Francis Hindle

Detection and quantification of multiple molecular species in mainstream cigarette smoke by continuous-wave terahertz spectroscopy

Continuous-wave terahertz spectroscopy by photomixing is applied to the analysis of mainstream cigarette smoke. Using the wide tunability of the source, spectral signatures of hydrogen cyanide (HCN), carbon monoxide (CO), formaldehyde (H2CO), and water (H2O) have been observed from 500 to 2400 GHz. The fine spectral purity allows direct concentration measurement from the pure rotational transitions of HCN and CO. The quantification of the measurement was validated by the means of a calibration gas containing CO. The potential of this technique for trace gas detection is demonstrated with an estimated detection limit of HCN equal to 9 parts in 10(6).

Toward in-cylinder absorption tomography in a production engine

Design requirements for an 8000 frame/s dual-wavelength ratiometric chemical species tomography system, intended for hydrocarbon vapor imaging in one cylinder of a standard automobile engine, are examined. The design process is guided by spectroscopic measurements on iso-octane and by comprehensive results from laboratory phantoms and research engines, including results on temporal resolution performance. Novel image reconstruction techniques, necessary for this application, are presented. Recent progress toward implementation, including details of the optical access arrangement employed and signal-to-noise issues, is described. We present first cross-cylinder IR absorption measurements from a reduced channel-count (nontomographic) system and discuss the prospects for imaging.

Inscription of long-period gratings in pure silica and Germano-silicate fiber cores by femtosecond laser irradiation

Long-period gratings (LPGs) have been inscribed by femtosecond laser radiation into fiber optics with Ge-doped and pure silica cores. Grating parameters of 16-dB rejection and 0.3-dB insertion loss are obtained for a Ge-doped fiber core. Numerical calculation of the transmission characteristics yielded a good correlation between the measured and synthetic data showing that an induced refractive index change up to 3/spl times/10/sup -4/ can be achieved. Inscription of an LPG in pure silica fiber core is demonstrated and thought to be first achieved in this fiber type. Greater laser intensity is required in pure silica compared with Ge-doped cores to produce a refractive index change of similar magnitude.

Spectrally interleaved, comb-mode-resolved spectroscopy using swept dual terahertz combs

Optical frequency combs are innovative tools for broadband spectroscopy because a series of comb modes can serve as frequency markers that are traceable to a microwave frequency standard. However, a mode distribution that is too discrete limits the spectral sampling interval to the mode frequency spacing even though individual mode linewidth is sufficiently narrow. Here, using a combination of a spectral interleaving and dual-comb spectroscopy in the terahertz (THz) region, we achieved a spectral sampling interval equal to the mode linewidth rather than the mode spacing. The spectrally interleaved THz comb was realized by sweeping the laser repetition frequency and interleaving additional frequency marks. In low-pressure gas spectroscopy, we achieved an improved spectral sampling density of 2.5 MHz and enhanced spectral accuracy of 8.39 × 10−7 in the THz region. The proposed method is a powerful tool for simultaneously achieving high resolution, high accuracy, and broad spectral coverage in THz spectroscopy.We demonstrated combination of gapless terahertz (THz) comb with dual-comb spectroscopy, namely gapless dual-THz-comb spectroscopy, to achieve the spectral resolution equal to width of the THz comb tooth. The gapless THz comb was realized by interpolating frequency gaps between the comb teeth with sweeping of a laser mode-locked frequency. The demonstration of low-pressure gas spectroscopy with gapless dual-THz-comb spectroscopy clearly indicated that the spectral resolution was decreased down to 2.5-MHz width of the comb tooth and the spectral accuracy was enhanced to 10-6 within the spectral range of 1THz. The proposed method will be a powerful tool to simultaneously achieve high resolution, high accuracy, and broad spectral coverage in THz spectroscopy.

Chemical species tomography by near infra-red absorption

The spatial distribution of chemical species can be a critical determinant of the performance of chemical reactors. One such reactor is the combustion chamber of the Internal Combustion engine. This paper presents a design for the measurement of hydrocarbon concentration distribution within a running engine using near infra-red absorption tomography. The fundamentals of the technique, and design parameters for the equipment are discussed. By utilising micro-optic components, a minimally invasive system is feasible and by utilising advanced laser/photodetector combinations, good temporal performance is anticipated.

