TG) analyses, and solid state NMR spectroscopy employing a couple of two-dimensional (2D) techniques such as (1)H-(1)H SQ-DQ BABA, (1)H-(1)H SQ-SQ RFDR, (27)Al{(1)H} CPHETCOR and (27)Al MQMAS.

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs

A novel Zr-chain based MOF, namely MIL-163, was designed and successfully synthesized using a bis-1,2,3-trioxobenzene ligand. Endowed with large square-shaped channels of 12 Å width, it shows remarkable water uptake (ca. 0.6 cm(3) g(-1) at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.

A Zn azelate MOF: combining antibacterial effect

A novel biocompatible and bioactive Metal–Organic Framework (BioMOF), named BioMIL-5 (Bioactive Materials from Institut Lavoisier), was hydrothermally synthesized from a Zn2+ salt and azelaic acid, both with interesting antibacterial and dermatological properties. Its structure was determined by high resolution X-ray powder diffraction, and further characterized by infrared spectroscopy, thermogravimetric analysis and elemental analysis. The determination of the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) values of BioMIL-5 in Staphylococcus aureus and Staphylococcus epidermidis demonstrated that the antimicrobial activity of the individual components of BioMIL-5 were maintained after its synthesis. Moreover, BioMIL-5 was found to be stable in water and in bacterial culture medium, especially in water, leading to the subsequent progressive release of its active constituents, AzA and Zn2+ ions. Interestingly, this slow active delivery allowed control of the growth of a S. epidermidis suspension over 7 days. The high stability of this material and the maintenance of its antibacterial properties make BioMIL-5 a good candidate for future bioapplications, for skin care and in cosmetics.

Investigating the Case of Titanium(IV) Carboxyphenolate Photoactive Coordination Polymers

The reactivity of 2,5-dihydroxyterephthalic acid (H4DOBDC) with titanium(IV) precursors was thoroughly investigated for the synthesis of metal-organic frameworks under solvothermal conditions. Four crystalline phases were isolated whose structures were studied by a combination of single-crystal or powder X-ray diffraction and solid-state NMR. The strong coordination ability of the phenolate moieties was found to favor the formation of isolated TiO6 octahedra bearing solely organic ligands in the resulting structures, unless hydrothermal conditions and precondensed inorganic precursors are used. It is worth noting that these solids strongly absorb visible light, as a consequence of the ligand-to-metal charge transfer (LMCT) arising from Ti-phenolate bonds. Preliminary photocatalytic tests suggest that one compound, namely, MIL-167, presents a higher activity for hydrogen evolution than the titanium carboxylate MIL-125-NH2 but that such an effect cannot be directly correlated with its improved light absorption feature.

Synthesis, ab initio X-ray powder diffraction crystal structure, and magnetic properties of Mn3(OH)2(C6H2O4S)2 metal-organic framework.

A new hydroxythiophenedicarboxylate metal-organic framework based on Mn(II) cations has been obtained by an aqueous two-step procedure including hydrothermal treatment. The structure of Mn(3)(OH)(2)(C(6)H(2)O(4)S)(2) has been determined ab initio from synchrotron X-ray powder diffraction data and consists of infinite inorganic ribbons which are interlinked by 2,5-thiophenedicarboxylate (tdc) molecules (monoclinic, space group P2(1)/c, a = 3.4473(1) Å, b = 19.1287(1) Å, c = 11.0069(1) Å, β = 97.48(1)°, V = 719.65(1) Å(3), and Z = 2). Each ribbon is built of three vertex-sharing chains of edge-sharing MnO(6) octahedrons. These ribbons are bridged together by the carboxylate functions of the tdc molecule to form a pseudo-2D inorganic subnetwork, while this molecule develops in the third dimension to pillar these pseudo-2D layers. An unprecedented hexadentate symmetric bridging mode is adopted by tdc which bridges two chains of a ribbon on one side and two ribbons of a pseudo-2D inorganic subnetwork on the other side. Magnetic measurements suggest that the titled compound is antiferromagnetic below T(N) = 17.7 K. Heat capacity measurements confirm the existence of a magnetic phase transition toward a 3D long-range ordered state. These C(P)(T) data have also been used for the calculation of the thermal variations of both the adiabatic temperature change ΔT(ad) and magnetic entropy change ΔS(m) of the material, namely its magnetocaloric effect.

