F. Al-Marzouki

Synthesis and characterization of one‐dimensional vertically aligned Sb‐doped ZnO nanowires

Vertically aligned undoped ZnO and Sb-doped ZnO nanowires have been synthesized on a silicon substrate using the vapor–solid technique, without using a catalyst or predeposited buffer layers. The structure and morphology of the assynthesized nanowires are characterized using X-ray diffraction, scanning and transmission electron microscopies, selected area electron diffraction, and electron dispersive X-ray spectroscopy. The results showed that the use of Si(111) is a critical factor for the growth of vertically aligned nanowires. This is a result of the lattice match on Si(111), which is more favorable with the ZnO lattice structure because the Si(111) surface is hexagonal and has a smaller lattice constant of 3.840 Å. The photoluminescence properties were also investigated at room temperature (300 K). The UV peaks of undoped and Sbdoped ZnO nanowires are located at 3.33 and 3.29 eV, respectively. This redshift of 0.04 eV in the Sb-doped ZnO indicates a reduction of the ZnO band gap caused by the Sb dopant. The temperature-dependent photoluminescence spectra of Sb-doped ZnO nanowires from 10 to 300 K were also examined. This measurement showed that at 10 K several peaks appear, at 3.36, 3.23 and 3.04 eV, which were assigned as acceptor-bound excitons, a donor–acceptor pair and a zinc-vacancy-related peak, respectively. These peaks are shifted with the increase of temperature up to 300 K.

Different Technical Applications of Carbon Nanotubes

Carbon nanotubes have been of great interest because of their simplicity and ease of synthesis. The novel properties of nanostructured carbon nanotubes such as high surface area, good stiffness, and resilience have been explored in many engineering applications. Research on carbon nanotubes have shown the application in the field of energy storage, hydrogen storage, electrochemical supercapacitor, field-emitting devices, transistors, nanoprobes and sensors, composite material, templates, etc. For commercial applications, large quantities and high purity of carbon nanotubes are needed. Different types of carbon nanotubes can be synthesized in various ways. The most common techniques currently practiced are arc discharge, laser ablation, and chemical vapor deposition and flame synthesis. The purification of CNTs is carried out using various techniques mainly oxidation, acid treatment, annealing, sonication, filtering chemical functionalization, etc. However, high-purity purification techniques still have to be developed. Real applications are still under development. This paper addresses the current research on the challenges that are associated with synthesis methods, purification methods, and dispersion and toxicity of CNTs within the scope of different engineering applications, energy, and environmental impact.

Development and Applications of Highly Functional Al-based Materials by Use of Metastable Phases

This paper reviews the features of alloy components, structure and mechanical properties, physical and chemical properties of metastable Al-based alloys developed by use of various liquid or vapor quenching-induced phases such as amorphous, quasicrystalline, nanocrystalline, nanocomposite, supersaturated solid solution and structure gradient phases. As advantages of the metastable Al-based alloys, one can exemplify a high tensile strength of 1500 MPa for amorphous alloys, high elevated temperature strength of 364 MPa at 573 K for nanoquasicrystalline alloys, high strength of 1000 MPa at room temperature and 520 MPa at 473 K for nanocrystalline alloys, relatively high strength of 596 MPa with large elongation of 16% for nanocomposite alloys and high strength of 900 MPa and distinct elongation of 5% for supersaturated fcc-Al solid solution. These highly functional properties, which have not been obtained for conventional crystalline Al-based alloys, have enabled the commercialization of metastable Al-based alloys as structural, machinery and sporting goods materials. Owing to the significant increase of various fundamental properties caused by the essential differences in the structures, the engineering importance of the metastable Al-based alloys is expected to increase steadily in the future low carbon and nature harmonious society.

An evolutionary inspection game with labour unions on small-world networks

We study an evolutionary inspection game where agents can chose between working and shirking. The evolutionary process is staged on a small-world network, through which agents compare their incomes and, based on the outcome, decide which strategy to adopt. Moreover, we introduce union members that have certain privileges, of which the extent depends on the bargaining power of the union. We determine how the union affects the overall performance of the firm that employs the agents, and what are its influences on the employees. We find that, depending on its bargaining power, the union has significant leverage to deteriorate the productivity of a firm, and consequently also to lower the long-run benefits of the employees.

Novel Heating-Induced Reversion during Crystallization of Al-based Glassy Alloys.

