Fernando G. Dupuy

Ceramide N-acyl chain length: a determinant of bidimensional transitions, condensed domain morphology, and interfacial thickness.

Several lipids of biological interest are able to form monomolecular surfaces with a rich variety of thickness and lateral topography that can be precisely controlled by defined variations of the film composition. Ceramide is one of the simplest sphingolipids, consisting of a sphingosine base N-linked to a fatty acid, and is a membrane mediator for cell-signaling events. In this work, films of ceramides N-acylated with the saturated fatty acids C10, C12, C14, and C16 were studied at the air-aqueous interface. The dipole moment contribution (from surface potential measurements) and the surface topography and thickness (as revealed by Brewster angle microscopy) were measured simultaneously with the surface pressure at different molecular areas. Several surface features were observed depending on the asymmetry between the sphingosine and the N-linked acyl chains. At 21 °C, the C16:0 and C14:0 ceramides showed condensed isotherms and the film topography revealed solid film patches (17.3-15.7 Å thick) that coalesced into a homogeneous surface by further compression. On the other hand, in the more asymmetric C12:0 and C10:0 ceramides, liquid expanded states and liquid expanded-condensed transitions occurred. In the phase coexistence region, the condensed state of these compounds formed flowerlike domains (11.1-13.3 Å thick). C12:0 ceramide domains were larger and more densely branched than those of C10:0 ceramide. Both the film thickness and the surface dipole moment of the condensed state increased with ceramide N-acyl chain length. Bending of the sphingosine chain over the N-linked acyl chain in the more asymmetric ceramides can account for the variation of the surface electrostatics, topography, and thickness of the films with the acyl chain mismatch.

Microcin J25 induces the opening of the mitochondrial transition pore and cytochrome c release through superoxide generation

Microcin J25, an antimicrobial lasso‐structure peptide, induces the opening of mitochondrial permeability transition pores and the subsequent loss of cytochrome c. The microcin J25 effect is mediated by the stimulation of superoxide anion overproduction. An increased uptake of calcium is also involved in this process. Additional studies with superoxide dismutase, ascorbic acid and different specific inhibitors, such as ruthenium red, cyclosporin A and Mn2+, allowed us to establish a time sequence of events starting with the binding of microcin J25, followed by superoxide anion overproduction, opening of mitochondrial permeability transition pores, mitochondrial swelling and the concomitant leakage of cytochrome c.

Microcin J25 triggers cytochrome c release through irreversible damage of mitochondrial proteins and lipids

We previously showed that the antimicrobial peptide microcin J25 induced the over-production of reactive oxygen species with the concomitant release of cytochrome c from rat heart mitochondria via the opening of the mitochondrial permeability transition pore. Here, we were able to demonstrate that indeed, as a consequence of the oxidative burst, MccJ25 induces carbonylation of mitochondrial proteins, which may explain the irreversible inhibition of complex III and the partial inhibition of superoxide dismutase and catalase. Moreover, the peptide raised the levels of oxidized membrane lipids, which triggers the release of cytochrome c. From in silico analysis, we hypothesize that microcin would elicit these effects through interaction with heme c1 at mitochondrial complex III. On the other hand, under an excess of l-arginine, MccJ25 caused nitric oxide overproduction with no oxidative damage and a marked inhibition in oxygen consumption. Therefore, a beneficial anti-oxidative activity could be favored by the addition of l-arginine. Conversely, MccJ25 pro-oxidative-apoptotic effect can be unleashed in either an arginine-free medium or by suppressing the nitric oxide synthase activity.

N-Acyl Chain in Ceramide and Sphingomyelin Determines Their Mixing Behavior, Phase State, and Surface Topography in Langmuir Films.

