Frank A. Liporace

Results of Internal Fixation of Pauwels Type-3 Vertical Femoral Neck Fractures

BACKGROUND It has been postulated that femoral neck fractures with a more vertical fracture line (i.e., a high Pauwels angle) may experience more shear forces and therefore may be predisposed to nonunion or loss of fixation. Although there is controversy regarding which fixation method is ideal, we are aware of no large clinical series in which the treatment outcomes of these fractures were evaluated. The purpose of this multicenter study was to evaluate a large consecutive series of high shear angle (>70 degrees) femoral neck fractures to learn more about the outcomes, complications, and performance of various internal fixation strategies. METHODS Between January 1993 and January 2005, seventy-six Pauwels type-3 (Orthopaedic Trauma Association [OTA] type-31B2.3) femoral neck fractures were treated in seventy-five patients with a mean age of forty-two years. Fourteen patients were lost to follow-up. Sixty-two fractures in sixty-one patients were followed to union or revision surgery, with a mean duration of follow-up of twenty-four months. Thirty-seven fractures were treated with cannulated screws and twenty-five, with a fixed-angle device. The reduction quality, accuracy of implant placement, time to surgery, influence of capsular decompression, and rates of nonunion and osteonecrosis were evaluated. RESULTS Fifty-nine (95%) of the fractures had good-to-excellent reduction, and three had a fair reduction. There was a nonunion of eight (14%) of the fifty-nine fractures with a good-to-excellent reduction and two of the three with a fair reduction. There was a septic nonunion of one fracture treated with a dynamic hip screw. There was an aseptic nonunion of seven (19%) of the thirty-seven fractures treated with screw fixation alone as compared with two (8%) of the twenty-five fractures treated with a fixed-angle device. Osteonecrosis occurred after treatment of seven (11%) of the sixty-two fractures. CONCLUSIONS Despite timely, excellent reduction and accurate implant placement in the vast majority of cases, the nonunion rate was 19% for fractures treated with cannulated screws alone and 8% for those treated with a fixed-angle device. Although these failure rates are not significantly different, we believe that this study documents the challenging nature of this fracture pattern and the ideal fixation device remains undefined.

Distal radius fractures.

Distal radius fractures are a common injury, particularly in the elderly population. Severity of these fractures is directly related to the bone mineral density of the patient, and clinical results are dependent on this parameter as well. In terms of treatment, several options exist. Nonoperative management consists of closed treatment with casting. Operative treatment options include intrafocal pinning, nonbridging and bridging external fixation, arthroscopic-assisted external fixation, and various methods of open reduction internal fixation. When operative intervention is indicated, considerations include the characteristics of the fracture and the experience of the surgeon with the treatment modalities.

A biomechanical comparison of a dorsal 3.5-mm T-plate and a volar fixed-angle plate in a model of dorsally unstable distal radius fractures.

Objectives: To compare the biomechanical stability of internal fixation of extra-articular, dorsally unstable distal radius fractures fixed by 1 of 2 methods, either a standard dorsal nonlocked T-plate or a volar locked fixed-angle plate. Design: Biomechanical cadaveric study. Setting: Biomechanical testing laboratory. Intervention: In 6 matched pairs of fresh-frozen cadaveric specimens, a simulated unstable extra-articular distal radius fracture was created. The fractures were stabilized with either a dorsal 3.5-mm stainless steel T-plate or a titanium locked volar fixed-angle plate. Specimens were axially loaded at 5 points (centrally, volarly, dorsally, radially, and ulnarly) and then cyclically loaded for 5000 cycles with an 80 N central load. Postcyclical loading, specimens were once again axially loaded at the 5 points. Main Outcome Measures: Initial fixation stiffness and stiffness after midaxial cyclical loading was compared at the 5 points. Results: With the volar locked fixed-angle plate, fixation was significantly stiffer than with the dorsal nonlocked T-plate for ulnar and volar loading in single-cycle testing. After cyclic loading, the locked volar fixed-angle plate maintained more of its initial stiffness than the dorsal nonlocked T-plate. The dorsal 3.5-mm stainless steel T-plates stiffness when dorsally loaded significantly decreased after cyclical loading. Conclusions: The volar locked fixed-angle plate maintained a greater percentage of its initial stiffness after cyclic loading compared to the dorsal nonlocked plate. Also, the volar locked plate was stiffer than the dorsal nonlocked plate for all loading configurations tested except when subjected to a dorsally applied eccentric load.

