Eser Metin Akinoglu

Au@MnO2 core-shell nanomesh electrodes for transparent flexible supercapacitors

A novel Au@MnO2 supercapacitor is presented. The sophisticated core-shell architecture combining an Au nanomesh core with a MnO2 shell on a flexible polymeric substrate is demonstrated as an electrode for high performance transparent flexible supercapacitors (TFSCs). Due to their unique structure, high areal/gravimetric capacitance and rate capability for TFSCs are achieved.

Transparent metal electrodes from ordered nanosphere arrays

We show that perforated metal electrode arrays, fabricated using nanosphere lithography, provide a viable alternative to conductive metal oxides as transparent electrode materials. The inter-aperture spacing is tuned by varying etching times in an oxygen plasma, and the effect of inter-aperture “wire” thickness on the optical and electronic properties of perforated silver films is shown. Optical transmission is limited by reflection and surface plasmons, and for these results do not exceed 73%. Electrical sheet resistance is shown to be as low as 3 Ω ◻−1 for thermally evaporated silver films. The performance of organic photovoltaic devices comprised of a P3HT:PCBM bulk heterojunction deposited onto perforated metal arrays is shown to be limited by optical transmission, and a simple model is presented to overcome these limitations.

Understanding Anisotropic Plasma Etching of Two-Dimensional Polystyrene Opals for Advanced Materials Fabrication

Anisotropic deformation of polystyrene particles in an oxygenated (O2/Ar) plasma is observed for radio frequency (rf) plasma and inductively coupled plasma (ICP). A facile model based on a ratio of completely isotropic and completely anisotropic etching is presented to describe the anisotropy of the etching process and is implemented to determine the height of the spheroid-shaped polystyrene particles. In our systems, we find the plasma etching to be 54% isotropic in the rf plasma and 79% isotropic in the ICP. With this model, the maximum material deposition thickness for nanofabrication with plasma-etched nanosphere lithography or colloid lithography can be predicted. Moreover, the etching of polystyrene particles in an oxygenated plasma is investigated versus the etching time, gas flow, gas composition, temperature, substrate material, and particle size. The results of this study allow precise shape tuning during the fabrication of nanostructured surfaces with size-dependent properties for bionic, medical, and photonic applications.

Physics of transparent conductors

Transparent conductors (TCs) are materials, which are characterized by high transmission of light and simultaneously very high electrical DC conductivity. These materials play a crucial role, and made possible numerous applications in the fields of electro-optics, plasmonics, biosensing, medicine, and “green energy”. Modern applications, for example in the field of touchscreen and flexible displays, require that TCs are also mechanically strong and flexible. TC can be broadly classified into two categories: uniform and non-uniform TC. The uniform TC can be viewed as conventional metals (or electron plasmas) with plasma frequency located in the infrared frequency range (e.g. transparent conducting oxides), or ultra-thin metals with large plasma frequency (e.g. graphen). The physics of the nonuniform TC is much more complex, and could involve transmission enhancement due to refraction (including plasmonic), and exotic effects of electron transport, including percolation and fractal effects. This review ties the TC performance to the underlying physical phenomena. We begin with the theoretical basis for studying the various phenomena encountered in TC. Next, we consider the uniform TC, and discuss first the conventional conducting oxides (such as indium tin oxide), reviewing advantages and limitations of these classic uniform electron plasmas. Next, we discuss the potential of single- and multiple-layer graphene as uniform TC. In the part of the paper dealing with non-uniform metallic films, we begin with the review of random metallic networks. The transparency of these networks could be enhanced beyond the classical shading limit by the plasmonic refractive effects. The electrical conduction strongly depends on the network type, and we review first networks made of individual metallic nanowires, where conductivity depends on the inter-wire contact, and the percolation effects. Next, we review the uniform metallic film networks, which are free of the percolation effects and contact problems. In applications that require high-quality electric contact of a TC to an active substrate (such as LED or solar cells), the network performance can be optimized by employing a quasi-fractal structure of the network. We also consider the periodic metallic networks, where active plasmonic refraction leads to the phenomenon of the extraordinary optical transmission. We review the relevant literature on this topic, and demonstrate networks, which take advantage of this strategy (the bio-inspired leaf venation (LV) network, hybrid networks, etc.). Finally, we review “smart” TCs, with an added functionality, such as light interference, metamaterial effects, built-in semiconductors, and their junctions.

