Florian Hibbe

The nature of surface barriers on nanoporous solids explored by microimaging of transient guest distributions.

Nanoporous solids are attractive materials for energetically efficient and environmentally friendly catalytic and adsorption separation processes. Although the performance of such materials is largely dependent on their molecular transport properties, our fundamental understanding of these phenomena is far from complete. This is particularly true for the mechanisms that control the penetration rate through the outer surface of these materials (commonly referred to as surface barriers). Recent detailed sorption rate measurements with Zn(tbip) crystals have greatly enhanced our basic understanding of such processes. Surface resistance in this material has been shown to arise from the complete blockage of most of the pore entrances on the outer surface, while the transport resistance of the remaining open pores is negligibly small. More generally, the revealed correlation between intracrystalline diffusion and surface permeation provides a new view of the nature of transport resistances in nanoporous materials acting in addition to the diffusion resistance of the regular pore network, leading to a rational explanation of the discrepancy which is often observed between microscopic and macroscopic diffusion measurements.

Microimaging of transient guest profiles to monitor mass transfer in nanoporous materials

The intense interactions of guest molecules with the pore walls of nanoporous materials is the subject of continued fundamental research. Stimulated by their thermal energy, the guest molecules in these materials are subject to a continuous, irregular motion, referred to as diffusion. Diffusion, which is omnipresent in nature, influences the efficacy of nanoporous materials in reaction and separation processes. The recently introduced techniques of microimaging by interference and infrared microscopy provide us with a wealth of information on diffusion, hitherto inaccessible from commonly used techniques. Examples include the determination of surface barriers and the sticking coefficients analogue, namely the probability that, on colliding with the particle surface, a molecule may continue its diffusion path into the interior. Microimaging is further seen to open new vistas in multicomponent guest diffusion (including the detection of a reversal in the preferred diffusion pathways), in guest-induced phase transitions in nanoporous materials and in matching the results of diffusion studies under equilibrium and non-equilibrium conditions.

Monitoring Molecular Mass Transfer in Cation-Free Nanoporous Host Crystals of Type AlPO-LTA

Micro-imaging is employed to monitor the evolution of intra-crystalline guest profiles during molecular adsorption and desorption in cation-free zeolites AlPO-LTA. The measurements are shown to provide direct evidence on the rate of intra-crystalline diffusion and surface permeation and their inter-relation. Complemented by PFG NMR and integral IR measurements, a comprehensive overview of the diffusivities of light hydrocarbons in this important type of host materials is provided.

Micro-Imaging by Interference Microscopy: A Case Study of Orientation-Dependent Guest Diffusion in MFI-Type Zeolite Host Crystals

Because of the small particle size, orientation-dependent diffusion measurements in microporous materials remains a challenging task. We highlight here the potential of micro-imaging by interference microscopy in a case study with MFI-type crystals in which, although with different accuracies, transient concentration profiles in all three directions can be observed. The measurements, which were performed with “rounded-boat” shaped crystals, reproduce the evolution patterns of the guest profiles recorded in previous studies with the more common “coffin-shaped” MFI crystals. The uptake and release patterns through the four principal faces (which in the coffin-shaped crystals extend in the longitudinal direction) are essentially coincident and there is no perceptible mass transfer in the direction of the long axis. The surface resistances of the four crystal faces through which mass transfer occurs are relatively small and have only a minor effect on the mass transfer rate. As a result of the pore structure, diffusion in the crystallographic c direction (which corresponds to the direction of the long axis) is expected to be much slower than in the transverse directions. This could explain the very low rate of mass transfer observed in the direction of the long axis, but it is also possible that the small end faces of the crystal may have high surface resistance. It is not possible to distinguish unequivocally between these two possibilities. All guest molecules studied (methyl-butane, benzene and 4-methyl-2-pentyne) show the same orientation dependence of mass transfer. The long 4-methyl-2-pentyne molecules would be expected to propagate at very different rates through the straight and sinusoidal channels. The coinciding patterns for uptake through the mutually perpendicular crystal faces therefore provide clear evidence that both the coffin shaped crystals and the rounded-boat-shaped crystals considered in this study, must be intergrowths rather than pure single crystals.

Micro-imaging of transient guest profiles in nanoporous host systems of cylindrical symmetry.

Nanoporous host materials giving rise to transient guest profiles of cylindrical symmetry during molecular uptake and release are shown to provide particularly advantageous conditions for the study of guest diffusion by micro-imaging. Considering zeolites of structure type DDR (Deca-dodecasil 3R) as a host system and short-chain length hydrocarbons as guest molecules, the benefits thus attainable in micro-imaging studies using interference microscopy are shown to include the determination of transient concentration profiles with improved accuracy, the option to overcome the disturbing impact of surface imperfections, and easy access to concentration-dependent diffusivities.