Florence Croisier

Mechanical testing of electrospun PCL fibers

Poly(ε-caprolactone) (PCL) fibers ranging from 250 to 700 nm in diameter were produced by electrospinning a polymer tetrahydrofuran/N,N-dimethylformamide solution. The mechanical properties of the fibrous scaffolds and individual fibers were measured by different methods. The Youngs moduli of the scaffolds were determined using macro-tensile testing equipment, whereas single fibers were mechanically tested using a nanoscale three-point bending method, based on atomic force microscopy and force spectroscopy analyses. The modulus obtained by tensile-testing eight different fiber scaffolds was 3.8±0.8 MPa. Assuming that PCL fibers can be described by the bending model of isotropic materials, a Youngs modulus of 3.7±0.7 GPa was determined for single fibers. The difference of three orders of magnitude observed in the moduli of fiber scaffolds vs. single fibers can be explained by the lacunar and random structure of the scaffolds.

Polysaccharide‐Coated PCL Nanofibers for Wound Dressing Applications

Polysaccharide-based nanofibers with a multilayered structure are prepared by combining electrospinning (ESP) and layer-by-layer (LBL) deposition techniques. Charged nanofibers are firstly prepared by electrospinning poly(ε-caprolactone) (PCL) with a block-copolymer bearing carboxylic acid functions. After deprotonation of the acid groups, the layer-by-layer deposition of polyelectrolyte polysaccharides, notably chitosan and hyaluronic acid, is used to coat the electrospun fibers. A multilayered structure is achieved by alternating the deposition of the positively charged chitosan with the deposition of a negatively charged polyelectrolyte. The construction of this multilayered structure is followed by Zeta potential measurements, and confirmed by observation of hollow nanofibers resulting from the dissolution of the PCL core in a selective solvent. These novel polysaccharide-coated PCL fiber mats remarkably combine the mechanical resistance typical of the core material (PCL)-particularly in the hydrated state-with the surface properties of chitosan. The control of the nanofiber structure offered by the electrospinning technology, makes the developed process very promising to precisely design biomaterials for tissue engineering. Preliminary cell culture tests corroborate the potential use of such system in wound healing applications.

Chitosan-coated electrospun nanofibers with antibacterial activity

Charged nanofibers were prepared by electrospinning (ESP) poly(ε-caprolactone) with a copolymer bearing carboxylic acid functions. The presence of these functions allowed exposing some negative charges on the fiber surface, by dipping the fibers in a phosphate buffer. A layer of chitosan, a polycation in acidic medium, was then deposited on the nanofiber surface, thanks to electrostatic attraction. Fibers were characterized at each step of the process and the influence of the copolymer architecture on chitosan deposition was discussed. The antibacterial activity of the resulting fibers was finally assessed.

Poly(ethylene glycol) grafted polylactide based copolymers for the preparation of PLA-based nanocarriers and hybrid hydrogels

In previous works, poly(D,L-lactide-co-ɛCL-poly(ethylene glycol) (poly(D,L-La-co-αPEGɛCL) amphiphilic graft-copolymers were successfully synthesized according to a copper azide-alkyne cycloaddition (CuAAC) strategy. This paper aims at reporting on the behavior of this amphiphilic copolymer in water, which was not studied in the previous paper. Moreover, the ability of the copolymer to stabilize a PLA nanoparticles aqueous suspension is presented. For this purpose, dynamic light scattering (DLS) and transmission electron microscopy (TEM) are proposed to characterize the nanoparticles in solution. Otherwise, the strategy developed for the synthesis of the amphiphilic copolymers was adapted and extended to the synthesis of PLA-based degradable hydrogel, potentially applicable as drug-loaded degradable polymer implant.