Françoise Laurans

Wood formation in Angiosperms

Wood formation is a complex biological process, involving five major developmental steps, including (1) cell division from a secondary meristem called the vascular cambium, (2) cell expansion (cell elongation and radial enlargement), (3) secondary cell wall deposition, (4) programmed cell death, and (5) heartwood formation. Thanks to the development of genomic studies in woody species, as well as genetic engineering, recent progress has been made in the understanding of the molecular mechanisms underlying wood formation. In this review, we will focus on two different aspects, the lignification process and the control of microfibril angle in the cell wall of wood fibres, as they are both key features of wood material properties.

Common trade‐offs between xylem resistance to cavitation and other physiological traits do not hold among unrelated Populus deltoides ×Populus nigra hybrids

We examined the relationships between xylem resistance to cavitation and 16 structural and functional traits across eight unrelated Populus deltoides x Populus nigra genotypes grown under two contrasting water regimes. The xylem water potential inducing 50% loss of hydraulic conductance (Psi(50)) varied from -1.60 to -2.40 MPa. Drought-acclimated trees displayed a safer xylem, although the extent of the response was largely genotype dependent, with Psi(50) being decreased by as far as 0.60 MPa. At the tissue level, there was no clear relationship between xylem safety and either xylem water transport efficiency or xylem biomechanics; the only structural trait to be strongly associated with Psi(50) was the double vessel wall thickness, genotypes exhibiting a thicker double wall being more resistant. At the leaf level, increased cavitation resistance was associated with decreased stomatal conductance, while no relationship could be identified with traits associated with carbon uptake or bulk leaf carbon isotope discrimination, a surrogate of intrinsic water-use efficiency. At the whole-plant level, increased safety was associated with higher shoot growth potential under well-irrigated regime only. We conclude that common trade-offs between xylem resistance to cavitation and other physiological traits that are observed across species may not necessarily hold true at narrower scales.

Xylem anatomy correlates with gas exchange, water-use efficiency and growth performance under contrasting water regimes: evidence from Populus deltoides × Populus nigra hybrids

Six Populus deltoides Bartr. ex Marsh. x P. nigra L. genotypes were selected to investigate whether stem xylem anatomy correlated with gas exchange rates, water-use efficiency (WUE) and growth performance. Clonal copies of the genotypes were grown in a two-plot common garden test under contrasting water regimes, with one plot maintained irrigated and the other one subjected to moderate summer water deficit. The six genotypes displayed a large range of xylem anatomy, mean vessel and fibre diameter varying from about 40 to 60 microm and from 7.5 to 10.5 microm, respectively. Decreased water availability resulted in a reduced cell size and an important rise in vessel density, but the extent of xylem plasticity was both genotype and trait dependent. Vessel diameter and theoretical xylem-specific hydraulic conductivity correlated positively with stomatal conductance, carbon isotope discrimination and growth performance-related traits and negatively with intrinsic WUE, especially under water deficit conditions. Vessel diameter and vessel density measured under water deficit conditions correlated with the relative losses in biomass production in response to water deprivation; this resulted from the fact that a more plastic xylem structure was generally accompanied by a larger loss in biomass production.

Lignification in poplar tension wood lignified cell wall layers.

The lignification process in poplar tension wood lignified cell wall layers, specifically the S(1) and S(2) layers and the compound middle lamella (CML), was analysed using ultraviolet (UV) and transmission electron microscopy (TEM). Variations in the thickness of the gelatinous layer (G-layer) were also measured to clarify whether the lignified cell wall layers had completed their lignification before the deposition of G-layers, or, on the contrary, if lignification of these layers was still active during G-layer formation. Observations using UV microscopy and TEM indicated that both UV absorbance and the degree of potassium permanganate staining increased in the CML and S(1) and S(2) layers during G-layer formation, suggesting that the lignification of these lignified layers is still in progress during G-layer formation. In the context of the cell-autonomous monolignol synthesis hypothesis, our observations suggest that monolignols must go through the developing G-layer during the lignification of CML and the S(1) and S(2) layers. The alternative hypothesis of external synthesis (in the rays) does not require that monolignols go through the G-layer before being deposited in the CML, or the S(1) and S(2) layers. Interestingly, the previous observation of lignin in the poplar G-layer was not confirmed with the microscopy techniques used in the present study.

Exceptional plant penetration and feeding upon cortical parenchyma cells by the woolly poplar aphid.

