Fatemeh Ajalloueian

Viability and proliferation of rat MSCs on adhesion protein-modified PET and PU scaffolds

In 2011, the first in-man successful transplantation of a tissue engineered trachea-bronchial graft, using a synthetic POSS-PCU nanocomposite construct seeded with autologous stem cells, was performed. To further improve this technology, we investigated the feasibility of using polymers with a three dimensional structure more closely mimicking the morphology and size scale of native extracellular matrix (ECM) fibers. We therefore investigated the in vitro biocompatibility of electrospun polyethylene terephthalate (PET) and polyurethane (PU) scaffolds, and determined the effects on cell attachment by conditioning the fibers with adhesion proteins. Rat mesenchymal stromal cells (MSCs) were seeded on either PET or PU fiber-layered culture plates coated with laminin, collagen I, fibronectin, poly-D-lysine or gelatin. Cell density, proliferation, viability, morphology and mRNA expression were evaluated. MSC cultures on PET and PU resulted in similar cell densities and amounts of proliferating cells, with retained MSC phenotype compared to data obtained from tissue culture plate cultures. Coating the scaffolds with adhesion proteins did not increase cell density or cell proliferation. Our data suggest that both PET and PU mats, matching the dimensions of ECM fibers, are biomimetic scaffolds and, because of their high surface area-to-volume provided by the electrospinning procedure, makes them per se suitable for cell attachment and proliferation without any additional coating.

Biomechanical and biocompatibility characteristics of electrospun polymeric tracheal scaffolds.

The development of tracheal scaffolds fabricated based on electrospinning technique by applying different ratios of polyethylene terephthalate (PET) and polyurethane (PU) is introduced here. Prior to clinical implantation, evaluations of biomechanical and morphological properties, as well as biocompatibility and cell adhesion verifications are required and extensively performed on each scaffold type. However, the need for bioreactors and large cell numbers may delay the verification process during the early assessment phase. Hence, we investigated the feasibility of performing biocompatibility verification using static instead of dynamic culture. We performed bioreactor seeding on 3-dimensional (3-D) tracheal scaffolds (PET/PU and PET) and correlated the quantitative and qualitative results with 2-dimensional (2-D) sheets seeded under static conditions. We found that an 8-fold reduction for 2-D static seeding density can essentially provide validation on the qualitative and quantitative evaluations for 3-D scaffolds. In vitro studies revealed that there was notably better cell attachment on PET sheets/scaffolds than with the polyblend. However, the in vivo outcomes of cell seeded PET/PU and PET scaffolds in an orthotopic transplantation model in rodents were similar. They showed that both the scaffold types satisfied biocompatibility requirements and integrated well with the adjacent tissue without any observation of necrosis within 30 days of implantation.

Are synthetic scaffolds suitable for the development of clinical tissue‐engineered tubular organs?

Transplantation of tissues and organs is currently the only available treatment for patients with end-stage diseases. However, its feasibility is limited by the chronic shortage of suitable donors, the need for life-long immunosuppression, and by socioeconomical and religious concerns. Recently, tissue engineering has garnered interest as a means to generate cell-seeded three-dimensional scaffolds that could replace diseased organs without requiring immunosuppression. Using a regenerative approach, scaffolds made by synthetic, nonimmunogenic, and biocompatible materials have been developed and successfully clinically implanted. This strategy, based on a viable and ready-to-use bioengineered scaffold, able to promote novel tissue formation, favoring cell adhesion and proliferation, could become a reliable alternative to allotransplatation in the next future. In this article, tissue-engineered synthetic substitutes for tubular organs (such as trachea, esophagus, bile ducts, and bowel) are reviewed, including a discussion on their morphological and functional properties.

Preservation of aortic root architecture and properties using a detergent-enzymatic perfusion protocol.