Thermal stability and crystallization of three multicomponent glassy alloys, Al86Y7Ni5Co1Fe0.5Pd0.5, Al85Y8Ni5Co1Fe0.5Pd0.5 and Al84Y9Ni4Co1.5Fe0.5Pd1, were examined to assess the ability to form the mixture of amorphous (am) and fcc-aluminum (α-Al) phases. On heating, the glass transition into the supercooled liquid is shown by the 85Al and 84Al glasses. The crystallization sequences are [am] → [am + α-Al] → [α-Al + compounds] for the 86Al and 85Al alloys, and [am] → [am + α-Al + cubic AlxMy (M = Y, Ni, Co, Fe, Pd)] → [am + α-Al] → [α-Al + Al3Y + Al9(Co, Ni)2 + unknown phase] for the 84Al alloy. The glass transition appears even for the 85Al alloy where the primary phase is α-Al. The heating-induced reversion from [am + α-Al + multicomponent AlxMy] to [am + α-Al] for the 84Al alloy is abnormal, not previously observed in crystallization of glassy alloys, and seems to originate from instability of the metastable AlxMy compound, in which significant inhomogeneous strain is caused by the mixture of solute elements. This novel reversion phenomenon is encouraging for obtaining the [am + α-Al] mixture over a wide range of high temperature effective for the formation of Al-based high-strength nanostructured bulk alloys by warm working.

Dye Sensitized Solar Cells with Low Cost Carbon Nanotubes Electrodes

Dye sensitized solar cells (DSSCs) are very sensitive to electrodes, due to either high cost or easy corrosion problems. To minimize these factors, we present DSSCs with cheap carbon nanotubes as counter electrodes. In addition, we suggest replacing the electrolyte (in typical DSSCs) with a solid film of powdered CsSnI3. The electrical behavior (I-V characteristics) of the proposed device has been measured for different shading conditions. In the light of a theoretical model based on the presence of two diodes, the experimental data have been explained, taking into account a new equivalent circuit for the DSSC. These DSSCs may receive different levels of sun radiation, which stimulates the study of partial shading; so, we have studied the effect of different shadow rates on the solar conversion efficiency of a unit of 4-W-connected DSSCs. The validity of the present model has been examined by fitting it into I-V characteristics at different shading rates.

Formation of Transition Metal Cluster Adducts on the Surface of Single-walled Carbon Nanotubes: HRTEM Studies

We report the formation of chromium clusters on the outer walls of single-walled carbon nanotubes (SWNTs). The clusters were obtained by reacting purified SWNTs with chromium hexacarbonyl in dibutyl ether at 100°C. The functionalized SWNTs were characterized by thermogravimetic analysis, XPS, and high-resolution TEM. The curvature of the SWNTs and the high mobility of the chromium moieties on graphitic surfaces allow the growth of the metal clusters and we propose a mechanism for their formation.

Effect of Addition of Colloidal Silica to Films of Polyimide, Polyvinylpyridine, Polystyrene, and Polymethylmethacrylate Nano-Composites

Nano-composite films have been the subject of extensive work for developing the energy-storage efficiency of electrostatic capacitors. Factors such as polymer purity, nanoparticle size, and film morphology drastically affect the electrostatic efficiency of the dielectric material that forms the insulating film between the conductive electrodes of a capacitor. This in turn affects the energy storage performance of the capacitor. In the present work, we have studied the dielectric properties of four highly pure amorphous polymer films: polymethyl methacrylate (PMMA), polystyrene, polyimide and poly-4-vinylpyridine. Comparison between the dielectric properties of these polymers has revealed that the higher breakdown performance is a character of polyimide (PI) and PMMA. Also, our experimental data shows that adding colloidal silica to PMMA and PI leads to a net decrease in the dielectric properties compared to the pure polymer.

Preparation and Characterization of Artificial Spider Silk Produced through Microchannel Techniques

Spider silk (SS) is naturally tough; however, it turns soft when wet by water. Spiders produce high-quality silk threads by adjusting the molecular assemblage of SS-proteins and the arrangements structure of threads and recombinant spider dragline silk (RSDS). The general wet spinning techniques for producing recombinant spidroins results in uncorrected explanation to the natural spinning technique. In this study, we use tailored-SS with relative low molecular weight of 47 kD to produce a water-soluble RSDS protein. We built a microfluidic ship and used it to spun SS using aqueous solutions-micro-technique (wet spinning). This was done in order to mimic the spider-spinning processes using a steady post-spin drawing process. We succeeded to produce assemblies of spidroins with fibril structure. Then, compact constituting of micro-threads followed these wet spinning processes. Wet spinning was followed by improving the orientation, crystalline structure, and fibril melting of the hierarchical structure. The initial mechanical characterization (tensile strength) of the RSDSs attained about 510 MPa with respective extension 44%.

Corrigendum: An evolutionary inspection game with labour unions on small-world networks.

We study an evolutionary inspection game where agents can chose between working and shirking. The evolutionary process is staged on a small-world network, through which agents compare their incomes and, based on the outcome, decide which strategy to adopt. Moreover, we introduce union members that have certain privileges, of which the extent depends on the bargaining power of the union. We determine how the union affects the overall performance of the firm that employs the agents, and what are its influences on the employees. We find that, depending on its bargaining power, the union has significant leverage to deteriorate the productivity of a firm, and consequently also to lower the long-run benefits of the employees.