Forty percent of aphids live wholly or partly on trees, most species being associated with leaves or petioles. Species able to exploit woody parts have either specific adaptations, such as extra long stylets that allow them to reach the phloem, or the ability to induce galls. The woolly poplar aphid, Phloeomyzus passerinii (Signoret) (Hemiptera: Aphididae), colonizes the trunks and base of the lower branches of mature poplars and causes cortical necrosis leading to the death of trees where infestation is heavy. Very little is known about the mode of feeding of P. passerinii. This study looked at the feeding behavior of P. passerinii on stem-cuttings of Populus x canadensis Moench using: (i) histological analyses of the feeding site and stylet pathway and (ii) electrical penetration graphs (EPG, DC) based on parthenogenetic apterous females on woody tissues. The histological and EPG results showed that stylets of P. passerinii penetrated into the plant tissues following a straight unbranched extracellular and intracellular pathway to reach the cortical parenchyma. Compared to EPGs for phloem sap feeding aphids, there were differences in the waveforms A and C whereas a new waveform Icp was described. Based on histological analyses and previous descriptions of EPG waveforms, correlations with the stylet tip position and aphid activities within bark tissues are discussed. A pathway and a sustained intracellular phase were distinguished, both occurring in the cortical parenchyma cells. The bark aphid feeding mode is discussed in relation to the damage caused and in terms of changes in the aphids diet.

Stem xylem resistance to cavitation is related to xylem structure but not to growth and water-use efficiency at the within-population level in Populus nigra L.

Xylem resistance to drought-induced cavitation is a key trait of plant water relations. This study assesses the genetic variation expressed for stem cavitation resistance within a population of a riparian species, the European black poplar (Populus nigra L.), and explores its relationships with xylem anatomy, water-use efficiency (WUE), and growth. Sixteen structural and physiological traits related to cavitation resistance, xylem anatomy, growth, bud phenology, and WUE were measured on 33 P. nigra genotypes grown under optimal irrigation in a 2-year-old clonal experiment in a nursery. Significant genetic variation was expressed for the xylem tension inducing 50% loss of hydraulic conductivity (Ψ50) within the studied population, as attested by the high value of broad-sense heritability estimated for this trait (H (2) ind = 0.72). Stem cavitation resistance was associated with xylem structure: the more cavitation-resistant genotypes exhibited lower hydraulic efficiency and higher mechanical reinforcement as assessed from stem xylem cross sections. By contrast, Ψ50 was not significantly related to shoot height increment, total above-ground dry mass, or bulk leaf carbon isotope discrimination, a proxy for intrinsic WUE. These findings indicate that the trade-offs between xylem resistance to cavitation, hydraulic efficiency, and mechanical reinforcement can occur at the within-population level. Given that the studied genotypes were exposed to the same environmental conditions and evolutionary drivers in situ, the trade-offs detected at this scale are expected to reflect true functional relationships.

Resistant poplar genotypes inhibit pseudogall formation by the wooly poplar aphid, Phloeomyzus passerinii Sign

Key messagePhloeomyzus passeriniican induce a pseudogall within the bark of susceptible poplar genotypes, while in resistant genotypes the induction seems to be impeded by lignification processes.AbstractPhloeomyzus passerinii is a major pest of poplar stands in Europe, North Africa and the Near East. This aphid feeds in the cortical parenchyma of different poplar species and hybrids, and can affect their growth and survival through unknown mechanisms. In some genotypes, however, resistance prevents either the settlement or the development of aphid colonies. For a better understanding of tree reactions to aphid probing, we compared the anatomical and biochemical modifications undergone within the bark of stem cuttings, after different delays of either aphid colonization or mechanical wounding. To assess how resistance may modulate tree reactions, the comparison was performed using three poplar genotypes exhibiting different resistance levels. In these three genotypes, mechanical wounding induced a similar, localized, wound periderm. In contrast, aphid colonization triggered more extended reactions, which differed among genotypes. In the susceptible genotype, aphids induced a reaction tissue, characterized after a month by thin-walled hypertrophied cells and a depletion of soluble phenolic compounds and starch. Anatomical features of this reaction tissue suggest that the aphid initiates a pseudogall in the cortical tissues of its susceptible host. In the resistant genotypes, however, the differentiation of the reaction tissue was totally or partially inhibited, probably because of extended lignification processes. The implications of a pseudogall induction on susceptible hosts’ physiology, and the impact of lignification on aphid development and behavior, are discussed.

