Fangmao Ye

Ratiometric Temperature Sensing with Semiconducting Polymer Dots

This communication describes ultrabright single-nanoparticle ratiometric temperature sensors based on semiconducting polymer dots (Pdots). We attached the temperature sensitive dye-Rhodamine B (RhB), whose emission intensity decreases with increasing temperature-within the matrix of Pdots. The as-prepared Pdot-RhB nanoparticle showed excellent temperature sensitivity and high brightness because it took advantage of the light harvesting and amplified energy transfer capability of Pdots. More importantly, the Pdot-RhB nanoparticle showed ratiometric temperature sensing under a single wavelength excitation and has a linear temperature sensing range that matches well with the physiologically relevant temperatures. We employed Pdot-RhB for measuring intracellular temperatures in a live-cell imaging mode. The exceptional brightness of Pdot-RhB allows this nanoscale temperature sensor to be used also as a fluorescent probe for cellular imaging.

Near-Infrared Fluorescent Dye-Doped Semiconducting Polymer Dots

Near-infrared (NIR) fluorescence sensing is desirable for in vivo biological measurements, but the method is currently limited by the availability of NIR fluorescent markers as well as by their poor performance, such as self-aggregation and dim fluorescence, in a physiological environment. To address this issue, this paper describes a NIR fluorescent polymer dot (Pdot) that emits at 777 nm. This Pdot was comparable in size to a water-soluble NIR quantum dot that emits at 800 nm (ITK Qdot800) but was about four times brighter and with a narrower emission peak. We formed the NIR Pdot by doping the NIR dye, silicon 2,3-naphthalocyanine bis(trihexylsilyloxide) (NIR775), into the matrix of poly (9,9-dioctylfluorene-co-benzothiadiazole) (PFBT) as the Pdot formed using a nanoscale precipitation technique. Free molecules of NIR775 aggregate in aqueous solution, but encapsulating them into the hydrophobic Pdot matrix effectively introduced them into aqueous solution for use in biological studies. Most importantly, the brightness of NIR775 was dramatically enhanced because of the excellent light-harvesting ability of PFBT and the very efficient energy transfer from PFBT to NIR775. We anticipate this bright NIR Pdot will be useful in biological measurements and cellular imaging where strong NIR emission is beneficial.

Multicolor Fluorescent Semiconducting Polymer Dots with Narrow Emissions and High Brightness

Fluorescent semiconducting polymer dots (Pdots) have attracted great interest because of their superior characteristics as fluorescent probes, such as high fluorescence brightness, fast radiative rates, and excellent photostability. However, currently available Pdots generally exhibit broad emission spectra, which significantly limit their usefulness in many biological applications involving multiplex detections. Here, we describe the design and development of multicolor narrow emissive Pdots based on different boron dipyrromethene (BODIPY) units. BODIPY-containing semiconducting polymers emitting at multiple wavelengths were synthesized and used as precursors for preparing the Pdots, where intraparticle energy transfer led to highly bright, narrow emissions. The emission full width at half-maximum of the resulting Pdots varies from 40 to 55 nm, which is 1.5-2 times narrower than those of conventional semiconducting polymer dots. BODIPY 520 Pdots were about an order of magnitude brighter than commercial Qdot 525 under identical laser excitation conditions. Fluorescence imaging and flow cytometry experiments indicate that the narrow emissions from these bright Pdots are promising for multiplexed biological detections.

Hybrid Semiconducting Polymer Dot–Quantum Dot with Narrow-Band Emission, Near-Infrared Fluorescence, and High Brightness

This communication describes a new class of semiconducting polymer nanoparticle-quantum dot hybrid with high brightness, narrow emission, near-IR fluorescence, and excellent cellular targeting capability. Using this approach, we circumvented the current difficulty with obtaining narrow-band-emitting and near-IR-fluorescing semiconducting polymer nanoparticles while combining the advantages of both semiconducting polymer nanoparticles and quantum dots. We further demonstrated the use of this new class of hybrid nanomaterial for effective and specific cellular and subcellular labeling without any noticeable nonspecific binding. This hybrid nanomaterial is anticipated to find use in a variety of in vitro and in vivo biological applications.

A Compact and Highly Fluorescent Orange-Emitting Polymer Dot for Specific Subcellular Imaging

We demonstrate a new compact CN-PPV dot, which emits in the orange wavelength range with high brightness. The small particle size, high brightness, and the ability to highly specifically target subcellular structures make the CN-PPV dots promising probes for biological imaging and bioanalytical applications.

