Florencia Calaza

Oxygen Vacancy-Assisted Coupling and Enolization of Acetaldehyde on CeO2(111)

The temperature-dependent adsorption and reaction of acetaldehyde (CH(3)CHO) on a fully oxidized and a highly reduced thin-film CeO(2)(111) surface have been investigated using a combination of reflection-absorption infrared spectroscopy (RAIRS) and periodic density functional theory (DFT+U) calculations. On the fully oxidized surface, acetaldehyde adsorbs weakly through its carbonyl O interacting with a lattice Ce(4+) cation in the η(1)-O configuration. This state desorbs at 210 K without reaction. On the highly reduced surface, new vibrational signatures appear below 220 K. They are identified by RAIRS and DFT as a dimer state formed from the coupling of the carbonyl O and the acyl C of two acetaldehyde molecules. This dimer state remains up to 400 K before decomposing to produce another distinct set of vibrational signatures, which are identified as the enolate form of acetaldehyde (CH(2)CHO¯). Furthermore, the calculated activation barriers for the coupling of acetaldehyde, the decomposition of the dimer state, and the recombinative desorption of enolate and H as acetaldehyde are in good agreement with previously reported TPD results for acetaldehyde adsorbed on reduced CeO(2)(111) [Chen et al. J. Phys. Chem. C 2011, 115, 3385]. The present findings demonstrate that surface oxygen vacancies alter the reactivity of the CeO(2)(111) surface and play a crucial role in stabilizing and activating acetaldehyde for coupling reactions.

Variations in Reactivity on Different Crystallographic Orientations of Cerium Oxide

Cerium oxide is a principal component in many heterogeneous catalytic processes. One of its key characteristics is the ability to provide or remove oxygen in chemical reactions. The different crystallographic faces of ceria present significantly different surface structures and compositions that may alter the catalytic reactivity. The structure and composition determine the number of coordination vacancies surrounding surface atoms, the availability of adsorption sites, the spacing between adsorption sites and the ability to remove O from the surface. To investigate the role of surface orientation on reactivity, CeO2 films were grown with two different orientations. CeO2(100) films were grown ex situ by pulsed laser deposition on Nb-doped SrTiO3(100). CeO2(111) films were grown in situ by thermal deposition of Ce metal onto Ru(0001) in an oxygen atmosphere. The chemical reactivity was characterized by the adsorption and decomposition of various molecules such as alcohols, aldehydes and organic acids. In general the CeO2(100) surface was found to be more active, i.e. molecules adsorbed more readily and reacted to form new products, especially on a fully oxidized substrate. However the CeO2(100) surface was less selective with a greater propensity to produce CO, CO2 and water as products. The differences in chemical reactivity are discussed in light of possible structural terminations of the two surfaces. Recently nanocubes and nano-octahedra have been synthesized that display CeO2(100) and CeO2(111) faces, respectively. These nanoparticles enable us to correlate reactions on high surface area model catalysts at atmospheric pressure with model single crystal films in a UHV environment.

Carbon Dioxide Activation and Reaction Induced by Electron Transfer at an Oxide-Metal Interface

A model system has been created to shuttle electrons through a metal-insulator-metal (MIM) structure to induce the formation of a CO2 anion radical from adsorbed gas-phase carbon dioxide that subsequently reacts to form an oxalate species. The process is completely reversible, and thus allows the elementary steps involved to be studied at the atomic level. The oxalate species at the MIM interface have been identified locally by scanning tunneling microscopy, chemically by IR spectroscopy, and their formation verified by density functional calculations.

Coverage Effects on the Palladium-Catalyzed Synthesis of Vinyl Acetate: Comparison between Theory and Experiment

The high adsorbate coverages that form on the surfaces of many heterogeneous catalysts under steady-state conditions can significantly lower the activation energies for reactions that involve the coupling of two adsorbed intermediates while increasing those which result in adsorbate bond-breaking reactions. The influence of the surface coverage on the kinetics of metal-catalyzed reactions is often ignored in theoretical and even in some ultrahigh vacuum experimental studies. Herein, first principle density functional theoretical calculations are combined with experimental surface titration studies carried out over well-defined Pd(111) surfaces to explicitly examine the influence of coverage on the acetoxylation of ethylene to form vinyl acetate over Pd. The activation energies calculated for elementary steps in the Samanos and Moiseev pathways for vinyl acetate synthesis carried out on acetate-saturated palladium surfaces reveal that the reaction proceeds via the Samanos mechanism which is consistent with experimental results carried out on acetate-saturated Pd(111) surfaces. The rate-limiting step involves a beta-hydride elimination from the adsorbed acetoxyethyl intermediate, which proceeds with an apparent calculated activation barrier of 53 kJ/mol which is in very good agreement with the experimental barrier of 55 +/- 4 kJ/mol determined from kinetic measurements.

The adsorption of ethylene on Au/Pd(1 1 1) alloy surfaces

The adsorption of ethylene on gold–palladium alloys formed on a Pd(111) surface is investigated using a combination of temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). Various alloy compositions are obtained by depositing four monolayers of gold on a clean Pd(111) surface and annealing to various temperatures. For gold coverages greater than 0.7, ethylene adsorbs primarily on gold sites, desorbing with an activation energy of less than 55 kJ/mol. At gold coverages between 0.5 and 0.7, ethylene is detected on palladium sites in a p-bonded configuration (with a r–p parameter of 0.1) desorbing with an activation energy of between 57 and 62 kJ/mol. Further reducing the gold coverage leads to an almost linear increase in the desorption activation energy of ethylene with increasing palladium content until it eventually reaches a value of 76 kJ/mol found for ethylene on clean Pd(111). A corresponding increase in the r–p parameter is also found as the gold coverage decreases reaching a value of 0.8, assigned to di-r-bonded ethylene as found on clean Pd(111). 2006 Elsevier B.V. All rights reserved.