Different Routes for Conifer- and Sinapaldehyde and Higher Saccharification upon Deficiency in the Dehydrogenase CAD1

Down-regulation of CAD1 in poplar leads to different metabolic routes for coniferaldehyde and sinapaldehyde and alters lignin amount and structure, improving the physicochemical properties of wood for saccharification. In the search for renewable energy sources, genetic engineering is a promising strategy to improve plant cell wall composition for biofuel and bioproducts generation. Lignin is a major factor determining saccharification efficiency and, therefore, is a prime target to engineer. Here, lignin content and composition were modified in poplar (Populus tremula × Populus alba) by specifically down-regulating CINNAMYL ALCOHOL DEHYDROGENASE1 (CAD1) by a hairpin-RNA-mediated silencing approach, which resulted in only 5% residual CAD1 transcript abundance. These transgenic lines showed no biomass penalty despite a 10% reduction in Klason lignin content and severe shifts in lignin composition. Nuclear magnetic resonance spectroscopy and thioacidolysis revealed a strong increase (up to 20-fold) in sinapaldehyde incorporation into lignin, whereas coniferaldehyde was not increased markedly. Accordingly, ultra-high-performance liquid chromatography-mass spectrometry-based phenolic profiling revealed a more than 24,000-fold accumulation of a newly identified compound made from 8-8 coupling of two sinapaldehyde radicals. However, no additional cinnamaldehyde coupling products could be detected in the CAD1-deficient poplars. Instead, the transgenic lines accumulated a range of hydroxycinnamate-derived metabolites, of which the most prominent accumulation (over 8,500-fold) was observed for a compound that was identified by purification and nuclear magnetic resonance as syringyl lactic acid hexoside. Our data suggest that, upon down-regulation of CAD1, coniferaldehyde is converted into ferulic acid and derivatives, whereas sinapaldehyde is either oxidatively coupled into S′(8-8)S′ and lignin or converted to sinapic acid and derivatives. The most prominent sink of the increased flux to hydroxycinnamates is syringyl lactic acid hexoside. Furthermore, low-extent saccharification assays, under different pretreatment conditions, showed strongly increased glucose (up to +81%) and xylose (up to +153%) release, suggesting that down-regulating CAD1 is a promising strategy for improving lignocellulosic biomass for the sugar platform industry.

Cell wall thickening in developing tension wood of artificially bent poplar trees

Trees can control their shape and resist gravity thanks to their ability to produce wood under tensile stress. This stress is known to be produced during the maturation of wood fibres but the mechanism of its generation remains unclear. This study focuses on the formation of the secondary wall in tension wood produced in artificially tilted poplar saplings. Thickness of secondary wall layer (SL) and gelatinous layer (GL) were measured from cambium to mature wood in several trees sampled at different times after tilting. Measurements on wood fibres produced before tilting show the progressive increase of secondary wall thickness during the growing season. After the tilting date, SL thickness decreased markedly from normal wood to tension wood while the total thickness increased compared to normal wood, with the development of a thick GL. However, even after GL formation, SL thickness continues to increase during the growing season. GL thickening was observed to be faster than SL thickening. The development of the unlignified GL is proposed to be a low cost, efficient strategy for a fast generation of tensile stress in broadleaved trees.

Non-cellulosic polysaccharide distribution during G-layer formation in poplar tension wood fibers: abundance of rhamnogalacturonan I and arabinogalactan proteins but no evidence of xyloglucan

AbstractMain conclusionRG-I and AGP, but not XG, are associated to the building of the peculiar mechanical properties of tension wood. Hardwood trees produce tension wood (TW) with specific mechanical properties to cope with environmental cues. Poplar TW fibers have an additional cell wall layer, the G-layer responsible for TW mechanical properties. We investigated, in two poplar hybrid species, the molecules potentially involved in the building of TW mechanical properties. First, we evaluated the distribution of the different classes of non-cellulosic polysaccharides during xylem fiber differentiation, using immunolocalization. In parallel, G-layers were isolated and their polysaccharide composition determined. These complementary approaches provided information on the occurrence of non-cellulosic polysaccharides during G-fiber differentiation. We found no evidence of the presence of xyloglucan (XG) in poplar G-layers, whereas arabinogalactan proteins (AGP) and rhamnogalacturonan type I pectins (RG-I) were abundant, with an apparent progressive loss of RG-I side chains during G-layer maturation. Similarly, the intensity of immunolabeling signals specific for glucomannans and glucuronoxylans varies during G-layer maturation. RG-I and AGP are best candidate matrix components to be responsible for TW mechanical properties.