Etienne Dague

Surface structure and nanomechanical properties of Shewanella putrefaciens bacteria at two pH values (4 and 10) determined by atomic force microscopy.

The nanomechanical properties of gram-negative bacteria (Shewanella putrefaciens) were investigated in situ in aqueous solutions at two pH values, specifically, 4 and 10, by atomic force microscopy (AFM). For both pH values, the approach force curves exhibited subsequent nonlinear and linear regimens that were related to the progressive indentation of the AFM tip in the bacterial cell wall, including a priori polymeric fringe (nonlinear part), while the linear part was ascribed to compression of the plasma membrane. These results indicate the dynamic of surface ultrastructure in response to changes in pH, leading to variations in nanomechanical properties, such as the Youngs modulus and the bacterial spring constant.

Imaging living cells surface and quantifying its properties at high resolution using AFM in QI™ mode.

Since the last 10 years, AFM has become a powerful tool to study biological samples. However, the classical modes offered (imaging or tapping mode) often damage sample that are too soft or loosely immobilized. If imaging and mechanical properties are required, it requests long recording time as two different experiments must be conducted independently. In this study we compare the new QI™ mode against contact imaging mode and force volume mode, and we point out its benefit in the new challenges in biology on six different models: Escherichia coli, Candida albicans, Aspergillus fumigatus, Chinese hamster ovary cells and their isolated nuclei, and human colorectal tumor cells.

Organization of the mycobacterial cell wall: a nanoscale view

The biosynthesis of the Mycobacterium tuberculosis cell wall is targeted by some of the most powerful antituberculous drugs. To date, the molecular mechanisms by which these antibiotics affect the cell wall characteristics are not well understood. Here, we used atomic force microscopy – in three different modes – to probe the nanoscale surface properties of live mycobacteria and their modifications upon incubation with four antimycobacterial drugs: isoniazid, ethionamide, ethambutol, and streptomycine. Topographic imaging, combined with quantitative surface roughness analysis, demonstrated that all drugs induce a substantial increase of surface roughness to an extent that correlates with the localization of the target (i.e., synthesis of mycolic acids, arabinogalactans, or proteins). Chemical force microscopy with hydrophobic tips revealed that the structural alterations induced by isoniazid and ethambutol were correlated with a dramatic decrease of cell surface hydrophobicity, reflecting the removal of the outermost mycolic acid layer. Consistent with this finding, tapping mode imaging, combined with immunogold labeling, showed that the two drugs lead to the massive exposure of hydrophilic lipoarabinomannans at the surface. Taken together, these structural, chemical, and immunological data provide novel insight into the action mode of antimycobacterial drugs, as well as into the spatial organization of the mycobacterial cell wall.

Nanomechanical properties of dead or alive single-patterned bacteria.

The main goal of this paper is to probe mechanical properties of living and dead bacteria via atomic force microscopy (AFM) indentation experimentations. Nevertheless, the prerequisite for bioAFM study is the adhesion of the biological sample on a surface. Although AFM has now been used in microbiology for 20 years, the immobilization of micro-organisms is still challenging. Immobilizing a single cell, without the need for chemical fixation has therefore constituted our second purpose. Highly ordered arrays of single living bacteria were generated over the millimeter scale by selective adsorption of bacteria onto micrometric chemical patterns. The chemically engineered template surfaces were prepared with a microcontact printing process, and different functionalizations of the patterns by incubation were investigated. Thanks to this original immobilization strategy, the Young moduli of the same cell were measured using force spectroscopy before and after heating (45 degrees C, 20 min). The cells with a damaged membrane (after heating) present a Young modulus twice as high as that of healthy bacteria.