A broadband solar absorber with 12 nm thick ultrathin a-Si layer by using random metallic nanomeshes

We show in theory, simulations, and experiments that, by applying random metallic nanomeshes, a broad-band multilayered structure with a 12 nm thick a-Si film as the active layer can absorb 89% of the total solar energy in the visible range from 400 nm to 700 nm. Such broadness and high absorption can be attributed to the random scattering introduced by the aperiodic metallic nanomeshes and the plasmonic-metamaterial design. The broadband and smooth electromagnetic response, combined with a very high absorption, is desired for solar energy harvesting devices, making this structure a good candidate for high efficiency photovoltaics with ultra-thin active layers.

Enhanced broad-band extraordinary optical transmission through subwavelength perforated metallic films on strongly polarizable substrates

We demonstrate through simulations and experiments that a perforated metallic film, with subwavelength perforation dimensions and spacing, deposited on a substrate with a sufficiently large dielectric constant, can develop a broad-band frequency window where the transmittance of light into the substrate becomes essentially equal to that in the film absence. We show that the location of this broad-band extraordinary optical transmission window can be engineered in a wide frequency range (from IR to UV), by varying the geometry and the material of the perforated film as well as the dielectric constant of the substrate. This effect could be useful in the development of transparent conducting electrodes for various photonic and photovoltaic devices.

Optimization of hierarchical structure and nanoscale-enabled plasmonic refraction for window electrodes in photovoltaics.

An ideal network window electrode for photovoltaic applications should provide an optimal surface coverage, a uniform current density into and/or from a substrate, and a minimum of the overall resistance for a given shading ratio. Here we show that metallic networks with quasi-fractal structure provides a near-perfect practical realization of such an ideal electrode. We find that a leaf venation network, which possesses key characteristics of the optimal structure, indeed outperforms other networks. We further show that elements of hierarchal topology, rather than details of the branching geometry, are of primary importance in optimizing the networks, and demonstrate this experimentally on five model artificial hierarchical networks of varied levels of complexity. In addition to these structural effects, networks containing nanowires are shown to acquire transparency exceeding the geometric constraint due to the plasmonic refraction.

Evidence for critical scaling of plasmonic modes at the percolation threshold in metallic nanostructures

In this work we provide the experimental demonstration of critical scaling of plasmonic resonances in a percolation series of periodic structures which evolve from arrays of holes to arrays of quasi-triangles. Our observations are in agreement with the general percolation theory and could lead to sensor and detector applications.

Long-term release of antibiotics by carbon nanotube-coated titanium alloy surfaces diminish biofilm formation by Staphylococcus epidermidis

Bacterial biofilms cause a considerable amount of prosthetic joint infections every year, resulting in morbidity and expensive revision surgery. To address this problem, surface modifications of implant materials such as carbon nanotube (CNT) coatings have been investigated in the past years. CNTs are biologically compatible and can be utilized as drug delivery systems. In this study, multi-walled carbon nanotube (MWCNT) coated TiAl6V4 titanium alloy discs were fabricated and impregnated with Rifampicin, and tested for their ability to prevent biofilm formation over a period of ten days. Agar plate-based assays were employed to assess the antimicrobial activity of these surfaces against Staphylococcus epidermidis. It was shown that vertically aligned MWCNTs were more stable against attrition on rough surfaces than on polished TiAl6V4 surfaces. Discs with coated surfaces caused a significant inhibition of biofilm formation for up to five days. Therefore, MWCNT-modified surfaces may be effective against pathogenic biofilm formation on endoprostheses.

Observation of a hole-size-dependent energy shift of the surface-plasmon resonance in Ni antidot thin films

A combined experimental and theoretical study of the magneto-optic properties of a series of nickel antidot thin films is presented. The hole diameter varies from 869 down to 636 nm, while the lattice periodicity is fixed at 920 nm. This results in an overall increase of the polar Kerr rotation with decreasing hole diameter due to the increasing surface coverage with nickel. In addition, at photon energies of 2.7 and 3.3 eV, where surface-plasmon excitations are expected, we observe distinct features in the polar Kerr rotation not present in continuous nickel films. The spectral position of the peaks exhibits a red shift with decreasing hole size. This is explained within the context of an effective medium theory by a change in the effective dielectric function of the Ni thin films.