Erina Hirose

Development of Indirect-Cooling Radiation-Resistant Magnets

In a high-intensity proton beam facility, beam line elements downstream of a production target are exposed to a huge amount of radiation and heat. Beam pipes are closer to the beam than the magnet poles and more difficult to cool sufficiently without tritium production. Therefore, the magnets are placed in a large vacuum chamber, instead of using vacuum pipes located within the pole gaps. We have adopted indirect-cooling mineral-insulation-cable (MIC) coils for these magnets. They have a great advantage that the mechanical strength and the insulation performance can be significantly improved by avoiding the use of ceramic insulation pipes, because electric circuits are completely separated from water passages. We have made coils using 1000-A-class solid-conductor MICs and stainless-steel pipes, and tested magnet operation in vacuum. By improving the structure of end parts of MICs and increasing their emissivity, we have successfully fed the current of DC 1000 A to the solid-conductor MIC coils in vacuum.

The Beam-Handling Magnet System for the J-PARC Neutrino Beam Line

The facility of the long baseline neutrino oscillation experiment using the J-PARCs 50 GeV-0.75 MW proton beam is now under way. The primary proton beam line consists of three sections, i.e. the first preparation (PP) section with normal conducting magnets, the second arc (ARC) section with superconducting magnets and the third final focus (FF) section with normal conducting magnets. In the PP section, we have to clean the primary proton beam extracted from the 50 GeV-PS and transport halo-less pure beam only to the ARC section. In the FF section the magnets have to be placed very close to the pion production target and horns. Therefore the normal conducting magnets have to work in the very high radioactive environment. The R&D works on the radiation resistant magnets for handling a high-intensity proton beam have already been continued at KEK as reported in . Another important point regarding high-intensity beam handling is to realize easy maintenance of the beam line. Any magnet experiencing trouble can be easily removed from beam line and repaired remotely. For this purpose, we developed new tools for the magnet maintenance. These are automatic sling apparatus, quick alignment and installation guide, and the quick disconnect devices of cooling water and electric power. In this paper, we will report the beam line maintenance scheme developed for the neutrino beam line, as well as the design of normal conducting magnet sections

Magnet Operation in Vacuum for High Radiation Environment Near Production Target

In a high-intensity proton beam facility, beam line elements downstream of a production target are exposed to a huge amount of radiation and heat. A water-cooled beam collimator must be located between the target and the magnets, and the iron yokes of the magnets also have to be cooled by water. Moreover, beam pipes are closer to the beam than the magnet poles and more difficult to cool sufficiently without tritium production. Therefore, the magnets are placed in a large vacuum chamber, instead of using vacuum pipes located within the pole gaps. In order to reduce the residual radiation dose during maintenance, the chamber lid and feedthroughs are 4 meter above the beam line, and radiation-shielding blocks are also stacked in the chamber. We have tested magnet operation in vacuum using a dipole magnet with mineral-insulation-cable (MIC) coils and a nickel-coated yoke. A magnet with 2500-A-class hollow-conductor MIC coils has worked successfully with the current of DC 3000 A. The stability of operation in vacuum was confirmed by measuring the temperature with thermocouples and the magnetic field with a NMR probe. We have also succeeded in operating a 1000-A-class solid-conductor MIC coil in vacuum

The K1.8BR spectrometer system at J-PARC

A new spectrometer system was designed and constructed at the secondary beam line K1.8BR in the hadron hall of J-PARC to investigate

Indirectly Cooled Radiation-Resistant Magnets for Hadron Target Station at J-PARC

\bar K N

Radiation-Resistant Magnets for J-PARC

interactions and

Development of radiation resistant magnets for JHF/J-PARC project

\bar K

A new 3-axis magnetic field measurement system based on Hall elements

-nuclear bound systems. The spectrometer consists of a high precision beam line spectrometer, a liquid

Indirectly Cooled Radiation-Resistant Magnet With Slanting Saddle Shape Coils for New Secondary Beam Extraction at J-PARC Hadron Facility

^3

Construction and beam commissioning of Hadron Experimental Hall at J-PARC

He/