Fabiola Pazos

Effects of lipid composition on membrane permeabilization by sticholysin I and II, two cytolysins of the sea anemone Stichodactyla helianthus.

Sticholysin I and II (St I and St II), two basic cytolysins purified from the Caribbean sea anemone Stichodactyla helianthus, efficiently permeabilize lipid vesicles by forming pores in their membranes. A general characteristic of these toxins is their preference for membranes containing sphingomyelin (SM). As a consequence, vesicles formed by equimolar mixtures of SM with phosphatidylcholine (PC) are very good targets for St I and II. To better characterize the lipid dependence of the cytolysin-membrane interaction, we have now evaluated the effect of including different lipids in the composition of the vesicles. We observed that at low doses of either St I or St II vesicles composed of SM and phosphatidic acid (PA) were permeabilized faster and to a higher extent than vesicles of PC and SM. As in the case of PC/SM mixtures, permeabilization was optimal when the molar ratio of PA/SM was ~1. The preference for membranes containing PA was confirmed by inhibition experiments in which the hemolytic activity of St I was diminished by pre-incubation with vesicles of different composition. The inclusion of even small proportions of PA into PC/SM LUVs led to a marked increase in calcein release caused by both St I and St II, reaching maximal effect at ~5 mol % of PA. Inclusion of other negatively charged lipids (phosphatidylserine (PS), phosphatidylglycerol (PG), phosphatidylinositol (PI), or cardiolipin (CL)), all at 5 mol %, also elicited an increase in calcein release, the potency being in the order CL approximately PA >> PG approximately PI approximately PS. However, some boosting effect was also obtained, including the zwitterionic lipid phosphatidylethanolamine (PE) or even, albeit to a lesser extent, the positively charged lipid stearylamine (SA). This indicated that the effect was not mediated by electrostatic interactions between the cytolysin and the negative surface of the vesicles. In fact, increasing the ionic strength of the medium had only a small inhibitory effect on the interaction, but this was actually larger with uncharged vesicles than with negatively charged vesicles. A study of the fluidity of the different vesicles, probed by the environment-sensitive fluorescent dye diphenylhexatriene (DPH), showed that toxin activity was also not correlated to the average membrane fluidity. It is suggested that the insertion of the toxin channel could imply the formation in the bilayer of a nonlamellar structure, a toroidal lipid pore. In this case, the presence of lipids favoring a nonlamellar phase, in particular PA and CL, strong inducers of negative curvature in the bilayer, could help in the formation of the pore. This possibility is confirmed by the fact that the formation of toxin pores strongly promotes the rate of transbilayer movement of lipid molecules, which indicates local disruption of the lamellar structure.

Purification and characterization of two hemolysins from Stichodactyla helianthus

Two hemolysins, Sticholysin I (St I) and Sticholysin II (St II) were purified from the sea anemone Stichodactyla helianthus combining gel filtration and ion exchange chromatography. The amino acid composition of both cytolysins was determined revealing a high proportion of glycine, lysine, tyrosine and non-polar amino acids (alanine, leucine and valine). Cysteine was not found in either polypeptide. Molecular masses of St I and St II were 19401 and 19290 Da, respectively. N-terminal sequence analysis of St I and St II showed a high homology between them suggesting they are isoforms of the same cytolysin. Compared with other sea anemone cytolysins, St I and St II contain a 22 amino acid insertion fragment also present in Eq T II/Tn C and probably in CaT I and Hm T and absent in C III, the major hemolysin previously reported in this anemone.

Sticholysins, two pore-forming toxins produced by the Caribbean Sea anemone Stichodactyla helianthus: Their interaction with membranes

Sticholysins (Sts) I and II (StI/II) are pore-forming toxins (PFTs) produced by the Caribbean Sea anemone Stichodactyla helianthus belonging to the actinoporin family, a unique class of eukaryotic PFTs exclusively found in sea anemones. As for the rest of the members of this family, Sts are cysteine-less proteins, with molecular weights around 20 kDa, high isoelectric points (>9.5), and a preference for sphingomyelin-containing membranes. A three-dimensional structure of StII, solved by X-ray crystallography, showed that it is composed of a hydrophobic beta-sandwich core flanked on the opposite sides by two alpha helices comprising residues 14-23 and 128-135. A variety of experimental results indicate that the first thirty N-terminal residues, which include one of the helices, are directly involved in pore formation. This region contains an amphipathic stretch, well conserved in all actinoporins, which is the only portion of the molecule that can change conformation without perturbing the general protein fold; in fact, binding to model membranes only produces a slight increase in the regular secondary structure content of Sts. Sts are produced in soluble form but they readily bind to different cell and model membrane systems such as lipidic monolayers, micelles, and lipid vesicles. Remarkably, both the binding and pore-formation steps are critically dependent on the physico-chemical nature of the membrane. In fact, a large population of toxin irreversibly binds with high affinity in membranes containing sphingomyelin whereas binding in membranes lacking this sphingolipid is relatively low and reversible. The joint presence of SM and cholesterol largely promotes binding and pore formation. Minor amounts of lipids favoring a non-lamellar organization also augment the efficiency of pore formation. The functional pore formed in cellular and model membranes has a diameter of approximately 2.0 nm and is presumably formed by the N-terminal alpha helices of four monomers tilted 31 degrees in relation to the bilayer normal. Experimental evidence supports the hypothesis that sticholysins, as well as equinatoxin II, another actinoporin, form a toroidal pore in membranes in which the polypeptide chains as well as the polar head groups of phospholipids are involved.

