Florian Gottsauner-Wolf

Serum Cobalt Levels After Metal-on-Metal Total Hip Arthroplasty

BACKGROUND Systemic cobalt dissemination from the Metasul Co-28Cr-6Mo-0.2C metal-on-metal total hip prosthesis has been demonstrated in the first year after implantation. The aim of this prospective study was to monitor the serum cobalt concentrations in patients during the first five years after total hip arthroplasty with a metal-on-metal articulation. METHODS A total hip arthroplasty was performed without cement in 100 consecutive patients who had either unilateral osteoarthritis or unilateral osteonecrosis. Fifty patients were randomized to be treated with a metal-on-metal articulation, and fifty patients, with a ceramic-on-polyethylene bearing. The femoral stem was made of a Ti-6Al-7Nb alloy, and the threaded acetabular cup was made of commercially pure titanium. Blood samples were taken before the operation and at multiple time-points for five years after the operation. Serum cobalt concentrations were measured with use of atomic absorption spectrometry. RESULTS In the metal-on-metal group, the median serum cobalt concentration was 1 micro g/L at one year after surgery and 0.7 micro g/L at five years. The median of the serum cobalt concentrations measured from three to twelve months did not differ from the median of subsequent measurements, with the numbers available. The median serum cobalt level in the control group of patients treated with the ceramic-on-polyethylene articulation was below the detection limit at all time-points. CONCLUSIONS Systemic cobalt release from Metasul metal-on-metal articulations was demonstrated throughout the five-year study period. The median serum cobalt concentrations were found to be slightly above the detection limit and remained in a constant range. The serum cobalt concentrations did not reflect a so-called run-in wear period of the metal-on-metal articulations.

Aggressive warming reduces blood loss during hip arthroplasty.

We evaluated the effects of aggressive warming and maintenance of normothermia on surgical blood loss and allogeneic transfusion requirement. We randomly assigned 150 patients undergoing total hip arthroplasty with spinal anesthesia to aggressive warming (to maintain a tympanic membrane temperature of 36.5°C) or conventional warming (36°C). Autologous and allogeneic blood were given to maintain a priori designated hematocrits. Blood loss was determined by a blinded investigator based on sponge weight and scavenged cells; postoperative loss was determined from drain output. Results were analyzed on an intention-to-treat basis. Average intraoperative core temperatures were warmer in the patients assigned to aggressive warming (36.5° ± 0.3° vs 36.1° ± 0.3°C, P < 0.001). Mean arterial pressure was similar in each group preoperatively, but was greater intraoperatively in the conventionally warmed patients: 86 ± 12 vs 80 ± 9 mm Hg, P < 0.001. Intraoperative blood loss was significantly greater in the conventional warming (618 mL; interquartile range, 480–864 mL) than the aggressive warming group (488 mL; interquartile range, 368–721 mL;P = 0.002), whereas postoperative blood loss did not differ in the two groups. Total blood loss during surgery and over the first two postoperative days was also significantly greater in the conventional warming group (1678 mL; interquartile range, 1366–1965 mL) than in the aggressively warmed group (1,531 mL; interquartile range, 1055–1746 mL, P = 0.031). A total of 40 conventionally warmed patients required 86 units of allogeneic red blood cells, whereas 29 aggressively warmed patients required 62 units (P = 0.051 and 0.061, respectively). We conclude that aggressive intraoperative warming reduces blood loss during hip arthroplasty. Implications Aggressive warming better maintained core temperature (36.5° vs 36.1°C) and slightly decreased intraoperative blood pressure. Aggressive warming also decreased blood loss by approximately 200 mL. Aggressive warming may thus, be beneficial in patients undergoing hip arthroplasty.

ELEVATED SERUM COBALT WITH METAL-ON-METAL ARTICULATING SURFACES

We determined serum cobalt levels in 55 patients by atomic absorption spectrophotometry before and after implantation of uncemented total hip arthroplasties. In a randomised, prospective trial 27 wrought Co-28Cr-6Mo-0.2C metal-on-metal articulations were compared with 28 ceramic-on-polyethylene hips which did not contain cobalt. Other sources of iatrogenic cobalt loading were excluded. The metal-on-metal group produced detectable serum cobalt levels (median 1.1 microg/l after one year) which were significantly different (p < 0.0001) from those of the ceramic-on-polyethylene control group (median below detection limit of 0.3 microg/l after one year). Our findings indicate that metal-on-metal bearings generate some systemic release of cobalt.