Aortic valve degeneration and dysfunction is one of the leading causes for morbidity and mortality. The conventional heart-valve prostheses have significant limitations with either life-long anticoagulation therapeutic associated bleeding complications (mechanical valves) or limited durability (biological valves). Tissue engineered valve replacement recently showed encouraging results, but the unpredictable outcome of tissue degeneration is likely associated to the extensive tissue processing methods. We believe that optimized decellularization procedures may provide aortic valve/root grafts improved durability. We present an improved/innovative decellularization approach using a detergent-enzymatic perfusion method, which is both quicker and has less exposure of matrix degenerating detergents, compared to previous protocols. The obtained graft was characterized for its architecture, extracellular matrix proteins, mechanical and immunological properties. We further analyzed the engineered aortic root for biocompatibility by cell adhesion and viability in vitro and heterotopic implantation in vivo. The developed decellularization protocol was substantially reduced in processing time whilst maintaining tissue integrity. Furthermore, the decellularized aortic root remained bioactive without eliciting any adverse immunological reaction. Cell adhesion and viability demonstrated the scaffolds biocompatibility. Our optimized decellularization protocol may be useful to develop the next generation of clinical valve prosthesis with a focus on improved mechanical properties and durability.

The development of the bioartificial lung

INTRODUCTION OR BACKGROUND The incidence of chronic lung disease is increasing worldwide due to the spread of risk factors and ageing population. An important advance in treatment would be the development of a bioartificial lung where the blood-gas exchange surface is manufactured from a synthetic or natural scaffold material that is seeded with the appropriate stem or progenitor cells to mimic the functional tissue of the natural lung. SOURCES OF DATA Articles relating to bioartificial lungs were sourced through PubMed and ISI Web of Knowledge. AREAS OF AGREEMENT There is a consensus that advances in bioartificial lung engineering will be beneficial to patients with chronic lung failure. Ultimate success will require the concerted efforts of researchers drawn from a broad range of disciplines, including clinicians, cell biologists, materials scientists and engineers. AREAS OF CONTROVERSY As a source of cells for use in bioartificial lungs it is proposed to use human embryonic stem cells; however, there are ethical and safety concerns regarding the use of these cells. GROWING POINTS There is a need to identify the optimum strategies for differentiating progenitor cells into functional lung cells; a need to better understand cell-biomaterial/ECM interactions and a need to understand how to harness the bodys natural capacity to regenerate the lung. AREAS TIMELY FOR DEVELOPING RESEARCH Biomaterial technologies for recreating the natural lung ECM and architecture need further development. Mathematical modelling techniques should be developed for determining optimal scaffold seeding strategies and predicting gas exchange performance.

Compressed collagen constructs with optimized mechanical properties and cell interactions for tissue engineering applications

In this study, we are introducing a simple, fast and reliable add-in to the technique of plastic compression to obtain collagen sheets with decreased fibrillar densities, representing improved cell-interactions and mechanical properties. Collagen hydrogels with different initial concentrations (1.64mg/mL-0.41mg/mL) were compressed around an electrospun sheet of PLGA. The scaffolds were then studied as non-seeded, or seeded with 3T3 fibroblast cells and cultured for 7days. Confocal microscopy and TEM imaging of non-seeded scaffolds showed that by decreasing the share of collagen in the hydrogel formula, collagen sheets with similar thickness but lower fibrous densities were achieved. Nanomechanical characterization of compressed collagen sheets by AFM showed that Youngs modulus was inversely proportional to the final concentration of collagen. Similarly, according to SEM, MTS, and cell nuclei counting, all the scaffolds supported cell adhesion and proliferation, whilst the highest metabolic activities and proliferation were seen in the scaffolds with lowest collagen content in hydrogel formula. We conclude that by decreasing the collagen content in the formula of collagen hydrogel for plastic compression, not only a better cell environment and optimum mechanical properties are achieved, but also the application costs of this biopolymer is reduced.

Modelling biological cell attachment and growth on adherent surfaces

A mathematical model, in the form of an integro-partial differential equation, is presented to describe the dynamics of cells being deposited, attaching and growing in the form of a monolayer across an adherent surface. The model takes into account that the cells suspended in the media used for the seeding have a distribution of sizes, and that the attachment of cells restricts further deposition by fragmenting the parts of the domain unoccupied by cells. Once attached the cells are assumed to be able to grow and proliferate over the domain by a process of infilling of the interstitial gaps; it is shown that without cell proliferation there is a slow build up of the monolayer but if the surface is conducive to cell spreading and proliferation then complete coverage of the domain by the monolayer can be achieved more rapidly. Analytical solutions of the model equations are obtained for special cases, and numerical solutions are presented for parameter values derived from experiments of rat mesenchymal stromal cells seeded onto thin layers of collagen-coated polyethylene terephthalate electrospun fibers. The model represents a new approach to describing the deposition, attachment and growth of cells over adherent surfaces, and should prove useful for studying the dynamics of the seeding of biomaterials.

