Eva Mateo-Martí

Single layers of a multifunctional laminar Cu(I,II) coordination polymer

A multifunctional bidimensional mixed-valence copper coordination polymer [Cu2Br(IN)2]n (IN = isonicotinato) has been characterized in crystal phase and isolated on graphite surface as single sheets.

Synthesis of cobalt ferrite core/metallic shell nanoparticles for the development of a specific PNA/DNA biosensor

Controlled synthesis of cobalt ferrite superparamagnetic nanoparticles covered with a gold shell has been achieved by an affinity and trap strategy. Magnetic nanoparticles are functionalized with a mixture of amino and thiol groups that facilitate the electrostatic attraction and further chemisorption of gold nanoparticles, respectively. Using these nanoparticles as seeds, a complete coating shell is achieved by gold salt-iterative reduction leading to monodisperse water-soluble gold-covered magnetic nanoparticles, with an average diameter ranging from 21 to 29 nm. These constitute a versatile platform for immobilization of biomolecules via thiol chemistry, which is exemplified by the immobilization of peptide nucleic acid (PNA) oligomers that specifically hybridize with complementary DNA molecules in solution. Hybridation with DNA probes has been measured using Rhodamine 6G fluorescence marker and the detection of a single nucleotide mutation has been achieved. These results suggest the PNA-nanoparticles application as a biosensor for DNA genotyping avoiding commonly time-consuming procedures employed.

Solvent‐Induced Delamination of a Multifunctional Two Dimensional Coordination Polymer

A coordination polymer is fully exfoliated by solvent-assisted interaction only. The soft-delamination process results from the structure of the starting material, which shows a layered structure with weak layer-to-layer interactions and cavities with the ability to locate several solvents in an unselective way. These results represent a significant step forward towards the production of structurally designed one-molecule thick 2D materials with tailored physico-chemical properties.

Patterned conductive nanostructures from reversible self-assembly of 1D coordination polymer

In this study, the outstanding ability of the coordination polymer [Pt2(nBuCS2)4I]n (nBu = n-butyl) (1) to reversibly self-organize from solution was demonstrated. This feature allowed us to generate highly electrical conductive structures located upon demand on technologically relevant surfaces, by easy-to-handle and low cost micromolding in capillaries (MIMIC) and lithographically controlled wetting (LCW). Electrical characterization reveals a near Ohmic behaviour and a high stability of the stripes (in air). Electrodes produced by the MIMIC technique from a solution of compound 1 demonstrated that this material can be efficiently used as electrodes for organic field-effect transistors (OFETs).

A chamber for studying planetary environments and its applications to astrobiology

We have built a versatile environmental simulation chamber capable of reproducing atmospheric compositions and surface temperatures for most of the planetary objects. It has been especially developed to make feasible in situ irradiation and characterization of the sample under study. The total pressure in the chamber can range from 5 to 5 × 10−9 mbar. The required atmospheric composition is regulated via a residual gas analyser with ca ppm precision. Temperatures can be set from 4 K to 325 K. The sample under study can be irradiated with ion and electron sources, a deuterium ultraviolet (UV) lamp and a noble-gas discharge UV lamp. One of the main technological challenges of this device is to provide the user the possibility of performing ion and electron irradiation at a total pressure of 0.5 mbar. This is attained by means of an efficient differential pumping system. The in situ analysis techniques implemented are UV spectroscopy and infrared spectroscopy (IR). This machine is especially suitable for following the chemical changes induced in a particular sample by irradiation in a controlled environment. Therefore, it can be used in different disciplines such as planetary geology, astrobiology, environmental chemistry, materials science and for instrumentation testing.

Assessing Antibody Microarrays for Space Missions: Effect of Long-Term Storage, Gamma Radiation, and Temperature Shifts on Printed and Fluorescently Labeled Antibodies