Nanostructure and nanomechanics of live Phaeodactylum tricornutum morphotypes

The ultrastructure and mechanical properties of the fusiform, triradiate and ovoid morphotypes of Phaeodactylum tricornutum were investigated using atomic force microscopy. Using topographic imaging, we showed that the surface of the ovoid form is rougher than those of the two other specimens, and coated with an outer layer of extracellular polymers. Using spatially resolved force-indentation curves, we found that the valve of the ovoid form is about five times stiffer (Young modulus of approximately 500 kPa) than those of the other forms (approximately 100 kPa), a finding fully consistent with the fact that only the ovoid form has a silica valve, whereas the valves in the other two consist mostly of organic material. Notably, the girdle region of both fusiform and ovoid forms was five times softer than the valve, suggesting that this region is poor in silica and enriched in organic material. For the triradiate form, we showed the arms to be softer than the core region, presumably as a result of organelle localization. Last, we observed mucilaginous footprints of moderate stiffness (approximately 100 kPa) in the vicinity of ovoid diatoms, which we believe are secreted extracellular polymers.

Deletion of the α-(1,3)-glucan synthase genes induces a restructuring of the conidial cell wall responsible for the avirulence of Aspergillus fumigatus.

α-(1,3)-Glucan is a major component of the cell wall of Aspergillus fumigatus, an opportunistic human fungal pathogen. There are three genes (AGS1, AGS2 and AGS3) controlling the biosynthesis of α-(1,3)-glucan in this fungal species. Deletion of all the three AGS genes resulted in a triple mutant that was devoid of α-(1,3)-glucan in its cell wall; however, its growth and germination was identical to that of the parental strain in vitro. In the experimental murine aspergillosis model, this mutant was less pathogenic than the parental strain. The AGS deletion resulted in an extensive structural modification of the conidial cell wall, especially conidial surface where the rodlet layer was covered by an amorphous glycoprotein matrix. This surface modification was responsible for viability reduction of conidia in vivo, which explains decrease in the virulence of triple agsΔ mutant.

Cell Wall Remodeling Enzymes Modulate Fungal Cell Wall Elasticity and Osmotic Stress Resistance

ABSTRACT The fungal cell wall confers cell morphology and protection against environmental insults. For fungal pathogens, the cell wall is a key immunological modulator and an ideal therapeutic target. Yeast cell walls possess an inner matrix of interlinked β-glucan and chitin that is thought to provide tensile strength and rigidity. Yeast cells remodel their walls over time in response to environmental change, a process controlled by evolutionarily conserved stress (Hog1) and cell integrity (Mkc1, Cek1) signaling pathways. These mitogen-activated protein kinase (MAPK) pathways modulate cell wall gene expression, leading to the construction of a new, modified cell wall. We show that the cell wall is not rigid but elastic, displaying rapid structural realignments that impact survival following osmotic shock. Lactate-grown Candida albicans cells are more resistant to hyperosmotic shock than glucose-grown cells. We show that this elevated resistance is not dependent on Hog1 or Mkc1 signaling and that most cell death occurs within 10 min of osmotic shock. Sudden decreases in cell volume drive rapid increases in cell wall thickness. The elevated stress resistance of lactate-grown cells correlates with reduced cell wall elasticity, reflected in slower changes in cell volume following hyperosmotic shock. The cell wall elasticity of lactate-grown cells is increased by a triple mutation that inactivates the Crh family of cell wall cross-linking enzymes, leading to increased sensitivity to hyperosmotic shock. Overexpressing Crh family members in glucose-grown cells reduces cell wall elasticity, providing partial protection against hyperosmotic shock. These changes correlate with structural realignment of the cell wall and with the ability of cells to withstand osmotic shock. IMPORTANCE The C. albicans cell wall is the first line of defense against external insults, the site of immune recognition by the host, and an attractive target for antifungal therapy. Its tensile strength is conferred by a network of cell wall polysaccharides, which are remodeled in response to growth conditions and environmental stress. However, little is known about how cell wall elasticity is regulated and how it affects adaptation to stresses such as sudden changes in osmolarity. We show that elasticity is critical for survival under conditions of osmotic shock, before stress signaling pathways have time to induce gene expression and drive glycerol accumulation. Critical cell wall remodeling enzymes control cell wall flexibility, and its regulation is strongly dependent on host nutritional inputs. We also demonstrate an entirely new level of cell wall dynamism, where significant architectural changes and structural realignment occur within seconds of an osmotic shock. The C. albicans cell wall is the first line of defense against external insults, the site of immune recognition by the host, and an attractive target for antifungal therapy. Its tensile strength is conferred by a network of cell wall polysaccharides, which are remodeled in response to growth conditions and environmental stress. However, little is known about how cell wall elasticity is regulated and how it affects adaptation to stresses such as sudden changes in osmolarity. We show that elasticity is critical for survival under conditions of osmotic shock, before stress signaling pathways have time to induce gene expression and drive glycerol accumulation. Critical cell wall remodeling enzymes control cell wall flexibility, and its regulation is strongly dependent on host nutritional inputs. We also demonstrate an entirely new level of cell wall dynamism, where significant architectural changes and structural realignment occur within seconds of an osmotic shock.