Fabrication, characterization, and biocompatibility assessment of a novel elastomeric nanofibrous scaffold: A potential scaffold for soft tissue engineering: Fabrication of elastomeric nanofibrous scaffold

With regard to flexibility and strength properties requirements of soft biological tissue, elastomeric materials could be more beneficial in soft tissue engineering applications. The present work investigates the use of an elastic polymer, (polycaprolactone fumarate [PCLF]), for fabricating an electrospun scaffold. PCLF with number-average molecular weight of 13,284 g/mol was synthetized, electrospun PCLF:polycaprolactone (PCL) (70:30) nanofibrous scaffolds were fabricated and a novel strategy (in situ photo-crosslinking along with wet electrospinning) was applied for crosslinking of PCLF in the structure of PCLF:PCL nanofibers was presented. Sol fraction results, Fourier-transform infrared spectroscopy, and mechanical tests confirmed occurrence of crosslinking reaction. Strain at break and Youngs modulus of crosslinked PCLF:PCL nanofibers fabricated was found to be 114.5 ± 3.9% and 0.6 ± 0.1 MPa, respectively, and dynamic mechanical analysis results revealed elasticity of nanofibers. MTS assay showed biocompatibility of PCLF:PCL (70:30) nanofibrous scaffolds. Our overall results showed that electrospun PCLF:PCL nanofibrous scaffold could be considered as a candidate for further in vitro and in vivo experiments and its application for engineering of soft tissues subjected to in vivo cyclic mechanical stresses.

Bladder biomechanics and the use of scaffolds for regenerative medicine in the urinary bladder

The urinary bladder is a complex organ with the primary functions of storing urine under low and stable pressure and micturition. Many clinical conditions can cause poor bladder compliance, reduced capacity, and incontinence, requiring bladder augmentation or use of regenerative techniques and scaffolds. To replicate an organ that is under frequent mechanical loading and unloading, special attention towards fulfilling its biomechanical requirements is necessary. Several biological and synthetic scaffolds are available, with various characteristics that qualify them for use in bladder regeneration in vitro and in vivo, including in the treatment of clinical conditions. The biomechanical properties of the native bladder can be investigated using a range of mechanical tests for standardized assessments, as well as mathematical and computational bladder biomechanics. Despite a large body of research into tissue engineering of the bladder wall, some features of the native bladder and the scaffolds used to mimic it need further elucidation. Collection of comparable reference data from different animal models would be a helpful tool for researchers and will enable comparison of different scaffolds in order to optimize characteristics before entering preclinical and clinical trials.

Bladder wall biomechanics: A comprehensive study on fresh porcine urinary bladder

Regenerative medicine for reconstructive urogenital surgery has been widely studied during the last two decades. One of the key factors affecting the quality of bladder regeneration is the mechanical properties of the bladder scaffold. Insight into the biomechanics of this organ is expected to assist researchers with functional regeneration of the bladder wall. Due to extensive similarities between human bladder and porcine bladder, and with regard to lack of comprehensive biomechanical data from the porcine bladder wall (BW), our main goal here was to provide a thorough evaluation on viscoelastic properties of fresh porcine urinary BW. Three testing modes including Uniaxial tensile, ball-burst (BB) and Dynamic Mechanical Analysis (DMA) were applied in parallel. Uniaxial tests were applied to study how different circumferential and longitudinal cut-outs of lateral region of BW behave under load. DMA was used to measure the viscoelastic properties of the bladder tissue (storage and loss modulus) in a frequency range of 0.1-3Hz. BB was selected as a different technique, replicating normal physiological conditions where the BW is studied in whole. According to uniaxial tests, the anisotropic behavior of bladder is evident at strain loads higher than 200%. According to DMA, storage modulus is consistently higher than loss modulus in both directions, revealing the elasticity of the BW. The stress-strain curves of both uniaxial and BB tests showed similar trends. However, the ultimate stress measured from BB was found to be around 5 times of the relevant stress from uniaxial loading. The ultimate strain in BB (389.9 ± 59.8) was interestingly an approximate average of rupture strains in longitudinal (358 ± 21) and circumferential (435 ± 69) directions. Considering that each testing mode applied here reveals distinct information, outcomes from the combination of the three can be considered as a helpful data-base to refer to for researchers aiming to regenerate the bladder.