Fernando Rocha

Clay minerals from the sedimentary cover from the Northwest Iberian shelf

Abstract The Northern Iberian margin is a typical example of a continental margin subjected to seasonal highly energetic regime (waves and tides) and receiving inputs of continental sediments via riverine discharges. The principal goal of this study has been to use clay minerals as indicators of sedimentary dynamics in the open shelf system. The distributions of clay mineral in the top layer of the sedimentary cover are shown to be related to their continental sources, but also reflect the influences of winter storms and longshore currents in determining the pathways of sediment transport. The mineralogical composition of the material issuing from the rivers is very similar to the general mineralogical composition of the fine fractions of the seabed sediments. Those deposits that are directly influenced by riverine discharges have higher contents of kaolinite (>20%), whereas those that are not have higher contents of illite (>80%). The available data indicate no significant quantities of terrigenous particles are being discharged from the Spanish rias. Therefore, we conclude that physical processes are controlling the clay mineral distributions and that, despite contributions from the Minho River, the main source of fine detrital particles to the shelf region is the Douro River discharge. These particles settle on the middle shelf, below the 60 m isobath. During storm events these particles are re-suspended and advected northwards to the Galician shelf or into deeper domains. Thus the distributions of the clays indicate there is a net transport of fine sediments both northwards and off-shelf.

Lead removal from aqueous solutions by a Tunisian smectitic clay.

The adsorption of Pb(2+) ions onto Tunisian smectite-rich clay in aqueous solution was studied in a batch system. Four samples of clay (AYD, AYDh, AYDs, AYDc) were used. The raw AYD clay was sampled in the Coniacian-Early Campanian of Jebel Aïdoudi in El Hamma area (South of Tunisia). AYDh and AYDs corresponds to AYD activated by 2.5 mol/l hydrochloric acid and 2.5 mol/l sulphuric acid, respectively. AYDc corresponds to AYD calcined at different temperatures (100, 200, 300, 400, 500 and 600 degrees C). The raw AYD clay was characterized by X-ray diffraction, chemical analysis, infrared spectroscopy and coupled DTA-TGA. Specific surface area of all the clay samples was determined from nitrogen adsorption isotherms. Preliminary adsorption tests showed that sulphuric acid and hydrochloric acid activation of raw AYD clay enhanced its adsorption capacity for Pb(2+) ions. However, the uptake of Pb(2+) by AYDs was very high compared to that by AYDh. This fact was attributed to the greater solubility of clay minerals in sulphuric acid compared to hydrochloric acid. Thermic activation of AYD clay reduced the Pb(2+) uptake as soon as calcination temperature reaches 200 degrees C. All these preliminary results were well correlated to the variation of the specific surface area of the clay samples. The ability of AYDs sample to remove Pb(2+) from aqueous solutions has been studied at different operating conditions: contact time, adsorbent amount, metal ion concentration and pH. Kinetic experiments showed that the sorption of lead ions on AYDs was very fast and the equilibrium was practically reached after only 20 min. The results revealed also that the adsorption of lead increases with an increase in the solution pH from 1 to 4.5 and then decreases, slightly between pH 4.5 and 6, and rapidly at pH 6.5 due to the precipitation of some Pb(2+) ions. The equilibrium data were analysed using Langmuir isotherm model. The maximum adsorption capacity (Q(0)) increased from 25 to 25.44 mg/g with increasing temperature from 25 to 40 degrees C. Comparative study between sulphuric acid activated clay (AYDs) and powder activated carbon (PAC) for the adsorption of lead was also conducted. The results showed that sulphuric acid activated clay is more efficient than PAC.

