F. Fortuna

Orientational Tuning of the Fermi Sea of Confined Electrons at theSrTiO3(110) and (111) Surfaces

We report the existence of confined electronic states at the (110) and (111) surfaces of SrTiO3. Using angle-resolved photoemission spectroscopy, we find that the corresponding Fermi surfaces, subband masses, and orbital ordering are different from the ones at the (001) surface of SrTiO3. This occurs because the crystallographic symmetries of the surface and sub-surface planes, and the electron effective masses along the confinement direction, influence the symmetry of the electronic structure and the orbital ordering of the t2g manifold. Remarkably, our analysis of the data also reveals that the carrier concentration and thickness are similar for all three surface orientations, despite their different polarities. The orientational tuning of the microscopic properties of two-dimensional electron states at the surface of SrTiO3 echoes the tailoring of macroscopic (e.g. transport) properties reported recently in LaAlO3/SrTiO3 (110) and (111) interfaces, and is promising for searching new types of 2D electronic states in correlated-electron oxides.

Engineering two-dimensional electron gases at the (001) and (101) surfaces ofTiO2anatase using light

We report the existence of metallic two-dimensional electron gases (2DEGs) at the (001) and (101) surfaces of bulk-insulating TiO2 anatase due to local chemical doping by oxygen vacancies in the near-surface region. Using angle-resolved photoemission spectroscopy, we find that the electronic structure at both surfaces is composed of two occupied subbands of d_xy orbital character. While the Fermi surface observed at the (001) termination is isotropic, the 2DEG at the (101) termination is anisotropic and shows a charge carrier density three times larger than at the (001) surface. Moreover, we demonstrate that intense UV synchrotron radiation can alter the electronic structure and stoichiometry of the surface up to the complete disappearance of the 2DEG. These results open a route for the nano-engineering of confined electronic states, the control of their metallic or insulating nature, and the tailoring of their microscopic symmetry, using UV illumination at different surfaces of anatase.

Universal Fabrication of 2D Electron Systems in Functional Oxides.

2D electron systems (2DESs) in functional oxides are promising for applications, but their fabrication and use, essentially limited to SrTiO3 -based heterostructures, are hampered by the need for growing complex oxide overlayers thicker than 2 nm using evolved techniques. It is demonstrated that thermal deposition of a monolayer of an elementary reducing agent suffices to create 2DESs in numerous oxides.

Two-dimensional electron gas with six-fold symmetry at the (111) surface of KTaO3

Two-dimensional electron gases (2DEGs) at transition-metal oxide (TMO) interfaces, and boundary states in topological insulators, are being intensively investigated. The former system harbors superconductivity, large magneto-resistance, and ferromagnetism. In the latter, honeycomb-lattice geometry plus bulk spin-orbit interactions lead to topologically protected spin-polarized bands. 2DEGs in TMOs with a honeycomb-like structure could yield new states of matter, but they had not been experimentally realized, yet. We successfully created a 2DEG at the (111) surface of KTaO3, a strong insulator with large spin-orbit coupling. Its confined states form a network of weakly-dispersing electronic gutters with 6-fold symmetry, a topology novel to all known oxide-based 2DEGs. If those pertain to just one Ta-(111) bilayer, model calculations predict that it can be a topological metal. Our findings demonstrate that completely new electronic states, with symmetries not realized in the bulk, can be tailored in oxide surfaces, promising for TMO-based devices.

Geometry-related magnetic interference patterns in long SNSJosephson junctions

We have measured the critical current dependence on the magnetic flux of two long SNS junctions differing by the normal wire geometry. The samples are made by a Au wire connected to W contacts, via Focused Ion Beam assisted deposition. We could tune the magnetic pattern from the monotonic gaussian-like decay of a quasi 1D normal wire to the Fraunhofer-like pattern of a square normal wire. We explain the monotonic limit with a semiclassical 1D model, and we fit both field dependences with numerical simulations of the 2D Usadel equation. Furthermore, we observe both integer and fractional Shapiro steps. The magnetic flux dependence of the integer steps reproduces as expected that of the critical current Ic, while fractional steps decay slower with the flux than Ic.

