Fien Van Lancker

Use of headspace SPME-GC-MS for the analysis of the volatiles produced by indoor molds grown on different substrates

An automated headspace solid phase microextraction method followed by GC-MS analysis was used to evaluate and compare the in vitro production of microbial volatile organic compounds (MVOCs) on malt extract agar, plasterboard and wallpaper. Five fungal strains were isolated from the walls of water-damaged houses and identified. In addition, four other common molds were studied. In general, MVOC production was the highest on malt extract agar. On this synthetic medium, molds typically produced 2-methylpropanol, 2-methylbutanol and 3-methylbutanol. On wallpaper, mainly 2-ethylhexanol, methyl 2-ethylhexanoate and compounds of the C8-complex such as 1-octene-3-ol, 3-octanone, 3-octanol and 1,3-octadiene were detected. The detection of 2-ethylhexanol and methyl 2-ethylhexanoate indicates an enhanced degradation of the substrate by most fungi. For growth on plasterboard, no typical metabolites were detected. Despite these metabolite differences on malt extract agar, wallpaper and plasterboard, some molds also produced specific compounds independently of the used substrate, such as trichodiene from Fusarium sporotrichioides and aristolochene from Penicillium roqueforti. Therefore, these metabolites can be used as markers for the identification and maybe also mycotoxin production of these molds. All five investigated Penicillium spp. in this study were able to produce two specific diterpenes, which were not produced by the other species studied. These two compounds, which remain unidentified until now, therefore seem specific for Penicillium spp. and are potentially interesting for the monitoring of this fungal genus. Further experiments will be performed with other Penicillium spp. to study the possibility that these two compounds are specific for this group of molds.

Formation of Pyrazines in Maillard Model Systems of Lysine-Containing Dipeptides

Whereas most studies concerning the Maillard reaction have focused on free amino acids, little information is available on the impact of peptides and proteins on this important reaction in food chemistry. Therefore, the formation of flavor compounds from the model reactions of glucose, methylglyoxal, or glyoxal with eight dipeptides with lysine at the N-terminus was studied in comparison with the corresponding free amino acids by means of stir bar sorptive extraction (SBSE) followed by GC-MS analysis. The reaction mixtures of the dipeptides containing glucose, methylglyoxal, and glyoxal produced 27, 18, and 2 different pyrazines, respectively. Generally, the pyrazines were produced more in the case of dipeptides as compared to free amino acids. For reactions with glucose and methylglyoxal, this difference was mainly caused by the large amounts of 2,5(6)-dimethylpyrazine and trimethylpyrazine produced from the reactions with dipeptides. For reactions with glyoxal, the difference in pyrazine production was rather small and mostly unsubstituted pyrazine was formed. A reaction mechanism for pyrazine formation from dipeptides was proposed and evaluated. This study clearly illustrates the capability of peptides to produce flavor compounds that can differ from those obtained from the corresponding reactions with free amino acids.

Mechanistic insights into furan formation in Maillard model systems.

Furan has recently received considerable attention as a possibly carcinogenic compound occurring in thermally processed foods. Although several food constituents have been identified as furan precursors, multiple formation pathways remain unclear. Therefore, the mechanisms of furan formation in Maillard model systems were studied by means of the carbon module labeling (CAMOLA) technique. Under both roasting and pressure-cooking conditions, furan was formed from glucose via the intact skeleton, and its formation pathways from glucose alone were not amino acid-dependent. However, some amino acids, especially alanine and serine, did influence the furan production by providing an additional formation pathway. Furthermore, most amino acids enhanced the furan production from glucose. Roasting conditions produced 25-100 times higher amounts of furan as compared to pressure-cooking conditions. Surprisingly, in the alanine/glucose model systems, the relative importance of furan production from glucose alone and from the combination of a glucose-derived and an alanine-derived fragment changed completely over a limited time course of 60 min.

Chemical modifications of peptides and their impact on food properties.

3.2. Peptide Backbone Modifications 7881 3.3. Peptide Side-Chain Modifications 7882 3.4. Peptide Cross-Linking 7883 3.5. Peptide Breakdown 7884 4. Reactions of Peptides with Carbonyl Compounds 7885 4.1. Reactions between Peptides and Carbohydrates 7885 4.1.

Amino acid catalysis of 2-alkylfuran formation from lipid oxidation-derived α,β-unsaturated aldehydes.