Assessment of the health quality of Ria de Aveiro (Portugal): Heavy metals and benthic foraminifera

This work analyses the distribution of heavy metals in the sediments of Ria de Aveiro (Portugal) assessed by total digestion and sequential chemical extraction of the sediments. The influence of environmental parameters on the living benthic foraminiferal assemblages was studied. The most polluted parts in the Ria de Aveiro are areas where the residence time is high and cohesive sediments are deposited. Organic matter, which is an excellent scavenger for a number of metals, is in general more abundant in the finer deposits of this lagoon, which act as sinks of anthropogenic pollutants. This condition is observed in Aveiro canals and Murtosa channel where sediments with the highest concentrations of Zn, Pb, Cu, and Cr are found. The sediments of Murtosa channel are also enriched in As, Co and Hg. In Aveiro canals the enrichment of heavy metals is mostly related to the past industrial production at their margins (ceramic and metallurgy), whereas in Murtosa channel with effluent discharges of the Chemical Complex of Estarreja. Foraminiferal density and diversity reach higher values near the lagoon mouth under higher marine influence and decline in general under very low-oxygen conditions. Some species seems to be indifferent to the increasing of TOC (e.g. Haynesina germanica and Ammonia tepida) and some have an opportunistic behaviour in areas with very depressed levels of oxygen (e.g. A. tepida and Quinqueloculina seminulum) whereas other species can better tolerate sulphide/reducing conditions (e.g. H. germanica, Bolivina ordinaria, Buliminella elegantissima, Bulimina elongata/gibba and Nonionella stella) a widespread condition in this lagoon. Foraminiferal density and some species are negatively correlated with concentrations of heavy metals. A most sensitive group of species to higher concentrations of heavy metals is identified (such as B. ordinaria, B. pseudoplicata and B. elongata/gibba) and another one of more tolerant species (such as H. germanica A. tepida and Q. seminulum). Foraminifera are more tolerate higher available concentrations (AC) of Zn in any phase than higher AC of Cu adsorbed do clay minerals (F1) and associated with Fe and Mn oxides (F2) and of Pb in F2; the phase F2, probably the most mobile phase, and even phase F1 seems to be more toxic than the increasing of metals in organic matter (F3).

FIRING TESTS ON CLAY-RICH RAW MATERIALS FROM THE ALGARVE BASIN (SOUTHERN PORTUGAL): STUDY OF MINERAL TRANSFORMATIONS WITH TEMPERATURE

In cases where the provenance of raw materials used in the manufacture of local archeological ceramics is of interest, a detailed study of thermal transformations of minerals may be useful. The purpose of this study was to measure mineralogical transformations of different types of clays obtained during experimental firing runs, carried out at different temperatures, with the main goal of establishing Algarve reference groups based on the composition of raw material and high-temperature mineralogy, which may be compared with ceramics in studies of provenance. Eleven samples of clay-rich raw materials from the Algarve Basin (southern Portugal) were fired to temperatures ranging from 300 to 1100°C in increments of 100°C under oxidizing conditions. These were chosen to have variable chemical and mineralogical compositions, representing the main compositional range of the clay deposits from the region. Mineralogical and geochemical characterizations of the original clays were carried out by X-ray diffraction (XRD) and X-ray fluorescence (XRF), respectively. Mineral transformations on the fired products were also studied by XRD.Three groups of clays were distinguished according to the type of neoformed high-temperature minerals: (1) non-calcareous clays; (2) clays containing calcite as the only carbonate; and (3) clays with dolomite or dolomite + calcite. Firing of non-calcareous clays produced mullite at 1100–1200°C. Gehlenite and wollastonite formed by firing calcite-rich clays above 900°C, accompanied by anorthite or larnite in samples with small or large calcite contents, respectively. Firing of dolomite-rich clays at temperatures >900°C yielded a member of the gehlenite-åkermanite group and diopside. Anorthite, enstatite, periclase, forsterite, and monticellite may also form in the firing products.