Properties of St I and St II, two isotoxins isolated from Stichodactyla helianthus: a comparison.

Sticholysins I and II are two highly hemolytic polypeptides purified from the Caribbean Sea anemone Stichodactyla helianthus. Their high sequence homology (93%) indicates that they correspond to isoforms of the same hemolysin. The spectroscopic measurements show a close similarity in the secondary structure content, conformation and stability of both toxins. Exposure of the toxins to high pHs (>11), a free radical source (AAPH), urea or temperature produce permanent changes in the toxin that lead to a significant loss of HA. It is significant to note that this loss of hemolytic activity occurs when other indicators, probably with the only exception of near-UV CD spectra, barely detect changes in the protein structure. This emphasizes the sensitivity of the protein function to changes in the macromolecule conformation. The most noticeable difference between both toxins is the considerably higher activity of St II, both measured in terms of erythrocyte internal K(+) exit or hemolysis; which is related to enthalpic factors. This difference is not due to an incomplete association of St I to the membrane. We consider then that the different pore forming capacity of both toxins in erythrocytes can be explained in terms of the difference in charge of the N-terminal fragment, than can considerably reduce the St I insertion rate in the membrane probably due to the negatively charged outer leaflet of the red blood cell, without a significant reduction of its capacity to bind to the cell membrane. This electrostatic effect, together with a slightly more relaxed structure in St II, could explain the higher pore forming capacity of St II in the red blood cell membrane.

The role of ionic strength on the enhancement of the hemolytic activity of sticholysin I, a cytolysin from Stichodactyla helianthus.

Sticholysin I (St I) is a potent cytolytic polypeptide purified from the Caribbean sea anemone Stichodactyla helianthus. The hemolytic activity of sticholysin is potentiated by its preincubation at high ionic strengths. In the present work the mechanism of the potentiating action of the medium ionic strength on the toxin hemolytic capacity is investigated. It is suggested that preincubation with high saline concentration induces a transition of St I to a more relaxed conformation that facilitates the lytic process.

Validation of a mutant of the pore-forming toxin sticholysin-I for the construction of proteinase-activated immunotoxins

The use of pore-forming toxins from sea anemones (actinoporins) in the construction of immunotoxins (ITs) against tumour cells is an alternative for cancer therapy. However, the main disadvantage of actinoporin-based ITs obtained so far has been the poor cellular specificity associated with the toxins ability to bind and exert its activity in almost any cell membrane. Our final goal is the construction of tumour proteinase-activated ITs using a cysteine mutant at the membrane binding region of sticholysin-I (StI), a cytolysin isolated from the sea anemone Stichodactyla helianthus. The mutant and the ligand moiety would be linked by proteinase-sensitive peptides through the StI cysteine residue blocking the toxin binding region and hence the IT non-specific killing activity. To accomplish this objective the first step was to obtain the mutant StI W111C, and to evaluate the impact of mutating tryptophan 111 by cysteine on the toxin pore-forming capacity. After proteolysis of the cleavage sequence, a short peptide would remain attached to the toxin. The next step was to evaluate whether this mutant is able to form pores even with a residual peptide linked to cysteine 111. In this work we demonstrated that (i) StI W111C shows pore-forming capacity in a nanomolar range, although it is 8-fold less active than the wild-type recombinant StI, corroborating the previously reported importance of residue 111 for the binding of StI to membranes, and (ii) the mutant is able to form pores even with a residual seven-residue peptide linked to cysteine 111. In addition, it was demonstrated that binding of a large molecule to cysteine 111 renders an inactive toxin that is no longer able to bind to the membrane. These results validate the mutant StI W111C for its use in the construction of tumour proteinase-activated ITs.

Effects of sodium dodecyl sulfate on the conformation and hemolytic activity of St I and St II, two isotoxins purified from Stichodactyla helianthus.

