Fabrice Andrieux

Oxidation-reduction reactions of simple hydroxamic acids and plutonium(IV) ions in nitric acid

Summary Simple hydroxamic acids such as formo- and aceto-hydroxamic acids have been proposed as suitable reagents for the separation of either Pu and/or Np from U in modified or single cycle Purex based solvent extraction processes designed to meet the emerging requirements of advanced fuel cycles. The stability of these hydroxamic acids is dominated by their decomposition through acid hydrolysis. Kinetic studies of the acid hydrolysis of formo- and aceto-hydroxamic acids are reported in the absence and the presence of Pu(IV) ions. The slow reduction of these plutonium(IV) hydroxamate complexes to Pu(III) aquo-ions has been characterised by spectrophotometry and cyclic voltammetry. The reductions of Pu(IV) in the presence of FHA and AHA are consistent with a mechanism in which free hydroxamic acid in solution is hydrolysed whilst Pu(IV) ions remain fully complexed to hydroxamate ligands; then at some point close to a 1 : 1 Pu(IV) : XHA ratio, some free Pu4+ is released from the complex and reduction is initiated. Electrochemical and kinetic data suggest that the reductant is the hydroxamic acid rather than the hydroxylamine.

Fabrication and Characterisation of the Graphene Ring Micro Electrode (GRiME) with an Integrated, Concentric Ag/AgCl Reference Electrode

We report the fabrication and characterisation of the first graphene ring micro electrodes with the addition of a miniature concentric Ag/AgCl reference electrode. The graphene ring electrode is formed by dip coating fibre optics with graphene produced by a modified Hummers method. The reference electrode is formed using an established photocatalytically initiated electroless deposition (PIED) plating method. The performance of the so-formed graphene ring micro electrodes (GRiMEs) and associated reference electrode is studied using the probe redox system ferricyanide and electrode thicknesses assessed using established electrochemical methods. Using 220 μm diameter fibre optics, a ∼15 nm thick graphene ring electrode is obtained corresponding to an inner to outer radius ratio of >0.999, so allowing for use of extant analytical descriptions of very thin ring microelectrodes in data analysis. GRiMEs are highly reliable (current response invariant over >3,000 scans), with the concentric reference electrode showing comparable stability (current response invariant over >300 scans). Furthermore the micro-ring design allows for efficient use of electrochemically active graphene edge sites and the associated nA scale currents obtained neatly obviate issues relating to the high resistivity of undoped graphene. Thus, the use of graphene in ring microelectrodes improves the reliability of existing micro-electrode designs and expands the range of use of graphene-based electrochemical devices.

A preliminary study of the hydrolysis of hydroxamic acid complexants in the presence of oxidising metal ions

Simple hydroxamic acids (XHAs) are salt free, organic compounds with affinities for cations such as Np4+, Pu4+ and Fe3+. As such they have been identified as suitable reagents for the separation of either Pu and/or Np from U in modified or single cycle Purex based solvent extraction processes designed to meet the emerging requirements of Advanced Fuel Cycles. Acid catalyzed hydrolysis of free XHAs is well known and may impact negatively on reprocessing applications. The hydrolysis of metal-bound XHAs within metal ion-XHA complexes is less understood. Using a model derived for the study of hydroxamic acid hydrolysis in the presence of non-oxidising metal ions (Np (IV) and Fe(III)), we review data pertaining to the hydrolysis of hydroxamic acids in the presence of the oxidising Pu4+ ion, under conditions where the influence of the redox processes may potentially be neglected.