Fengqiu Wang

Graphene mode-locked ultrafast laser.

Graphene is at the center of a significant research effort. Near-ballistic transport at room temperature and high mobility make it a potential material for nanoelectronics. Its electronic and mechanical properties are also ideal for micro- and nanomechanical systems, thin-film transistors, and transparent and conductive composites and electrodes. Here we exploit the optoelectronic properties of graphene to realize an ultrafast laser. A graphene-polymer composite is fabricated using wet-chemistry techniques. Pauli blocking following intense illumination results in saturable absorption, independent of wavelength. This is used to passively mode-lock an erbium-doped fiber laser working at 1559 nm, with a 5.24 nm spectral bandwidth and approximately 460 fs pulse duration, paving the way to graphene-based photonics.

Sub 200 fs pulse generation from a graphene mode-locked fiber laser

Ultrafast fiber lasers with broad bandwidth are in great demand for a variety of applications, such as spectroscopy, biomedical diagnosis, and optical communications. Sub 200 fs pulses are required for ultrafast spectroscopy with high temporal resolution. Graphene is an ideal ultrawide-band saturable absorber. We report the generation of 174 fs pulses from a graphene-based fiber laser.

Graphene Q-switched, tunable fiber laser

We demonstrate a wideband-tunable Q-switched fiber laser exploiting a graphene saturable absorber. We get ∼2 μs pulses, tunable between 1522 and 1555 nm with up to ∼40 nJ energy. This is a simple and low-cost light source for metrology, environmental sensing, and biomedical diagnostics.

Versatile multi-wavelength ultrafast fiber laser mode-locked by carbon nanotubes

Multi-wavelength lasers have widespread applications (e.g. fiber telecommunications, pump-probe measurements, terahertz generation). Here, we report a nanotube-mode-locked all-fiber ultrafast oscillator emitting three wavelengths at the central wavelengths of about 1540, 1550, and 1560 nm, which are tunable by stretching fiber Bragg gratings. The output pulse duration is around 6 ps with a spectral width of ~0.5 nm, agreeing well with the numerical simulations. The triple-laser system is controlled precisely and insensitive to environmental perturbations with <0.04% amplitude fluctuation. Our method provides a simple, stable, low-cost, multi-wavelength ultrafast-pulsed source for spectroscopy, biomedical research and telecommunications.

Tm-doped fiber laser mode-locked by graphene-polymer composite

We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94 μm, using a graphene-polymer based saturable absorber. The laser outputs 3.6 ps pulses, with ~0.4 nJ energy and an amplitude fluctuation ~0.5%, at 6.46 MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics.

A compact, high power, ultrafast laser mode-locked by carbon nanotubes

We report ultrafast highly chirped pulses from an erbium doped, nanotube-mode-locked fiber oscillator. We generate 1.6W average power and 11kW peak power by seeding a fiber amplifier. This paves the way to mode-locked all-fiber master oscillator amplifiers as economic and compact sources for high-power applications, such as micromachining and laser surgery.

74-fs nanotube-mode-locked fiber laser

We report an erbium-doped, nanotube mode-locked fiber oscillator generating 74 fs pulses with 63 nm spectral width. This all-fiber-based laser is a simple, low-cost source for time-resolved optical spectroscopy, as well as for many applications where high resolution driven by short pulse durations is required.

L-band ultrafast fiber laser mode locked by carbon nanotubes

We fabricate a nanotube-polyvinyl alcohol saturable absorber with a broad absorption at 1.6 μm. We demonstrate a pulsed fiber laser working in the telecommunication L band by using this composite as a mode locker. This gives ∼498±16 fs pulses at 1601 nm with a 26.7 MHz repetition rate.

Planar carbon nanotube–graphene hybrid films for high-performance broadband photodetectors

Graphene has emerged as a promising material for photonic applications fuelled by its superior electronic and optical properties. However, the photoresponsivity is limited by the low absorption cross-section and ultrafast recombination rates of photoexcited carriers. Here we demonstrate a photoconductive gain of ∼105 electrons per photon in a carbon nanotube–graphene hybrid due to efficient photocarriers generation and transport within the nanostructure. A broadband photodetector (covering 400–1,550 nm) based on such hybrid films is fabricated with a high photoresponsivity of >100 A W−1 and a fast response time of ∼100 μs. The combination of ultra-broad bandwidth, high responsivities and fast operating speeds affords new opportunities for facile and scalable fabrication of all-carbon optoelectronic devices.

Flexible high-repetition-rate ultrafast fiber laser

High-repetition-rate pulses have widespread applications in the fields of fiber communications, frequency comb, and optical sensing. Here, we have demonstrated high-repetition-rate ultrashort pulses in an all-fiber laser by exploiting an intracavity Mach-Zehnder interferometer (MZI) as a comb filter. The repetition rate of the laser can be tuned flexibly from about 7 to 1100 GHz by controlling the optical path difference between the two arms of the MZI. The pulse duration can be reduced continuously from about 10.1 to 0.55 ps with the spectral width tunable from about 0.35 to 5.7 nm by manipulating the intracavity polarization controller. Numerical simulations well confirm the experimental observations and show that filter-driven four-wave mixing effect, induced by the MZI, is the main mechanism that governs the formation of the high-repetition-rate pulses. This all-fiber-based laser is a simple and low-cost source for various applications where high-repetition-rate pulses are necessary.