Stress disrupts intestinal mucus barrier in rats via mucin O-glycosylation shift: prevention by a probiotic treatment.

Despite well-known intestinal epithelial barrier impairment and visceral hypersensitivity in irritable bowel syndrome (IBS) patients and IBS-like models, structural and physical changes in the mucus layer remain poorly understood. Using a water avoidance stress (WAS) model, we aimed at evaluating whether 1) WAS modified gut permeability, visceral sensitivity, mucin expression, biochemical structure of O-glycans, and related mucus physical properties, and 2) whether Lactobacillus farciminis treatment prevented these alterations. Wistar rats received orally L. farciminis or vehicle for 14 days; at day 10, they were submitted to either sham or 4-day WAS. Intestinal paracellular permeability and visceral sensitivity were measured in vivo. The number of goblet cells and Muc2 expression were evaluated by histology and immunohistochemistry, respectively. Mucosal adhesion of L. farciminis was determined ex situ. The mucin O-glycosylation profile was obtained by mass spectrometry. Surface imaging of intestinal mucus was performed at nanoscale by atomic force microscopy. WAS induced gut hyperpermeability and visceral hypersensitivity but did not modify either the number of intestinal goblet cells or Muc2 expression. In contrast, O-glycosylation of mucins was strongly affected, with the appearance of elongated polylactosaminic chain containing O-glycan structures, associated with flattening and loss of the mucus layer cohesive properties. L. farciminis bound to intestinal Muc2 and prevented WAS-induced functional alterations and changes in mucin O-glycosylation and mucus physical properties. WAS-induced functional changes were associated with mucus alterations resulting from a shift in O-glycosylation rather than from changes in mucin expression. L. farciminis treatment prevented these alterations, conferring epithelial and mucus barrier strengthening.

Nanoscale analysis of the effects of antibiotics and CX1 on a Pseudomonas aeruginosa multidrug-resistant strain

Drug resistance is a challenge that can be addressed using nanotechnology. We focused on the resistance of the bacteria Pseudomonas aeruginosa and investigated, using Atomic Force Microscopy (AFM), the behavior of a reference strain and of a multidrug resistant clinical strain, submitted to two antibiotics and to an innovative antibacterial drug (CX1). We measured the morphology, surface roughness and elasticity of the bacteria under physiological conditions and exposed to the antibacterial molecules. To go further in the molecules action mechanism, we explored the bacterial cell wall nanoscale organization using functionalized AFM tips. We have demonstrated that affected cells have a molecularly disorganized cell wall; surprisingly long molecules being pulled off from the cell wall by a lectin probe. Finally, we have elucidated the mechanism of action of CX1: it destroys the outer membrane of the bacteria as demonstrated by the results on artificial phospholipidic membranes and on the resistant strain.

Cell wall as a target for bacteria inactivation by pulsed electric fields

The integrity and morphology of bacteria is sustained by the cell wall, the target of the main microbial inactivation processes. One promising approach to inactivation is based on the use of pulsed electric fields (PEF). The current dogma is that irreversible cell membrane electro-permeabilisation causes the death of the bacteria. However, the actual effect on the cell-wall architecture has been poorly explored. Here we combine atomic force microscopy and electron microscopy to study the cell-wall organization of living Bacillus pumilus bacteria at the nanoscale. For vegetative bacteria, exposure to PEF led to structural disorganization correlated with morphological and mechanical alterations of the cell wall. For spores, PEF exposure led to the partial destruction of coat protein nanostructures, associated with internal alterations of cortex and core. Our findings reveal for the first time that the cell wall and coat architecture are directly involved in the electro-eradication of bacteria.