Squaraine-Based Polymer Dots with Narrow, Bright Near-Infrared Fluorescence for Biological Applications

This article describes the design and development of squaraine-based semiconducting polymer dots (Pdots) that show large Stokes shifts and narrow-band emissions in the near-infrared (NIR) region. Fluorescent copolymers containing fluorene and squaraine units were synthesized and used as precursors for preparing the Pdots, where exciton diffusion and likely through-bond energy transfer led to highly bright and narrow-band NIR emissions. The resulting Pdots exhibit the emission full width at half-maximum of ∼36 nm, which is ∼2 times narrower than those of inorganic quantum dots in the same wavelength region (∼66 nm for Qdot705). The squaraine-based Pdots show a high fluorescence quantum yield (QY) of 0.30 and a large Stokes shift of ∼340 nm. Single-particle analysis indicates that the average per-particle brightness of the Pdots is ∼6 times higher than that of Qdot705. We demonstrate bioconjugation of the squaraine Pdots and employ the Pdot bioconjugates in flow cytometry and cellular imaging applications. Our results suggest that the narrow bandwidth, high QY, and large Stokes shift are promising for multiplexed biological detections.

Importance of having low-density functional groups for generating high-performance semiconducting polymer dots.

Semiconducting polymers with low-density side-chain carboxylic acid groups were synthesized to form stable, functionalized, and highly fluorescent polymer dots (Pdots). The influence of the molar fraction of hydrophilic side-chains on Pdot properties and performance was systematically investigated. Our results show that the density of side-chain carboxylic acid groups significantly affects Pdot stability, internal structure, fluorescence brightness, and nonspecific binding in cellular labeling. Fluorescence spectroscopy, single-particle imaging, and a dye-doping method were employed to investigate the fluorescence brightness and the internal structure of the Pdots. The results of these experiments indicate that semiconducting polymers with low density of side-chain functional groups can form stable, compact, and highly bright Pdots as compared to those with high density of hydrophilic side-chains. The functionalized polymer dots were conjugated to streptavidin (SA) by carbodiimide-catalyzed coupling and the Pdot-SA probes effectively and specifically labeled the cancer cell-surface marker Her2 in human breast cancer cells. The carboxylate-functionalized polymer could also be covalently modified with small functional molecules to generate Pdot probes for click chemistry-based bio-orthogonal labeling. This study presents a promising approach for further developing functional Pdot probes for biological applications.

Stable Functionalization of Small Semiconducting Polymer Dots via Covalent Cross‐Linking and Their Application for Specific Cellular Imaging

A facile cross-linking strategy covalently links functional molecules to semiconducting polymer dots (Pdots) while simultaneously providing functional groups for biomolecular conjugation. In addition to greatly enhanced stability, the formed Pdots are small (<10 nm), which can be difficult to achieve with current methods but is highly desirable for most biological applications. These characteristics are significant for improving labeling efficiency and sensitivity in cellular assays that employ Pdots.

Generation of functionalized and robust semiconducting polymer dots with polyelectrolytes

We describe a facile method to functionalize semiconducting polymer dots (Pdots) with polyelectrolytes. The polyelectrolyte coating dramatically improves the colloidal stability of the Pdots in solutions which are either of high ionic strength or contain bivalent metal ions: this feature allows Pdots to be used under physiologically relevant environments without losing their functionality. We conjugated the polyelectrolyte-coated Pdots with streptavidin to demonstrate their application in specific cell labeling.

A versatile method for generating semiconducting polymer dot nanocomposites

This paper describes a method, based on co-precipitation, for generating small semiconducting polymer dot (Pdot) nanocomposites, which contain either gold or iron oxide nanoparticles within the Pdot matrix. We demonstrate the utility of Pdot-Au nanoparticles (Au-NP-Pdots) in dual-modality imaging in which co-localization of fluorescence from Pdot and scattering from Au was used to identify Au-NP-Pdot probes for downstream single-particle tracking and cellular imaging. We also demonstrate the potential of employing Pdot-FeO(x) nanoparticles (FeO(x)-NP-Pdots) for both sample preparation, where cells tagged with FeO(x)-NP-Pdots were isolated using an external magnet, and cellular imaging and detection, owing to the intense fluorescence from Pdots. The method we present here should be generalizable to the formation of other Pdot nanocomposites for creating the next generation of multi-functional Pdot probes.