Environmental Quality Assessment of Bizerte Lagoon (Tunisia) Using Living Foraminifera Assemblages and a Multiproxy Approach

This study investigated the environmental quality of the Bizerte Lagoon (Tunisia) through an integrated approach that combined environmental, biogeochemical, and living benthic foraminiferal analyses. Specifically, we analyzed the physicochemical parameters of the water and sediment. The textural, mineralogical, and geochemical characteristics of the sediment, including total organic carbon, total nitrogen, simultaneously extracted metals (SEM), acid volatile sulfides (AVS), chlorophyll a, CaCO3, and changes in bacterial populations and carbon isotopes were measured. The SEM/AVS values indicated the presence of relatively high concentrations of toxic metals in only some areas. Foraminiferal assemblages were dominated by species such as A. parkinsoniana (20–91%), Bolivina striatula (<40%), Hopkinsina atlantica (<17%), and Bolivina ordinaria (<15%) that cannot be considered typical of impacted coastal lagoons both in Mediterranean and northeast Atlantic regions. The results of this work suggest that Bizerte Lagoon is a unique setting. This lagoon is populated by typical marine species that invaded this ecosystem, attracted not only by the prevailing favorable environmental conditions but also by the abundance and quality of food. The results indicate that the metal pollution found in some areas have a negative impact on the assemblages of foraminifera. At present, however, this negative impact is not highly alarming.

Geochemistry, mineralogy, solid-phase fractionation and oral bioaccessibility of lead in urban soils of Lisbon

AbstractAn urban survey of Lisbon, the largest city in Portugal, was carried out to investigate its environmental burden, emphasizing metallic elements and their public health impacts. This paper examines the geochemistry of lead (Pb) and its influence on human health data. A total of 51 soil samples were collected from urban recreational areas used by children to play outdoors. The semi-quantitative analysis of Pb was carried out by inductively coupled plasma mass spectrometry after an acid digestion. X-ray diffraction was used to characterize the soil mineralogy. The solid-phase distribution of Pb in the urban soils was investigated on a subset of 7 soils, out of a total of 51 samples, using a non-specific sequential extraction method coupled with chemometric analysis. Oral bioaccessibility measurements were obtained using the Unified BARGE Method developed by the Bioaccessibility Research Group of Europe. The objectives of the study are as follows: (1) investigation of Pb solid-phase distribution; (2) interpretation of Pb oral bioaccessibility measurements; (3) integration of metal geochemistry with human health data; and (4) understanding the influence of geochemistry and mineralogy on oral bioaccessibility. The results show that the bioaccessible fraction of Pb is lower when major metal fractions are associated with less soluble soil phases such as Fe oxyhydroxides, and more increased when the metal is in the highly soluble carbonate phase. However, there is some evidence that the proportion of carbonates in the soil environment is also a key control over the oral bioaccessibility of Pb, irrespective of its solid-phase fractionation.

Foraminiferal biotopes and their distribution control in Ria de Aveiro (Portugal): a multiproxy approach

Ria de Aveiro, which is located in the centre of Portugal (40° 38′ N, 8° 45′ W), is a well-mixed and complex coastal lagoon that is separated from the sea by a sandy barrier and connects with the Atlantic through an artificial inlet. Tidal currents are the main factor controlling the lagoon’s hydrodynamics and, to a great extent, the sedimentary dynamic. The inner lagoonal zones receive input from several rivers and experience the pressure caused by the accumulation of organic matter and pollutants (namely, trace metals) from diverse anthropic activities. This paper is the first piece of work aiming to recognize, characterize and explain the main benthic foraminiferal biotopes in Ria de Aveiro. To provide a broad overview of this kind of setting, our results are compared to those of previous published studies conducted in similar transitional environments. The research is based on an investigation of 225 sites spread throughout this ecosystem. Utilizing a statistical approach, this study analyses the details of dead benthic foraminiferal assemblages composed of 260 taxa, the texture and composition (mineralogical and geochemical) of the sediment and physicochemical data. On the basis of the results of R-mode and Q-mode cluster analyses, several different biotopes can be defined as marsh biotope/near-marsh biotope; marginal urban/marginal urban mixing biotope; inner-outer lagoon biotope or enclosed lagoon; outer lagoon biotope, mixed sub-biotope; and outer lagoon, marine sub-biotope. These biotopes are related to foraminifera assemblages and substrate type and are influenced by local currents, water depth, chemical and physicochemical conditions, river or oceanic proximity, and anthropogenic impact, as evidenced by the mapping of the six factor loadings of the principal component analysis conducted herein. Based on a similar methodology of analysis as that applied in previous studies in the Lagoon of Venice, comparable biotypes were identified in Lagoon of Aveiro.