Sphingolipids are membrane lipids composed by a long chain aminediol base, usually sphingosine, with a N-linked fatty acyl chain whose quality depends on the membrane type. The effect of length and unsaturation of the N-acyl chain on the mixing behavior of different sphingolipids has scarcely been studied, and in this work this issue is addressed employing Langmuir monolayers at the air-water interface, in order to assess the surface mixing in binary mixtures of different species of sphingomyelins and ceramides. The dependence on the monolayer composition of the mean molecular area, perpendicular dipole moment, domain segregation, and surface topography, as well as the film elasticity and optical thickness were studied. The results indicate that composition-dependent favorable interactions among sphingomyelin and ceramide occur as a consequence of complementary lateral packing and increased acyl chain ordering; the phase state of the components appears as a major factor determining miscibility among sphingomyelins and ceramides even in cases where the lipids have a considerable hydrocarbon chain length mismatch.

Cholesterol induces surface localization of polyphenols in model membranes thus enhancing vesicle stability against lysozyme, but reduces protection of distant double bonds from reactive-oxygen species

The main scope of the present study was to analyze the membrane interaction of members of different classes of polyphenols, i.e. resveratrol, naringenin, epigallocatechin gallate and enterodiol, in model systems of different compositions and phase states. In addition, the possible association between membrane affinity and membrane protection against both lipid oxidation and bilayer-disruptive compounds was studied. Gibbs monolayer experiments indicated that even though polyphenols showed poor surface activity, it readily interacted with lipid films. Actually, a preferential interaction with expanded monolayers was observed, while condensed and cholesterol-containing monolayers decreased the affinity of these phenolic compounds. On the other hand, fluorescence anisotropy studies showed that polyphenols were able to modulate membrane order degree, but again this effect was dependent on the cholesterol concentration and membrane phase state. In fact, cholesterol induced a surface rather than deep into the hydrophobic core localization of phenolic compounds in the membranes. In general, the polyphenolic molecules tested had a better antioxidant activity when they were allowed to get inserted into the bilayers, i.e. in cholesterol-free membranes. On the other hand, a membrane-protective effect against bilayer permeabilizing activity of lysozyme, particularly in the presence of cholesterol, could be assessed. It can be hypothesized that phenolic compounds may protect membrane integrity by loosely covering the surface of lipid vesicles, once cholesterol push them off from the membrane hydrophobic core. However, this cholesterol-driven distribution may lead to a reduced antioxidant activity of linoleic acid double bonds.

Microcin J25 membrane interaction: Selectivity toward gel phase

The interaction of the tryptophan-containing variant of microcin J25, MccJ25 I13W, with phosphatidylcholine membranes was studied by fluorescence spectroscopy techniques. The peptide was able to interact with dimiristoylphophatidylcholine and dipalmitoylphosphatidylcholine liposomes only when the membranes were in gel phase, as was demonstrated by the blue shift of the intrinsic fluorescence of MccJ25 I13W. The binding isotherm showed a cooperative partition of the peptide toward the membrane and the binding constant increased as the temperature decreased and the order parameter increased. No interaction with liquid crystalline membranes was observed. Studies of dynamic quenching of the fluorescence indicated that the peptide penetrated the lipid bilayer and was located primarily in the interfacial region. Our results suggest that MccJ25 I13W interacts with gel phase phospholipids and increases both its own affinity for the bilayer and the membrane permeability of small ions.

Microcin J25-Ga induces apoptosis in mammalian cells by inhibiting mitochondrial RNA-polymerase.

MccJ25, an antimicrobial peptide, was unable to cause apoptosis of COS-7 cells in spite of inducing reactive-oxygen species overproduction as well as cytochrome c release from isolated mitochondria. Surprisingly, MccJ25-Ga, an amidated variant of MccJ25 that displays similar anti-mitochondrial effects, did induce apoptosis in COS-7. The only difference found between the activities of these peptides was the unpredicted inhibition of mitochondrial RNA synthesis by MccJ25-Ga. These results led us to hypothesize that both mitochondrial RNA polymerase and mitochondrial membrane might be the molecular targets of MccJ25-Ga in mitochondria and this combined effect may lead to apoptosis.

Interfacial stabilization of the antitumoral drug Paclitaxel in monolayers of GM1 and GD1a gangliosides.