Superconducting nanowires by electron-beam-induced deposition

Superconducting nanowires can be fabricated by decomposition of an organometallic gas using a focused beam of Ga ions. However, physical damage and unintentional doping often results from the exposure to the ion beam, motivating the search for a means to achieve similar structures with a beam of electrons instead of ions. This has so far remained an experimental challenge. We report the fabrication of superconducting tungsten nanowires by electron-beam-induced-deposition, with critical temperature of 2.0 K and critical magnetic field of 3.7 T, and compare them with superconducting wires made with ions. This work opens up new possibilities for the realization of nanoscale superconducting devices, without the requirement of an ion beam column.

2D surprises at the surface of 3D materials: Confined electron systems in transition metal oxides

Abstract The scope of this article is to review the state-of-the-art in the field of confined electron systems generated at the bare surfaces of transition metal oxides (TMOs). This scientific field is a prime example of a domain where two-dimensional physics and photoemission-based spectroscopic techniques have together set up the development of the story. The discovery of a high-mobility two-dimensional electron system (2DES) at interfaces of transition metal oxides has attracted an immense scientific interest due to new opportunities opened in the emerging field of oxide electronics. The subsequent paradigm shift from interfaces to the bare surfaces of TMOs made the confined electron system accessible to surface-sensitive spectroscopic techniques and this new era is the focus of the present article. We describe how results by means of Angle-Resolved Photoemission Spectroscopy (ARPES) establish the presence of confined electron carriers at the bare surface of SrTiO 3 (100), which exhibit complex physics phenomena such as orbital ordering, electron–phonon interactions and spin splitting. The key element behind the 2DES generation is oxygen vacancies. Moreover, we review the experimental evidence on the generation of 2DESs on surfaces with different orientation, as well as on different TMO substrates. The electronic structure of the confined electron system responds to such changes, thereby providing external means for engineering its properties. Finally, we identify new directions for future research by introducing a device-friendly fabrication protocol for the generation of 2DESs on TMO surfaces.

Two-dimensional electron systems in

We report the existence of a two-dimensional electron system (2DES) at the (001) surface of CaTiO3. Using angle-resolved photoemission spectroscopy, we find a hybridization between the d_xz and d_yz orbitals, not observed in the 2DESs at the surfaces of other ATiO3 perovskites, e.g. SrTiO3 or BaTiO3. Based on a comparison of the 2DES properties in these three materials, we show how the electronic structure of the 2DES (bandwidth, orbital order and electron density) is coupled to different typical lattice distortions in perovskites. The orbital hybridization in orthorhombic CaTiO3 results from the rotation of the oxygen octahedra, which can also occur at the interface of oxide heterostructures to compensate strain. More generally, the control of the orbital order in 2DES by choosing different A-site cations in perovskites offers a new gateway towards 2DESs in oxide heterostructures beyond SrTiO3.

A{\mathrm{TiO}}_{3}

We report the existence of a two-dimensional electron system (2DES) at the (001) surface of CaTiO3. Using angle-resolved photoemission spectroscopy, we find a hybridization between the d_xz and d_yz orbitals, not observed in the 2DESs at the surfaces of other ATiO3 perovskites, e.g. SrTiO3 or BaTiO3. Based on a comparison of the 2DES properties in these three materials, we show how the electronic structure of the 2DES (bandwidth, orbital order and electron density) is coupled to different typical lattice distortions in perovskites. The orbital hybridization in orthorhombic CaTiO3 results from the rotation of the oxygen octahedra, which can also occur at the interface of oxide heterostructures to compensate strain. More generally, the control of the orbital order in 2DES by choosing different A-site cations in perovskites offers a new gateway towards 2DESs in oxide heterostructures beyond SrTiO3.