DFT-assisted structure determination of α1- and α2-VOPO4: new insights into the understanding of the catalytic performances of vanadium phosphates

Structural investigations on vanadium phosphates, which are extensively used as catalysts in industry, often resulted in important advances in the understanding of the mechanisms driving the catalytic oxidation of light hydrocarbons. Layer translations in the two lamellar vanadium phosphates α1- and α2-VOPO4 phases identified during the catalysis were investigated by the combination of first-principles calculations, synchrotron X-ray powder diffraction, single-crystal X-ray diffraction and solid-state NMR. This analysis reveals an important feature: the α1-form is the only polymorph of VOPO4 to exhibit layer translations that prevent the formation of infinite VO6 chains. A detailed investigation of this structural characteristic in vanadium phosphates reveals the correlation between the presence of infinite VO6 chains and the catalytic performances of related phases.

Structural Study of a Doubly Ordered Perovskite Family NaLnCoWO6 (Ln = Y, La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb): Hybrid Improper Ferroelectricity in Nine New Members

The compounds of the doubly ordered perovskite family NaLnCoWO6 (Ln = Y, La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, and Yb) were synthesized by solid-state reaction, nine of which (Ln = Y, Sm, Eu, Gd, Tb, Dy, Ho, Er, and Yb) are new phases prepared under high-temperature and high-pressure conditions. Their structural properties were investigated at room temperature by synchrotron X-ray powder diffraction and neutron powder diffraction. All of them crystallize in monoclinic structures, especially the nine new compounds have the polar space group P21 symmetry, as confirmed by second harmonic generation measurements. The P21 polar structures were decomposed and refined in terms of symmetry modes, demonstrating that the polar mode is induced by two nonpolar modes in a manner of Hybrid Improper Ferroelectricity. The amplitudes of these three major modes all increase with decreasing the Ln cation size. The spontaneous ferroelectric polarization is estimated from the neutron diffraction data of three samples (Ln = Y, Tb, and Ho) and can be as large as ∼20 μC/cm2.

A Flexible Fluorescent Zr Carboxylate Metal–Organic Framework for the Detection of Electron-Rich Molecules in Solution

A novel Zr(IV) dicarboxylate metal organic framework (MOF) built up from an s-tetrazine derived ligand was prepared. This solid, which exhibits a diamond type network, combines a good stability in water, a structural flexibility, and fluorescence properties thanks to the organic ligand. It is noteworthy that this fluorescence is quenched when exposed to electron-rich molecules in solution, such as amines or phenol, this phenomenon being associated with the adsorption of the quencher, as unambiguously proven by X-ray diffraction (XRD) analysis. Finally, the quenching efficiency is shown to be governed not only by electronic and steric factors but also by the relative polarity of the solvent, the MOF, and the quencher. This work thus suggests that it is possible to develop new MOF-based sensors presenting in a given medium (such as water) highly selective responses.

Mn2TeO6: A Distorted Inverse Trirutile Structure

Inverse trirutile Mn2TeO6 was investigated using in situ neutron and X-ray powder diffraction between 700 °C and room temperature. When the temperature was decreased, a structural phase transition was observed around 400 °C, from a tetragonal (P42/mnm) to a monoclinic phase (P21/c), involving a doubling of the cell parameter along b. This complex monoclinic structure has been solved by combining electron, neutron, and synchrotron powder diffraction techniques at room temperature. It can be described as a distorted superstructure of the inverse trirutile structure, in which compressed and elongated MnO6 octahedra alternate with more regular TeO6 octahedra, forming a herringbone-like pattern. Rietveld refinements, carried out with symmetry-adapted modes, show that the structural transition, arguably of Jahn-Teller origin, is driven by a single primary mode.

Trirutiles as potential multiferroics: the case of Mn2TeO6

The trirutile structure (A2BO6) is a superstructure of the standard rutile unit cell, involving a (2:1) ordering of A 3+ and B6+, with P42/mnm. Compounds with A magnetic ions, such as Fe, Cr, V, and B non-magnetic ions, such as Te or W, were reported as potential multiferroics candidates [1]. Within this inverse trirutile system, Mn2TeO6 was first reported by Hund [2] and Fruchart et al. [3]. The fact that the structure of Mn2TeO6 was not determined precisely in these earlier works motivated us to revisit its crystal and magnetic structures, along with its physical properties. To this end, synchrotron powder X-ray (MSPD@ALBA, Spain), neutron powder (WISH@ISIS, UK and G4.1@LLB, France), TEM studied were performed.