Fabian Zeitvogel

Potential role of nitrite for abiotic Fe(II) oxidation and cell encrustation during nitrate reduction by denitrifying bacteria

ABSTRACT Microorganisms have been observed to oxidize Fe(II) at neutral pH under anoxic and microoxic conditions. While most of the mixotrophic nitrate-reducing Fe(II)-oxidizing bacteria become encrusted with Fe(III)-rich minerals, photoautotrophic and microaerophilic Fe(II) oxidizers avoid cell encrustation. The Fe(II) oxidation mechanisms and the reasons for encrustation remain largely unresolved. Here we used cultivation-based methods and electron microscopy to compare two previously described nitrate-reducing Fe(II) oxidizers ( Acidovorax sp. strain BoFeN1 and Pseudogulbenkiania sp. strain 2002) and two heterotrophic nitrate reducers (Paracoccus denitrificans ATCC 19367 and P. denitrificans Pd 1222). All four strains oxidized ∼8 mM Fe(II) within 5 days in the presence of 5 mM acetate and accumulated nitrite (maximum concentrations of 0.8 to 1.0 mM) in the culture media. Iron(III) minerals, mainly goethite, formed and precipitated extracellularly in close proximity to the cell surface. Interestingly, mineral formation was also observed within the periplasm and cytoplasm; intracellular mineralization is expected to be physiologically disadvantageous, yet acetate consumption continued to be observed even at an advanced stage of Fe(II) oxidation. Extracellular polymeric substances (EPS) were detected by lectin staining with fluorescence microscopy, particularly in the presence of Fe(II), suggesting that EPS production is a response to Fe(II) toxicity or a strategy to decrease encrustation. Based on the data presented here, we propose a nitrite-driven, indirect mechanism of cell encrustation whereby nitrite forms during heterotrophic denitrification and abiotically oxidizes Fe(II). This work adds to the known assemblage of Fe(II)-oxidizing bacteria in nature and complicates our ability to delineate microbial Fe(II) oxidation in ancient microbes preserved as fossils in the geological record.

Helium Ion Microscopy (HIM) for the imaging of biological samples at sub-nanometer resolution

Scanning Electron Microscopy (SEM) has long been the standard in imaging the sub-micrometer surface ultrastructure of both hard and soft materials. In the case of biological samples, it has provided great insights into their physical architecture. However, three of the fundamental challenges in the SEM imaging of soft materials are that of limited imaging resolution at high magnification, charging caused by the insulating properties of most biological samples and the loss of subtle surface features by heavy metal coating. These challenges have recently been overcome with the development of the Helium Ion Microscope (HIM), which boasts advances in charge reduction, minimized sample damage, high surface contrast without the need for metal coating, increased depth of field, and 5 angstrom imaging resolution. We demonstrate the advantages of HIM for imaging biological surfaces as well as compare and contrast the effects of sample preparation techniques and their consequences on sub-nanometer ultrastructure.

Characterization of the physiology and cell-mineral interactions of the marine anoxygenic phototrophic Fe(II) oxidizer Rhodovulum iodosum--implications for Precambrian Fe(II) oxidation.

Anoxygenic phototrophic Fe(II)-oxidizing bacteria (photoferrotrophs) are suggested to have contributed to the deposition of banded iron formations (BIFs) from oxygen-poor seawater. However, most studies evaluating the contribution of photoferrotrophs to Precambrian Fe(II) oxidation have used freshwater and not marine strains. Therefore, we investigated the physiology and mineral products of Fe(II) oxidation by the marine photoferrotroph Rhodovulum iodosum. Poorly crystalline Fe(III) minerals formed initially and transformed to more crystalline goethite over time. During Fe(II) oxidation, cell surfaces were largely free of minerals. Instead, the minerals were co-localized with EPS suggesting that EPS plays a critical role in preventing cell encrustation, likely by binding Fe(III) and directing precipitation away from cell surfaces. Fe(II) oxidation rates increased with increasing initial Fe(II) concentration (0.43-4.07 mM) under a light intensity of 12 μmol quanta m(-2) s(-1). Rates also increased as light intensity increased (from 3 to 20 μmol quanta m(-2) s(-1)), while the addition of Si did not significantly change Fe(II) oxidation rates. These results elaborate on how the physical and chemical conditions present in the Precambrian ocean controlled the activity of marine photoferrotrophs and confirm the possibility that such microorganisms could have oxidized Fe(II), generating the primary Fe(III) minerals that were then deposited to some Precambrian BIFs.

Organic Carbon and Reducing Conditions Lead to Cadmium Immobilization by Secondary Fe Mineral Formation in a pH-Neutral Soil

Cadmium (Cd) is of environmental relevance as it enters soils via Cd-containing phosphate fertilizers and endangers human health when taken up by crops. Cd is known to associate with Fe(III) (oxyhydr)oxides in pH-neutral to slightly acidic soils, though it is not well understood how the interrelation of Fe and Cd changes under Fe(III)-reducing conditions. Therefore, we investigated how the mobility of Cd changes when a Cd-bearing soil is faced with organic carbon input and reducing conditions. Using fatty acid profiles and quantitative PCR, we found that both fermenting and Fe(III)-reducing bacteria were stimulated by organic carbon-rich conditions, leading to significant Fe(III) reduction. The reduction of Fe(III) minerals was accompanied by increasing soil pH, increasing dissolved inorganic carbon, and decreasing Cd mobility. SEM-EDX mapping of soil particles showed that a minor fraction of Cd was transferred to Ca- and S-bearing minerals, probably carbonates and sulfides. Most of the Cd, however, correlated with a secondary iron mineral phase that was formed during microbial Fe(III) mineral reduction and contained mostly Fe, suggesting an iron oxide mineral such as magnetite (Fe3O4). Our data thus provide evidence that secondary Fe(II) and Fe(II)/Fe(III) mixed minerals could be a sink for Cd in soils under reducing conditions, thus decreasing the mobility of Cd in the soil.

