Francisco B. Pereira

Optimization of low-cost medium for very high gravity ethanol fermentations by Saccharomyces cerevisiae using statistical experimental designs.

Statistical experimental designs were used to develop a medium based on corn steep liquor (CSL) and other low-cost nutrient sources for high-performance very high gravity (VHG) ethanol fermentations by Saccharomyces cerevisiae. The critical nutrients were initially selected according to a Plackett-Burman design and the optimized medium composition (44.3 g/L CSL; 2.3 g/L urea; 3.8 g/L MgSO₄·7H₂O; 0.03 g/L CuSO₄·5H₂O) for maximum ethanol production by the laboratory strain CEN.PK 113-7D was obtained by response surface methodology, based on a three-level four-factor Box-Behnken design. The optimization process resulted in significantly enhanced final ethanol titre, productivity and yeast viability in batch VHG fermentations (up to 330 g/L glucose) with CEN.PK113-7D and with industrial strain PE-2, which is used for bio-ethanol production in Brazil. Strain PE-2 was able to produce 18.6±0.5% (v/v) ethanol with a corresponding productivity of 2.4±0.1g/L/h. This study provides valuable insights into cost-effective nutritional supplementation of industrial fuel ethanol VHG fermentations.

Industrial robust yeast isolates with great potential for fermentation of lignocellulosic biomass.

The search of robust microorganisms is essential to design sustainable processes of second generation bioethanol. Yeast strains isolated from industrial environments are generally recognised to present an increased stress tolerance but no specific information is available on their tolerance towards inhibitors that come from the pretreatment of lignocellulosic materials. In this work, a strategy for the selection of different yeasts using hydrothermal hydrolysate from Eucalyptus globulus wood, containing different concentrations of inhibitors, was developed. Ten Saccharomyces cerevisiae and four Kluyveromyces marxianus strains isolated from industrial environments and four laboratory background strains were evaluated. Interestingly, a correlation between final ethanol titer and percentage of furfural detoxification was observed. The results presented here highlight industrial distillery environments as a remarkable source of efficient yeast strains for lignocellulosic fermentation processes. Selected strains were able to resourcefully degrade furfural and HMF inhibitors, producing 0.8g ethanol/Lh corresponding to 94% of the theoretical yield.

Robust industrial Saccharomyces cerevisiae strains for very high gravity bio-ethanol fermentations

The application and physiological background of two industrial Saccharomyces cerevisiae strains, isolated from harsh industrial environments, were studied in Very High Gravity (VHG) bio-ethanol fermentations. VHG laboratory fermentations, mimicking industrially relevant conditions, were performed with PE-2 and CA1185 industrial strains and the CEN.PK113-7D laboratory strain. The industrial isolates produced remarkable high ethanol titres (>19%, v/v) and accumulated an increased content of sterols (2 to 5-fold), glycogen (2 to 4-fold) and trehalose (1.1-fold), relatively to laboratory strain. For laboratory and industrial strains, a sharp decrease in the viability and trehalose concentration was observed above 90 g l⁻¹ and 140 g l⁻¹ ethanol, respectively. PE-2 and CA1185 industrial strains presented important physiological differences relatively to CEN.PK113-7D strain and showed to be more prepared to cope with VHG stresses. The identification of a critical ethanol concentration above which viability and trehalose concentration decrease significantly is of great importance to guide VHG process engineering strategies. This study contributes to the improvement of VHG processes by identifying yeast isolates and gathering yeast physiological information during the intensified fermentation process, which, besides elucidating important differences between these industrial and laboratory strains, can drive further process optimization.

Identification of candidate genes for yeast engineering to improve bioethanol production in very high gravity and lignocellulosic biomass industrial fermentations

BackgroundThe optimization of industrial bioethanol production will depend on the rational design and manipulation of industrial strains to improve their robustness against the many stress factors affecting their performance during very high gravity (VHG) or lignocellulosic fermentations. In this study, a set of Saccharomyces cerevisiae genes found, through genome-wide screenings, to confer resistance to the simultaneous presence of different relevant stresses were identified as required for maximal fermentation performance under industrial conditions.ResultsChemogenomics data were used to identify eight genes whose expression confers simultaneous resistance to high concentrations of glucose, acetic acid and ethanol, chemical stresses relevant for VHG fermentations; and eleven genes conferring simultaneous resistance to stresses relevant during lignocellulosic fermentations. These eleven genes were identified based on two different sets: one with five genes granting simultaneous resistance to ethanol, acetic acid and furfural, and the other with six genes providing simultaneous resistance to ethanol, acetic acid and vanillin. The expression of Bud31 and Hpr1 was found to lead to the increase of both ethanol yield and fermentation rate, while Pho85, Vrp1 and Ygl024w expression is required for maximal ethanol production in VHG fermentations. Five genes, Erg2, Prs3, Rav1, Rpb4 and Vma8, were found to contribute to the maintenance of cell viability in wheat straw hydrolysate and/or the maximal fermentation rate of this substrate.ConclusionsThe identified genes stand as preferential targets for genetic engineering manipulation in order to generate more robust industrial strains, able to cope with the most significant fermentation stresses and, thus, to increase ethanol production rate and final ethanol titers.

Genome-wide screening of Saccharomyces cerevisiae genes required to foster tolerance towards industrial wheat straw hydrolysates

The presence of toxic compounds derived from biomass pre-treatment in fermentation media represents an important drawback in second-generation bio-ethanol production technology and overcoming this inhibitory effect is one of the fundamental challenges to its industrial production. The aim of this study was to systematically identify, in industrial medium and at a genomic scale, the Saccharomyces cerevisiae genes required for simultaneous and maximal tolerance to key inhibitors of lignocellulosic fermentations. Based on the screening of EUROSCARF haploid mutant collection, 242 and 216 determinants of tolerance to inhibitory compounds present in industrial wheat straw hydrolysate (WSH) and in inhibitor-supplemented synthetic hydrolysate were identified, respectively. Genes associated to vitamin metabolism, mitochondrial and peroxisomal functions, ribosome biogenesis and microtubule biogenesis and dynamics are among the newly found determinants of WSH resistance. Moreover, PRS3, VMA8, ERG2, RAV1 and RPB4 were confirmed as key genes on yeast tolerance and fermentation of industrial WSH.

Plasmid-mediate transfer of FLO1 into industrial Saccharomyces cerevisiae PE-2 strain creates a strain useful for repeat-batch fermentations involving flocculation-sedimentation.

The flocculation gene FLO1 was transferred into the robust industrial strain Saccharomyces cerevisiae PE-2 by the lithium acetate method. The recombinant strain showed a fermentation performance similar to that of the parental strain. In 10 repeat-batch cultivations in VHG medium with 345 g glucose/L and cell recycling by flocculation-sedimentation, an average final ethanol concentration of 142 g/L and an ethanol productivity of 2.86 g/L/h were achieved. Due to the flocculent nature of the recombinant strain it is possible to reduce the ethanol production cost because of lower centrifugation and distillation costs.