Cementless total hip arthroplasty with a tapered, rectangular titanium stem and a threaded cup: a minimum ten-year follow-up.

Background: We report the results of cementless total hip arthroplasty with a tapered, rectangular titanium stem that was introduced in 1979 and continues to be used today with only minor changes. The aim of the design is to achieve primary stability to resist rotational and axial forces through precision rasping and press-fit implantation of a tapered, rectangular femoral component.Methods: Between October 1986 and November 1987, 208 total hip arthroplasties with insertion of a tapered, rectangular titanium stem and a threaded cup without cement were performed in 200 consecutive patients (average age, sixty-one years; range, twenty-two to eighty-four years).Results: At the time of the latest follow-up, fifty-one patients (fifty-two hips) had died and sixteen patients had been lost to follow-up, leaving 133 patients. Twelve hips had been revised, two in patients who subsequently died, leaving 123 living patients without revision. The median follow-up time was 120.7 months. Five cups needed revision surgery because of aseptic loosening; two, because of massive polyethylene wear; one, because of posttraumatic migration; and one, because of breakage. Three femoral stems were revised: one because of malpositioning (the reoperation was done five days after implantation); one, because of infection; and the third, after multiple failed acetabular revisions. The mean Harris hip score for the patients who did not have revision was 85.4 points (range, 46 to 100 points) at the time of the latest follow-up. Four patients (3%) complained of thigh pain that was not associated with another disorder. According to the criteria of Engh et al., all femoral implants were graded as stable bone-ingrown. The probability of survival of both the femoral and the acetabular component at ten years, with any revision as the end point, was 0.92 (95% confidence interval, 0.88 to 0.97). The probability of survival of the cup was 0.93 (95% confidence interval, 0.89 to 0.97), and that of the stem was 0.99 (95% confidence interval, 0.97 to 1.00).Conclusions: The results of arthroplasty with a tapered, rectangular titanium stem combined with a conical threaded cup inserted without cement were excellent at a minimum of ten years. Our data suggest that femoral stem fixation continues to be secure, while the threaded cup is prone to aseptic loosening.

Changes in bone mineral density in the proximal femur after cementless total hip arthroplasty: A FIVE-YEAR LONGITUDINAL STUDY

We investigated prospectively the bone mineral density (BMD) of the proximal femur after implantation of a tapered rectangular cementless stem in 100 patients with a mean age of 60 years (16 to 87). It was determined using dual energy x-ray absorptiometry, performed one week after surgery and then every six months until the end-point of five years. The BMD increased significantly in Gruen zones 2, 4 and 5 by 11%, 3% and 11% respectively, and decreased significantly in Gruen zones 1, 6 and 7 by 3%, 6% and 14% respectively, over the five-year period. The net mean BMD did not change over this time period. The changes in the BMD were not confined to the first 12 months after surgery. This investigation revealed no change in the overall periprosthetic BMD, but demonstrated a regional redistribution of bone mass from the proximal to distal zones.

Rotationplasty for limb salvage in the treatment of malignant tumors at the knee. A follow-up study of seventy patients.

Seventy patients who had a rotationplasty for treatment of a malignant tumor in the region of the knee (the femur or the tibia) between 1974 and 1987 were followed for two to thirteen years (mean duration of follow-up, four years). Forty-seven patients had a stage-IIB osteosarcoma; the remaining twenty-three patients had a malignant fibrous histiocytoma, a chondrosarcoma, a Ewing sarcoma, or a giant-cell tumor. The most severe postoperative complication was occlusion of the reanastomosed vessels (seven patients), leading to amputation proximal to the knee in three patients. Other complications were problems with wound-healing (eight patients), transient nerve palsy (five patients), irreversible nerve palsy (two patients), pseudarthrosis (four patients), and rotational malalignment (one patient). Late complications included eight fractures, two infections, two delayed unions, and one lymphatic fistula. More than half of the patients were free of complications related to the operative procedure. Forty-four of the patients who had a stage-IIB osteosarcoma could be followed, and their data were analyzed for survival statistics. These patients had a 58 percent rate of disease-free survival and a 70 per cent rate of over-all survival. One patient had a local recurrence five years after the operation.