One-dimensional supramolecular surface structures: 1,4-diisocyanobenzene on Au(111) surfaces

One-dimensional supramolecular structures formed by adsorbing low coverages of 1,4-diisocyanobenzene on Au(111) at room temperature are obtained and imaged by scanning tunneling microscopy (STM) under ultrahigh vacuum (UHV) conditions. The structures originate from step edges or surface defects and arrange predominantly in a straight fashion on the substrate terraces along the <110> directions. They are proposed to consist of alternating units of 1,4-diisocyanobenzene molecules and gold atoms with a unit cell in registry with the substrate corresponding to four times the lattice interatomic distance. Their long 1-D chains and high thermal stability offer the potential to use them as conductors in nanoelectronic applications.

Cooperative Chemisorption-Induced Physisorption of CO2 Molecules by Metal–Organic Chains

Effective CO2 capture and reduction can be achieved through a molecular scale understanding of interaction of CO2 molecules with chemically active sites and the cooperative effects they induce in functional materials. Self-assembled arrays of parallel chains composed of Au adatoms connected by 1,4-phenylene diisocyanide (PDI) linkers decorating Au surfaces exhibit self-catalyzed CO2 capture leading to large scale surface restructuring at 77 K (ACS Nano 2014, 8, 8644-8652). We explore the cooperative interactions among CO2 molecules, Au-PDI chains and Au substrates that are responsible for the self-catalyzed capture by low temperature scanning tunneling microscopy (LT-STM), X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRAS), temperature-programmed desorption (TPD), and dispersion corrected density functional theory (DFT). Decorating Au surfaces with Au-PDI chains gives the interfacial metal-organic polymer characteristics of both a homogeneous and heterogeneous catalyst. Au-PDI chains activate the normally inert Au surfaces by promoting CO2 chemisorption at the Au adatom sites even at <20 K. The CO2(δ-) species coordinating Au adatoms in-turn seed physisorption of CO2 molecules in highly ordered two-dimensional (2D) clusters, which grow with increasing dose to a full monolayer and, surprisingly, can be imaged with molecular resolution on Au crystal terraces. The dispersion interactions with the substrate force the monolayer to assume a rhombic structure similar to a high-pressure CO2 crystalline solid rather than the cubic dry ice phase. The Au surface supported Au-PDI chains provide a platform for investigating the physical and chemical interactions involved in CO2 capture and reduction.

Stabilization of Carboxylate Surface Species on Pd(111)

The stabilization of formate and acetate surface species on Pd(111) has been studied by temperature-programmed desorption and infrared reflection absorption spectroscopy (IRRAS). In addition to the previously reported stabilization of carboxylate species by the pre-adsorption of oxygen, an even bigger stabilizing effect was observed upon the adsorption of carbon monoxide onto formate- and acetate-covered surfaces. The presence of carbon monoxide delays the decomposition of carboxylate species by blocking surrounding sites. Proper use of co-adsorbed species could help to improve selectivity or activity in heterogeneous catalytic reactions.

Supports and modified nano-particles for designing model catalysts

In order to design catalytic materials, we need to understand the essential causes for material properties resulting from its composite nature. In this paper we discuss two, at first sight, diverse aspects: (a) the effect of the oxide-metal interface on metal nanoparticle properties and (b) the consequences of metal particle modification after activation on the selectivity of hydrogenation reactions. However, these two aspects are intimately linked. The metal nanoparticles electronic structure changes at the interface as a catalyst is brought to different reaction temperatures due to morphological modifications in the metal and, as we will discuss, these changes in the chemistry lead to changes in the reaction path. As the morphology of the particle varies, facets of different orientations and sizes are exposed, which may lead to a change in the surface chemistry as well. We use two specific reactions to address these issues in some detail. To the best of our knowledge, the present paper reports the first observations of this kind for well-defined model systems. The changes in the electronic structure of Au nanoparticles due to their size and interaction with a supporting oxide are revealed as a function of temperature using CO2 activation as a probe. The presence of spectator species (oxopropyl), formed during an activation step of acrolein hydrogenation, strongly controls the selectivity of the reaction towards hydrogenation of the unsaturated C[double bond, length as m-dash]O bond vs. the C[double bond, length as m-dash]C bond on Pd(111) when compared with oxide-supported Pd nanoparticles.

Toward an Understanding of Selective Alkyne Hydrogenation on Ceria: On the Impact of O Vacancies on H2 Interaction with CeO2(111)

Ceria (CeO2) has recently been found to be a promising catalyst in the selective hydrogenation of alkynes to alkenes. This reaction occurs primarily on highly dispersed metal catalysts, but rarely on oxide surfaces. The origin of the outstanding activity and selectivity observed on CeO2 remains unclear. In this work, we show that one key aspect of the hydrogenation reaction-the interaction of hydrogen with the oxide-depends strongly on the presence of O vacancies within CeO2. Through infrared reflection absorption spectroscopy on well-ordered CeO2(111) thin films and density functional theory (DFT) calculations, we show that the preferred heterolytic dissociation of molecular hydrogen on CeO2(111) requires H2 pressures in the mbar regime. Hydrogen depth profiling with nuclear reaction analysis indicates that H species stay on the surface of stoichiometric CeO2(111) films, whereas H incorporates as a volatile species into the volume of partially reduced CeO2-x(111) thin films (x ∼ 1.8-1.9). Complementary DFT calculations demonstrate that oxygen vacancies facilitate H incorporation below the surface and that they are the key to the stabilization of hydridic H species in the volume of reduced ceria.