Antibody microarrays are becoming frequently used tools for analytical purposes. A key factor for optimal performance is the stability of the immobilized (capturing) antibodies as well as those that have been fluorescently labeled to achieve the immunological test (tracers). This is especially critical for long-distance transport, field testing, or planetary exploration. A number of different environmental stresses may affect the antibody integrity, such as dryness, sudden temperature shift cycles, or, as in the case of space science, exposure to large quantities of the highly penetrating gamma radiation. Here, we report on the effect of certain stabilizing solutions for long-term storage of printed antibody microarrays under different conditions. We tested the effect of gamma radiation on printed and freeze- or vacuum-dried fluorescent antibodies at working concentrations (tracer antibodies), as well as the effect of multiple cycles of sudden and prolonged temperature shifts on the stability of fluorescently labeled tracer antibody cocktails. Our results show that (i) antibody microarrays are stable at room temperature when printed on stabilizing spotting solutions for at least 6 months, (ii) lyophilized and vacuum-dried fluorescently labeled tracer antibodies are stable for more than 9 months of sudden temperature shift cycles (-20°C to 25°C and 50°C), and (iii) both printed and freeze- or vacuum-dried fluorescent tracer antibodies are stable after several-fold excess of the dose of gamma radiation expected during a mission to Mars. Although different antibodies may exhibit different susceptibilities, we conclude that, in general, antibodies are suitable for use in planetary exploration purposes if they are properly treated and stored with the use of stabilizing substances.

Azafullerene-like Nanosized Clusters

Carbon nitride materials have extraordinary potential in various applications, including catalysts, filled-particles, and superhard materials. Carbon nitride nanoclusters have been prepared under mild solvothermal conditions by a reaction between 1,3,5-trichlotriazine and sodium azide in toluene. The bulk material formed has a C(3)N(4) composition and consists of spheres with diameters ranging from approximately 1 nm to 4 mum. Nanometer-sized clusters of C(3)N(4) stoichiometry have been isolated on surfaces by sublimation or simple physicochemical methods. The clusters have then been characterized by atomic force microscopy and X-ray photoelectron spectroscopy. The laser desorption ionization mass spectra show peaks assignable to the C(12)N(16), C(21)N(28), and C(33)N(44) molecules which could correspond to cage structures with 4, 7, and 11 units of the C(3)N(4) subunit, respectively. The structure and stability of these new nitrogen-rich carbon nitride nanocages has been investigated using density functional theory calculations.

Fossilization of acidophilic microorganisms.

This study examines fossil microorganisms found in iron-rich deposits in an extreme acidic environment, the Tinto River in SW Spain. Both electron microscopy (SEM and TEM) and non-destructive in situ microanalytical techniques (EDS, EMP and XPS) were used to determine the role of permineralization and encrustation in preserving microorganisms forming biofilms in the sediments. Unicellular algae were preserved by silica permineralization of their cell walls. Bacterial biofilms were preserved as molds by epicellular deposition of schwertmannite around them. In the case of fungi and filamentous algae, we observed permineralization of cell structures by schwertmannite in the sediments. The extracellular polymeric matrix around the cells was also preserved through permineralization of the fibrillar component. The process of permineralization and deposition of iron-rich precipitates present in the acidic waters of Rio Tinto served to preserve many microfossils in an oxidizing environment, in which organic compounds would not normally be expected to persist. Studies of microbial fossil formation mechanisms in modern extreme environments should focus on defining criteria to identify inorganic traces of microbial life in past environments on Earth or other planets.

Surface assembly of porphyrin nanorods with one-dimensional zinc–oxygen spinal cords

We have built long-range ordered, one-dimensional (1D) nanorods by self-assembly of zinc porphyrin derivatives through axial coordination with oxygenated ligands on different noble-metal surfaces. The structures were studied by a combination of Variable-Temperature Scanning-Tunnelling Microscopy (VT-STM), X-Ray Photoelectron Spectroscopy (XPS) and Density Functional Theory (DFT) calculations. The combined morphological, chemical and theoretical results demonstrate that the zinc atoms at neighbouring porphyrin molecules are coordinatively linked through oxygen-containing species, most probably water, leading to an adsorption geometry in which the porphyrin planes are perpendicular to the substrate plane, and the polymers are lying parallel to the surface.

Ultraviolet Photostability of Adenine on Gold and Silicon Surfaces

The adenine molecule is a DNA nucleobase, an essential component of genetic material. Because of the important role of DNA nucleobases in terrestrial biochemistry, we have studied the molecular adsorption, orientation, and chemical binding of adenine on metallic and semiconducting surfaces, such as gold and silicon, respectively, and their stability toward ultraviolet radiation by X-ray photoelectron spectroscopy (XPS) and reflection absorption infrared spectroscopy (RAIRS) techniques. We have exposed the adenine surface system to UV radiation (200-400 nm) under a high-vacuum environment (10(-7) mbar) to study the photostability and photochemistry of adenine on different surfaces. After 10 or 24 hours of exposure under interplanetary space conditions, UV radiation induces desorption and partial dissociation of the molecule, which is dependant on the nature of the surface. The electronic excitations, induced in the material by UV absorption, play a major role in the photodestruction of the absorbed molecules on the solid surfaces.