Essential Nutrients for Bone Health and a Review of their Availability in the Average North American Diet

Osteoporosis and low bone mineral density affect millions of Americans. The majority of adults in North America have insufficient intake of vitamin D and calcium along with inadequate exercise. Physicians are aware that vitamin D, calcium and exercise are essential for maintenance of bone health. Physicians are less likely to be aware that dietary insufficiencies of magnesium, silicon, Vitamin K, and boron are also widely prevalent, and each of these essential nutrients is an important contributor to bone health. In addition, specific nutritional factors may improve calcium metabolism and bone formation. It is the authors’ opinion that nutritional supplements should attempt to provide ample, but not excessive, amounts of factors that are frequently insufficient in the typical American diet. In contrast to dietary insufficiencies, several nutrients that support bone health are readily available in the average American diet. These include zinc, manganese, and copper which may have adverse effects at higher levels of intake. Some multivitamins and bone support products provide additional quantities of nutrients that may be unnecessary or potentially harmful. The purpose of this paper is to identify specific nutritional components of bone health, the effects on bone, the level of availability in the average American diet, and the implications of supplementation for each nutritional component. A summary of recommended dietary supplementation is included.

Clamp-Assisted Reduction of High Subtrochanteric Fractures of the Femur

BACKGROUND Subtrochanteric fractures can be a treatment challenge. The substantial forces that this region experiences and the fact that the proximal fragment is frequently displaced make accurate reduction and internal fixation difficult. The purpose of this study was to evaluate a series of patients who had undergone clamp-assisted reduction and intramedullary nail fixation to determine the impact of this technique on fracture union rates and reduction quality. METHODS Between December 2003 and January 2007, fifty-five consecutive patients with a displaced high subtrochanteric femoral fracture were treated with clamp-assisted reduction and intramedullary nail fixation at two level-I trauma centers. Two patients died, and nine were lost to follow-up. The remaining forty-four patients were followed until union or a minimum of six months. There were twenty-seven male and seventeen female patients with a mean age of fifty-five years. All were treated with an antegrade statically locked nail implanted with a reaming technique as well as the assistance of a reduction clamp placed through a small lateral incision. Nine patients were treated with a single supplemental cerclage cable. Radiographs were evaluated for the quality of the reduction and fracture union. RESULTS Forty-three of the forty-four fractures united. All reductions were within 5 degrees of the anatomic position in both the frontal and the sagittal plane. Thirty-eight (86%) of the forty-four reductions were anatomic. Six fractures had a minor varus deformity of the proximal fragment (between 2 degrees and 5 degrees ). There were no complications. DISCUSSION Surgical treatment of subtrochanteric femoral fractures with clamp-assisted reduction and intramedullary nail fixation techniques with judicious use of a cerclage cable can result in excellent reductions and a high union rate. Careful attention to detail is important to perform these maneuvers with minimal additional soft-tissue disruption.

Functional outcome following one-part proximal humeral fractures: A prospective study

A prospective study was undertaken to determine if patients recover pre-injury level of shoulder function 1 year after 1 part proximal humeral fractures. Of the 67 patients enrolled, 43 were female and 24 male with an average age of 64.8 years (range, 25-90 years). All patients underwent a similar treatment protocol consisting of early therapy for range of shoulder motion and strengthening. Baseline demographics and functional assessment, including the American Shoulder and Elbow Surgeons (ASES) evaluation form and the SF-36, were obtained at the time of injury. Functional and demographic data were evaluated with a Students t test. Fifty-four patients (80%) completed a 1-year follow-up. By 3 months, all patients attained radiographic and clinical evidence of union and no loss of reduction. At 1 year, the ASES score was similar to pre-injury status (93.7 vs 99.1; P = .12). The range of shoulder motion of the affected side was diminished compared to the unaffected extremity in internal rotation (P < .001) and external rotation (P < .001) but not forward flexion. Patients, who sustain minimally displaced proximal humeral fractures treated nonoperatively, largely returned to preoperative functional status at 1-year follow-up. Patients should be counseled and made aware of the decreased range of shoulder motion following this fracture.

Decisions and staging leading to definitive open management of pilon fractures: where have we come from and where are we now?

UNLABELLED Historically, the treatment and outcomes related to pilon fractures have been variable despite anatomical reduction and fixation. However, with the advent of newer implant technologies, improved surgical techniques, and the management via a staged protocol, results have indicated encouraging clinical outcomes with minimization of postoperative complications. This review focuses and outlines the current strategies, decision-making processes, and definitive treatment options regarding the notoriously difficult to treat pilon fracture. LEVEL OF EVIDENCE Therapeutic Level V. See Instructions for Authors for a complete description of levels of evidence.