Terahertz Comb Spectroscopy Traceable to Microwave Frequency Standard

The fine-structured spectrum of a terahertz (THz) frequency comb has been observed using asynchronous-optical-sampling THz time-domain spectroscopy with an extended time window covering multiple THz pulses. Fourier transformation of 10 consecutive THz pulses enables us to obtain the spectrum of THz comb mode having a linewidth of 25 MHz at intervals of 250 MHz. Further expansion of time window up to 100 consecutive THz pulses reduces the linewidth of THz comb mode down to 2.5 MHz while conserving interval of 250 MHz. The observed THz comb mode can be used as a precise and accurate frequency marker for broadband THz spectroscopy because it is phase-locked to a microwave frequency standard by laser control. The spectroscopy of pharmaceutical tablets and low-pressure molecular gas is used to demonstrate the utility of this approach, indicating a spectral resolution of 250 MHz. The proposed method enables frequency calibration of the THz spectrometer based on a microwave frequency standard.

Recent Developments of an Opto-Electronic THz Spectrometer for High-Resolution Spectroscopy

A review is provided of sources and detectors that can be employed in the THz range before the description of an opto-electronic source of monochromatic THz radiation. The realized spectrometer has been applied to gas phase spectroscopy. Air-broadening coefficients of HCN are determined and the insensitivity of this technique to aerosols is demonstrated by the analysis of cigarette smoke. A multiple pass sample cell has been used to obtain a sensitivity improvement allowing transitions of the volatile organic compounds to be observed. A solution to the frequency metrology is presented and promises to yield accurate molecular line center measurements.

Enhancement of spectral resolution and accuracy in asynchronous-optical-sampling terahertz time-domain spectroscopy for low-pressure gas-phase analysis

The spectral resolution and accuracy of asynchronous-optical-sampling terahertz time-domain spectroscopy (ASOPS-THz-TDS) were evaluated by examining low-pressure gas-phase samples. Use of dual 56-MHz, erbium (Er)-doped, mode-locked femtosecond fiber lasers enhanced the spectral resolution to as low as 50.5 MHz and the spectral accuracy to as low as 6.2 × 10(-6). The results indicate that ASOPS-THz-TDS has the potential to achieve high spectral resolution, high spectral accuracy, and wide spectral coverage at the same time. ASOPS-THz-TDS will open a new door to gas-phase spectroscopy of multiple chemical species in the field of atmospheric gas analysis.

Adaptive sampling dual terahertz comb spectroscopy using dual free-running femtosecond lasers.

Terahertz (THz) dual comb spectroscopy (DCS) is a promising method for high-accuracy, high-resolution, broadband THz spectroscopy because the mode-resolved THz comb spectrum includes both broadband THz radiation and narrow-line CW-THz radiation characteristics. In addition, all frequency modes of a THz comb can be phase-locked to a microwave frequency standard, providing excellent traceability. However, the need for stabilization of dual femtosecond lasers has often hindered its wide use. To overcome this limitation, here we have demonstrated adaptive-sampling THz-DCS, allowing the use of free-running femtosecond lasers. To correct the fluctuation of the time and frequency scales caused by the laser timing jitter, an adaptive sampling clock is generated by dual THz-comb-referenced spectrum analysers and is used for a timing clock signal in a data acquisition board. The results not only indicated the successful implementation of THz-DCS with free-running lasers but also showed that this configuration outperforms standard THz-DCS with stabilized lasers due to the slight jitter remained in the stabilized lasers.

Fiber-based UV laser-diode fluorescence sensor for commercial gasolines

We report on an optical fiber probe, coupled to a 404-nm laser diode, as a fluorescence sensor for monitoring of commercial gasolines. The principle of operation of the sensor is based on quantifying the intensity of the Stokes-shifted fluorescence from some of the heavier polycyclic aromatic hydrocarbons C/sub x/H/sub y/,(x,y) /spl ges/ (14,10) present in gasolines as minor constituents. The normalized efficiency of the optical fiber probe, as a function of its geometry, is calculated in the cases of single-fiber and parallel dual-fiber designs. The spatial and temporal resolutions achievable by the sensor are discussed as a function of design parameters The performance of the sensor is investigated experimentally for commercial gasolines in the liquid and gas phase. The optimal excitation wavelength for such sensors is investigated in the range of 350-400 nm. The linear sensitivity to vapor concentrations of retail gasoline fuel is demonstrated in the range of 4%-125% of combustion stoichiometry at 10 bar and 180/spl deg/C. Statistical processing of the data from the sensor allows distinction to be made between different forecourt gasoline suppliers, as well as fuel varieties (unleaded, low sulfur, etc.).