ScatterJ: An ImageJ plugin for the evaluation of analytical microscopy datasets

We present ScatterJ, an ImageJ plugin that allows for extracting qualitative as well as quantitative information from analytical microscopy datasets. A large variety of analytical microscopy methods are used to obtain spatially resolved chemical information. The resulting datasets are often large and complex, and can contain information that is not obvious or directly accessible. ScatterJ extends and complements existing methods to extract information on correlation and colocalization from pairs of species‐specific or element‐specific maps. We demonstrate the possibilities to extract information using example datasets from biogeochemical studies, although the plugin is not restricted to this type of research. The information that we could extract from our existing data helped to further our understanding of biogeochemical processes such as mineral formation or heavy metal sorption. ScatterJ can be used for a variety of different two‐dimensional (2D) and three‐dimensional (3D) datasets such as energy‐dispersive X‐ray spectroscopy maps, 3D confocal laser scanning microscopy maps, and 2D scanning transmission X‐ray microscopy maps.

Synchrotron-based chemical nano-tomography of microbial cell-mineral aggregates in their natural, hydrated state.

Chemical nano-tomography of microbial cells in their natural, hydrated state provides direct evidence of metabolic and chemical processes. Cells of the nitrate-reducing Acidovorax sp. strain BoFeN1 were cultured in the presence of ferrous iron. Bacterial reduction of nitrate causes precipitation of Fe(III)-(oxyhydr)oxides in the periplasm and in direct vicinity of the cells. Nanoliter aliquots of cell-suspension were injected into custom-designed sample holders wherein polyimide membranes collapse around the cells by capillary forces. The immobilized, hydrated cells were analyzed by synchrotron-based scanning transmission X-ray microscopy in combination with angle-scan tomography. This approach provides three-dimensional (3D) maps of the chemical species in the sample by employing their intrinsic near-edge X-ray absorption properties. The cells were scanned through the focus of a monochromatic soft X-ray beam at different, chemically specific X-ray energies to acquire projection images of their corresponding X-ray absorbance. Based on these images, chemical composition maps were then calculated. Acquiring projections at different tilt angles allowed for 3D reconstruction of the chemical composition. Our approach allows for 3D chemical mapping of hydrated samples and thus provides direct evidence for the localization of metabolic and chemical processes in situ.

Submicron-Scale Heterogeneities in Nickel Sorption of Various Cell–Mineral Aggregates Formed by Fe(II)-Oxidizing Bacteria

Fe(II)-oxidizing bacteria form biogenic cell-mineral aggregates (CMAs) composed of microbial cells, extracellular organic compounds, and ferric iron minerals. CMAs are capable of immobilizing large quantities of heavy metals, such as nickel, via sorption processes. CMAs play an important role for the fate of heavy metals in the environment, particularly in systems characterized by elevated concentrations of dissolved metals, such as mine drainage or contaminated sediments. We applied scanning transmission (soft) X-ray microscopy (STXM) spectrotomography for detailed 3D chemical mapping of nickel sorbed to CMAs on the submicron scale. We analyzed different CMAs produced by phototrophic or nitrate-reducing microbial Fe(II) oxidation and, in addition, a twisted stalk structure obtained from an environmental biofilm. Nickel showed a heterogeneous distribution and was found to be preferentially sorbed to biogenically precipitated iron minerals such as Fe(III)-(oxyhydr)oxides and, to a minor extent, associated with organic compounds. Some distinct nickel accumulations were identified on the surfaces of CMAs. Additional information obtained from scatter plots and angular distance maps, showing variations in the nickel-iron and nickel-organic carbon ratios, also revealed a general correlation between nickel and iron. Although a high correlation between nickel and iron was observed in 2D maps, 3D maps revealed this to be partly due to projection artifacts. In summary, by combining different approaches for data analysis, we unambiguously showed the heterogeneous sorption behavior of nickel to CMAs.

Comparison of Preparation Methods of Bacterial Cell-Mineral Aggregates for SEM Imaging and Analysis Using the Model System of Acidovorax sp. BoFeN1

ABSTRACT Innovative microanalytical methods are valuable tools in geomicrobiology. They often require the use of dried samples, demanding a challenging sample preparation. Since geomicrobiological samples typically have a strongly heterogeneous composition, choosing a preparation method is not straightforward. We therefore compared how different drying methods (critical point drying, hexamethyldisilazane drying, air drying and freeze drying) influence the structure of bacterial cell-mineral aggregates. Each method proved suitable for a specific purpose, but none was able to completely preserve the sample structure. Additional information was obtained on surface alterations by sputter coating and on preservation of extracellular polymeric substances during resin embedding.