Clamp-Assisted Reduction of High Subtrochanteric Fractures of the Femur: Surgical Technique

BACKGROUND Subtrochanteric fractures can be a treatment challenge. The substantial forces that this region experiences and the fact that the proximal fragment is frequently displaced make accurate reduction and internal fixation difficult. The purpose of this study was to evaluate a series of patients who had undergone clamp-assisted reduction and intramedullary nail fixation to determine the impact of this technique on fracture union rates and reduction quality. METHODS Between December 2003 and January 2007, fifty-five consecutive patients with a displaced high subtrochanteric femoral fracture were treated with clamp-assisted reduction and intramedullary nail fixation at two level-I trauma centers. Two patients died, and nine were lost to follow-up. The remaining forty-four patients were followed until union or a minimum of six months. There were twenty-seven male and seventeen female patients with a mean age of fifty-five years. All were treated with an antegrade statically locked nail implanted with a reaming technique as well as the assistance of a reduction clamp placed through a small lateral incision. Nine patients were treated with a single supplemental cerclage cable. Radiographs were evaluated for the quality of the reduction and fracture union. RESULTS Forty-three of the forty-four fractures united. All reductions were within 5° of the anatomic position in both the frontal and the sagittal plane. Thirty-eight (86%) of the forty-four reductions were anatomic. Six fractures had a minor varus deformity of the proximal fragment (between 2° and 5°). There were no complications. DISCUSSION Surgical treatment of subtrochanteric femoral fractures with clamp-assisted reduction and intramedullary nail fixation techniques with judicious use of a cerclage cable can result in excellent reductions and a high union rate. Careful attention to detail is important to perform these maneuvers with minimal additional soft-tissue disruption.

Evolution and Development of the Advanced Trauma Life Support (ATLS) Protocol: A Historical Perspective

The Advanced Trauma Life Support (ATLS) protocol is a successful course offered by the American College of Surgeons. Once based on didactic lectures and seminars taught by experts in the field, trauma training has evolved to become a set of standardized assessment and treatment protocols based on evidence rather than expert opinion. As the ATLS expands, indices to predict outcome, morbidity, and mortality have evolved to guide management and treatment based on retrospective data. This historical, perspective article attempts to tell the story of ATLS from its inception to its evolution as an international standard for the initial assessment and management of trauma patients.

Anteroinferior 2.7-mm versus 3.5-mm plating for AO/OTA type B clavicle fractures: a comparative cohort clinical outcomes study.

Objectives: To compare the Disability of the Arm, Shoulder, and Hand (DASH) and Constant scores, time to union, rate of union, patient cosmetic satisfaction rate, and the need for secondary procedures between 2.7- and 3.5-mm anteroinferior plating for Arbeitsgemeinschaft für Osteosynthesefragen (AO)/Orthopaedic Trauma Association (OTA) type B clavicle fractures. Design: Retrospective, comparative cohort clinical outcomes study. Setting: Level I university trauma center. Patients/Participation: Thirty-seven patients with an AO/OTA type B clavicle fracture who underwent open reduction internal fixation with either a 2.7- or 3.5-mm reconstruction plate placed in the anterior–inferior position. The main outcome comparisons included DASH score, Constant score, time to union, rate of union, rate of hardware failure, cosmetic satisfaction, and secondary procedure. Main Outcome Measurement: DASH score, constant score, time to union, rate of union, cosmetic satisfaction, secondary procedure. Results: At 1-year follow-up, analysis yielded no significant differences in DASH scores (P = 0.26) and Constant Shoulder scores (P = 0.79) between the 2 cohorts. There were no statistically significant differences in the time to union (P = 0.86) and the rate of union (P = 0.49). Although the 2.7-mm cohort had a lower reoperation rate, it was not statistically significant (P = 0.11). However, the 2.7-mm cohort did demonstrate a significantly higher rate of cosmetically acceptable reconstruction (P = 0.003). Conclusions: Compared with 3.5-mm anterior–inferior plating, 2.7-mm anteroinferior plating for AO/OTA type B clavicle fractures leads to significantly higher rates of cosmetic acceptability while reducing the need for a secondary procedure and achieving excellent clinical outcomes as measured by the DASH and Constant scores. There were no differences between the 2.7 and 3.5 cohorts in time to union or in union rate. Level of Evidence: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.