Certification and quality criteria of peloids used for therapeutic purposes

Abstract The empirical application of muds for therapeutic purposes is widely known. This is called pelotherapy and consists of the local or generalized application of a mixture of a solid phase and a liquid phase (peloid) for the recovery of arthro-rheumatic issues, bone-muscle traumatic damage and dermatological pathologies. During the time of mixing (maturation process) the mud is progressively colonized by thermophilic microorganisms that contribute to improvements in the peloid quality and endow the mud with organic substances. Several studies report diatoms as the main agent of thermal muds capable of producing anti-inflammatory sulphoglycolipid which renders the mud suitable for this use. The effect of the temperature is also considered important for therapeutic purposes. Recent studies assessed physical, chemical and technological properties of some peloids in use at spa centres. Some maturation surveys have also been performed in recent years. The need for quality criteria establishment and certification of clayey products intended to be used currently is evident, especially for peloids which have therapeutic action. Consequently, this study aims at the compilation and analysis of some characteristics of peloids from the literature in order to contribute to a major database that allows the establishment of regulations and quality criteria for suitable applications of peloids.

Identification and use of white clayey deposits from the area of Tamra (northern Tunisia) as ceramic raw materials

Abstract White clayey geomaterials were collected from northeast of the Nefza region (northern Tunisia). These deposits belong to the Mio-Pliocene molassic basins (basin of Tamra-Sidi Dris, Boukhchiba) and Oligocene Numidien in the area of El Aouinet. Analysis by X-ray diffraction showed associations of halloysite and kaolinite (Tamra), kaolinite and illite (Aouinet zone) and mixed layers, kaolinite and feldspars (Boukhchiba zone). Semi-industrial processed bricks showed promising characteristics and were visibly free of defects. Ceramic tiles had a bending strength that met the required standards but water absorption was somewhat high. So, to achieve higher quality, optimisation needs to be carried out in the formulation of batches or in the processing conditions. Finally, the incorporation in whitish sanitary-ware glaze formulations generated smooth coating layers that showed the required strong brightness and were free of defects.

Mineralogical and physicochemical characterization of selected Portuguese Mesozoic-Cenozoic muddy/clayey raw materials to be potentially used as healing clays

Abstract The use of pelitic geological materials for the treatment of muscle-bone-skin pathologies, by application of a cataplasm made of clay and mineral water mixture, is currently receiving attention and interest from the general public and scientific community. In Portugal there are several natural occurrences of clays/muds which are used for pelotherapy and/or geotherapy. These are carried out either indoors (thalassotherapy and thermal centres) or outdoors, in natural sites generally located near the seaside. The aim of this study is to assess the mineralogical and physicochemical properties of Portuguese raw materials for therapeutic purposes. These materials were collected from different Portuguese Mesozoic-Cenozoic geological formations located in the neighbourhood of thermal centres or at beaches known from their empirical applications. X-ray diffraction (XRD) and scanning electron microscopy (SEM-EDS) were used to assess the mineralogical composition of these clays. Physicochemical properties, such as specific surface area, cation exchange capacity, plasticity/abrasiveness indices and heat diffusiveness were also determined. Having distinct geological ages and genesis, the materials examined are mainly illitic. Less abundant kaolinite and smectite are also present. With respect to their physicochemical properties, all samples have good thermal properties which make them potentially suitable for therapeutic or aesthetic purposes.