Cementless Total Hip Arthroplasty with the Rectangular Titanium Zweymüller Stem

In 2002 and 2006, we reported the long-term results of 208 total hip replacements performed with the Zweymuller stem and a threaded cup in 200 patients. The present study gives an update on this patient cohort. At a minimum of twenty years postoperatively, seventy-three patients (seventy-five hips) were available for follow-up; twelve patients were lost to follow-up. The key findings of our previous reports were the absence of aseptic femoral stem loosening and a poor rate of survival of the threaded cup. Since then, two revisions have been performed because of aseptic stem loosening. We observed osteolytic lesions around the proximal part of the femoral component on twenty-four (47%) of fifty-one radiographs, but no stem was deemed at risk for loosening. The probability of survival of the stem at twenty years was 0.96 (95% confidence interval, 0.91 to 0.99), and the probability of survival of the cup at twenty years was 0.67 (95% confidence interval, 0.57 to 0.75). The Zweymuller femoral stem, a tapered, rectangular implant, continues to give excellent long-term results.

Function of reinserted abductor muscles after femoral replacement

We compared two methods of reconstruction of the abductor mechanism in 15 patients after prosthetic replacement of the upper femur, to assess abductor strength and function. Six patients in group I had direct fixation of the gluteus medius tendon and a segment of the original bone to the prosthesis. Nine patients in group 2 had the abductor tendon fixed to the iliotibial band. We assessed clinical function, isometric muscle strength and muscle cross-sectional area for each patient. The patients in group 1 had better clinical and functional results (p = 0.059), with average peak torques for hip abduction of 92% of that in the non-operated leg in group 1, and of 57% in group 2. Group 1 had a mean muscle cross-sectional area of 69% and a mean value of strength per cross-sectional area of 134% when compared with the control side. The respective values for group 2 were 52% and 91%. Direct fixation of the abductor muscles to the prostheses gave improved function and higher isometric abductor muscle force.

Serum aluminium and cobalt levels after ceramic-on-ceramic and metal-on-metal total hip replacement

In a randomised study, 28 patients with a mean age of 62.2 years (32 to 81) with osteoarthritis or avascular necrosis of the hip received either a ceramic-on-ceramic or a metal-on-metal total hip replacement. Apart from the liners the acetabular and femoral components were made of Ti-Al-Nb alloy. The serum aluminium and cobalt levels were measured before, and at one year after surgery. The 15 patients in the ceramic-on-ceramic group had a median pre-operative aluminium level of 1.3 microg/l (0.25 to 8.4) and a cobalt level below the detection limit. At one year the aluminium level was 1.1 microg/l (0.25 to 2.3) and the cobalt level was 0.4 microg/l (0.15 to 0.7). The 13 patients in the metal-on-metal group had a median pre-operative aluminium level of 1.9 microg/l (0.25 to 4.4) and a cobalt level below the detection limit. At one year the median aluminium level was 0.9 microg/l (0.25 to 3.9) whereas the cobalt level was 1.4 microg/l (0.5 to 10.5). This increase in the cobalt level at one year was significant (p < 0.001). Our findings indicate that ceramic-on-ceramic bearings do not cause elevated levels of serum aluminium in the first post-operative year.

Detection of orthopaedic prostheses at airport security checks

We studied the detection of joint replacements at airport security checks in relation to their weight, using two types of detector arch. A single-source, unilateral detector showed different sensitivities for implants on different sides of a test subject. All implants weighing more than 145 g were detected by one of the arches. The degree of detection was directly related to the logarithm of the weight of the prosthesis in patients, with a linear correlation (r2 = 0.61). A bilateral arch detected all prostheses weighing over 195 g. With their usual sensitivity settings many joint replacements were detectable; an identification pass containing the site and weight of such prostheses would help to avoid the need for body-search procedures.