The formation of 2-alkylfurans from the corresponding lipid-derived α,β-unsaturated aldehydes under dry-roasting conditions was investigated in detail. The addition of an amino acid to an α,β-unsaturated aldehyde drastically increased 2-alkylfuran formation. Peptides and proteins as well were able to catalyze 2-alkylfuran formation from the corresponding α,β-unsaturated aldehydes. Further investigation of 2-alkylfuran formation showed the need of oxidizing conditions and the involvement of radicals in the reaction. This way, the formation of 2-methylfuran from 2-pentenal, 2-ethylfuran from 2-hexenal, 2-propylfuran from 2-heptenal, 2-butylfuran from 2-octenal, 2-pentylfuran from 2-nonenal, and 2-hexylfuran from 2-decenal was shown. The impact of amino acids on 2-alkylfuran formation from lipid-derived α,β-unsaturated aldehydes represents an interesting example of the complex role of amino acids in the multitude of chemical reactions occurring during thermal processing of lipid-rich foods.

Importance of Fat Oxidation in Starch-Based Emulsions in the Generation of the Process Contaminant Furan

The formation of the possibly carcinogenic process contaminant furan was studied in starch-based emulsions during heat treatments as applied for sterilization. Fresh and oxidized soybean, sunflower, high-oleic sunflower, olive, linseed, and rapeseed oils were compared. Results indicated that both the oil type, in particular, the fatty acid composition, and the oxidation degree of the oil determined the susceptibility of the oils to generate furan upon heating. Thus, oils containing the nutritionally relevant omega-3 unsaturated alpha-linolenic acid proved to be able to generate significant amounts of furan if the oils were oxidized. No clear relationship between p-anisidine values of various oils and the amount of generated furan could be observed. However, in the case of soybean oil, significantly more furan was produced upon an increase in oxidation degree. Surprisingly, furan formation in food-relevant systems containing fresh lipids proved to be a minor route (up to 1.5 ppb furan) compared to a previously studied vitamin C containing model system (up to 13 ppb furan).

Furan formation from lipids in starch-based model systems, as influenced by interactions with antioxidants and proteins.

The formation of furan upon sterilization of a lipid-containing starch gel was investigated in the presence of various antioxidants, namely, α-tocopherol, β-carotene, and ascorbic acid, with and without proteins. Results indicated that α-tocopherol did not significantly influence furan formation from oxidized lipids. β-Carotene, suggested previously to be a furan precursor itself, did influence the generation of furan in a concentration-dependent manner, although to a limited extent. Surprisingly, the presence of lipids seemed to limit the furan generation from β-carotene. Interestingly, the addition of ascorbic acid to the emulsions containing soybean or sunflower oils considerably enhanced the formation of furan from these oils. This was also the case when fresh oils were applied, shown previously to be nearly unable to generate furan. This observation can be explained by an intensified ascorbic acid degradation stimulated by the presence of lipids.

Impact of the N-terminal amino acid on the formation of pyrazines from peptides in Maillard model systems

Only a minor part of Maillard reaction studies in the literature focused on the reaction between carbohydrates and peptides. Therefore, in continuation of a previous study in which the influence of the peptide C-terminal amino acid was investigated, this study focused on the influence of the peptide N-terminal amino acid on the production of pyrazines in model reactions of glucose, methylglyoxal, or glyoxal. Nine different dipeptides and three tripeptides were selected. It was shown that the structure of the N-terminal amino acid is determinative for the overall pyrazine production. Especially, the production of 2,5(6)-dimethylpyrazine and trimethylpyrazine was low in the case of proline, valine, or leucine at the N-terminus, whereas it was very high for glycine, alanine, or serine. In contrast to the alkyl-substituted pyrazines, unsubstituted pyrazine was always produced more in the case of experiments with free amino acids. It is clear that different mechanisms must be responsible for this observation. This study clearly illustrates the capability of peptides to produce flavor compounds such as pyrazines.

On-fiber furan formation from volatile precursors: a critical example of artefact formation during Solid-Phase Microextraction.

For the analysis of furan, a possible carcinogen formed during thermal treatment of food, Solid-Phase Microextraction (SPME) is a preferred and validated sampling method. However, when volatile furan precursors are adsorbed on the carboxen/PDMS fiber, additional amounts of furan can be formed on the fiber during thermal desorption, as shown here for 2-butenal and furfural. No significant increase in furan amounts was found upon heating the furan precursor 2-butenal, indicating that the furan amounts formed during precursor heating experiments are negligible as compared to the additional amounts of furan formed during fiber desorption. This artefactual furan formation increased with increasing desorption time, but especially with increasing desorption temperature. Although this effect was most pronounced on the Carboxen/PDMS SPME-fiber, it was also noted on two other SPME-fibers tested (PDMS and DVB/Carboxen/PDMS). The general impact on furan data from food and model systems in literature will depend on the amounts of volatile precursors present, but will probably remain limited. However, considering the importance of this worldwide food contaminant, special care has to be taken during SPME-analysis of furan. Especially when performing precursor studies, static headspace sampling should preferably be applied for furan analysis.