The effect of sodium dodecyl sulfate (SDS) upon the conformation and hemolytic activity of St I and St II strongly depends on its concentration. At relatively low surfactant concentrations (ca. 0.5-5mM range) the surfactant leads to the formation of aggregates, as suggested by the turbidity observed even at relatively low (micromolar range) protein concentrations. In this surfactant range, the proteins show an increase in intrinsic fluorescence intensity and reduced quenching by acrylamide, with an almost total loss of its hemolytic activity. At higher surfactant concentrations the protein adducts disaggregates. This produces a decrease in fluorescence intensity, increase in quenching efficiency by acrylamide, loss of the native tertiary conformation (as reported by the near UV-CD spectra), and increase in alpha-helix content (as evidenced by the far UV-CD spectra). However, and in spite of these substantial changes, the toxins partially recover their hemolytic activity. The reasons for this recovering of the activity at high surfactant concentrations is discussed.

The membranotropic activity of N-terminal peptides from the pore-forming proteins sticholysin I and II is modulated by hydrophobic and electrostatic interactions as well as lipid composition

The sea anemone Stichodactyla helianthus produces two pore-forming proteins, sticholysins I and II (St I and St II). Despite their high identity (93%), these toxins exhibit differences in hemolytic activity that can be related to those found in their N-terminal. To clarify the contribution of the N-terminal amino acid residues to the activity of the toxins, we synthesized peptides spanning residues 1–31 of St I (StI1-31) or 1–30 of St II (StII1-30) and demonstrated that StII1-30 promotes erythrocyte lysis to a higher extent than StI1-31. For a better understanding of the molecular mechanism underlying the peptide activity, here we studied their binding to lipid monolayers and pemeabilizing activity in liposomes. For this, we examined the effect on peptide membranotropic activity of including phospatidic acid and cholesterol in a lipid mixture of phosphatidylcholine and sphingomyelin. The results suggest the importance of continuity of the 1–10 hydrophobic sequence in StII1-30 for displaying higher binding and activity, in spite of both peptides’ abilities to form pores in giant unilamellar vesicles. Thus, the different peptide membranotropic action is explained in terms of the differences in hydrophobic and electrostatic peptide properties as well as the enhancing role of membrane inhomogeneities.

The Presence of Sterols Favors Sticholysin I-Membrane Association and Pore Formation Regardless of Their Ability to Form Laterally Segregated Domains

Sticholysin I (St I) is a pore-forming toxin (PFT) produced by the Caribbean Sea anemone Stichodactyla helianthus belonging to the actinoporin protein family, a unique class of eukaryotic PFT. As for actinoporins, it has been proposed that the presence of cholesterol (Chol) and the coexistence of lipid phases increase binding to the target membrane and pore-forming ability. However, little is known about the role of membrane structure and dynamics (phase state, fluidity, and the presence of lipid domains) on the activity of actinoporins or which regions of the membrane are the most favorable for protein insertion, oligomerization, and eventually pore formation. To gain insight into the role of membrane properties on the functional activity of St I, we studied its binding to monolayers and vesicles of phosphatidylcholine (PC), sphingomyelin (SM), and sterols inducing (ergosterol -Erg and cholesterol -Chol) or not (cholestenone - Cln) membrane phase segregation in liquid ordered (Lo) and liquid disordered (Ld) domains. This study revealed that St I binds and permeabilizes with higher efficiency sterol-containing membranes independently of their ability to form domains. We discuss the results in terms of the relevance of different membrane properties for the actinoporins mechanism of action, namely, molecular heterogeneity, specially potentiated in membranes with sterols inducers of phase separation (Chol or Erg) or Cln, a sterol noninducer of phase separation but with a high propensity to induce nonlamellar phase. The role of the Ld phase is pointed out as the most suitable platform for pore formation. In this regard, such regions in Chol-containing membranes seem to be the most favored due to its increased fluidity; this property promotes toxin insertion, diffusion, and oligomerization leading to pore formation.

Cys mutants in functional regions of Sticholysin I clarify the participation of these residues in pore formation.

Experimental evidence shows that the mechanism of pore formation by actinoporins is a multistep process, involving binding of the water-soluble monomer to the membrane and subsequent oligomerization on the membrane surface, leading to the formation of a functional pore. However, as for other eukaryotic pore-forming toxins, the molecular details of the mechanism of membrane insertion and oligomerization are not clear. In order to obtain further insight with regard to the structure-function relationship in sticholysins, we designed and produced three cysteine mutants of recombinant sticholysin I (rStI) in relevant functional regions for membrane interaction: StI E2C and StI F15C (in the N-terminal region) and StI R52C (in the membrane binding site). The conformational characterization derived from fluorescence and CD spectroscopic studies of StI E2C, StI F15C and StI R52C suggests that replacement of these residues by Cys in rStI did not noticeably change the conformation of the protein. The substitution by Cys of Arg⁵² in the phosphocholine-binding site, provoked noticeable changes in rStI permeabilizing activity; however, the substitutions in the N-terminal region (Glu², Phe¹⁵) did not modify the toxins permeabilizing ability. The presence of a dimerized population stabilized by a disulfide bond in the StI E2C mutant showed higher pore-forming activity than when the protein is in the monomeric state, suggesting that sticholysins pre-ensembled at the N-terminal region could facilitate pore formation.