Molecular interactions between the anti-cancer agent Paclitaxel (Ptx), and two gangliosides with different sialic acid content, GM1 and GD1a, were investigated using the Langmuir film balance technique. Ptx showed interfacial activity reducing the air/water surface tension by 18 mN·m(-1). However, the drug was able to insert into preformed ganglioside monolayers at much higher surface pressures, indicating a preferential interaction of Ptx with GM1 and GD1a. Compression isotherms of binary mixtures of Ptx and GM1 or GD1a also indicated non-ideal mixed monolayers in which the drug became stabilized at the interface in the presence of gangliosides. Ptx reached much higher surface pressure values in the mixed monolayers than those sustained in pure Ptx, although partial desorption of the drug from the interface into the subphase was also observed at high Ptx contents. The mean molecular area of the mixtures showed condensation, mainly in the case of GD1a, whereas Ptx induced a decrease in the compressibility of monolayers when mixed with either GM1 or GD1a. Additionally, Brewster angle microscopy analysis indicated that higher amounts of Ptx are present at the mixed ganglioside/Ptx interface when compared to pure drug monolayers. Finally, GD1a micelles increased in size in the presence of Ptx, whereas GM1 micelles kept their diameter, according to dynamic light scattering measurements, which could be explained by the different properties of ganglioside monolayers. The results obtained on ganglioside-Ptx interactions allowed interpreting the different Ptx loading capacity of GM1 and GD1a, enabling them to act as potential drug carriers.

Impairment of the class IIa bacteriocin receptor function and membrane structural changes are associated to enterocin CRL35 high resistance in Listeria monocytogenes

BACKGROUND Enterocin CRL35 is a class IIa bacteriocin with anti-Listeria activity. Resistance to these peptides has been associated with either the downregulation of the receptor expression or changes in the membrane and cell walls. The scope of the present work was to characterize enterocin CRL35 resistant Listeria strains with MICs more than 10,000 times higher than the MIC of the WT sensitive strain. METHODS Listeria monocytogenes INS7 resistant isolates R2 and R3 were characterized by 16S RNA gene sequencing and rep-PCR. Bacterial growth kinetic was studied in different culture media. Plasma membranes of sensitive and resistant bacteria were characterized by FTIR and Langmuir monolayer techniques. RESULTS The growth kinetic of the resistant isolates was slower as compared to the parental strain in TSB medium. Moreover, the resistant isolates barely grew in a glucose-based synthetic medium, suggesting that these cells had a major alteration in glucose transport. Resistant bacteria also had alterations in their cell wall and, most importantly, membrane lipids. In fact, even though enterocin CRL35 was able to bind to the membrane-water interface of both resistant and parental sensitive strains, this peptide was only able to get inserted into the latter membranes. CONCLUSIONS These results indicate that bacteriocin receptor is altered in combination with membrane structural modifications in enterocin CRL35-resistant L. monocytogenes strains. GENERAL SIGNIFICANCE Highly enterocin CRL35-resistant isolates derived from Listeria monocytogenes INS7 have not only an impaired glucose transport but also display structural changes in the hydrophobic core of their plasma membranes.

The antimicrobial peptide microcin J25 stabilizes the gel phase of bacterial model membranes

The bacterial membrane interaction of the antimicrobial peptide microcin J25 was studied with the probe-free techniques Langmuir monolayers and infrared spectroscopy. Membrane model systems composed by phosphatidylethanolamine:phosphatidylglycerol 7:3, which mimic the cytoplasmic membrane of Gram negative bacteria, were used in both monolayer and bilayer approaches. The peptide reduced the transition surface pressure of the expanded-to-condensed lipid monolayer states, as well as increased the gel-to-liquid crystalline transition temperature in bilayers, indicating a stabilization of membrane ordered state. In addition, a reduction of the surface pressure at which condensed domains appeared was observed upon mixed monolayers compression after microcin J25 adsorption. The results indicate a favorable interaction of microcin J25 with bacterial membrane model systems. Also, the effects on the ordered phases stabilization are discussed in terms of the biological effects observed in membranes of sensitive cells.