Frank Stephan

Disk Yb:KGW amplifier of profiled pulses of laser driver for electron photoinjector.

We investigated a diode-pumped multipass disk Yb:KGW amplifier intended for amplifying a train of 3D ellipsoidal pulses of a laser driver for a photocathode of a linear electron accelerator. The multipass amplification geometry permitted increasing the energy of broadband (about 10 nm) pulses with a repetition rate of 1 MHz from 0.12 µJ to 39 µJ, despite large losses (two orders of magnitude) introduced by a beam shaper of 3D ellipsoidal beam. The distortions of the pulse train envelope were minimal due to optimal delay between the moment of pump switching on and arrival of the first pulse of the train.

Generation of 3D ellipsoidal laser beams by means of a profiled volume chirped Bragg grating

A method for shaping photocathode laser driver pulses into 3D ellipsoidal form has been proposed and implemented. The key idea of the method is to use a chirped Bragg grating recorded within the ellipsoid volume and absent outside it. If a beam with a constant (within the grating reflection band) spectral density and uniform (within the grating aperture) cross-section is incident on such a grating, the reflected beam will be a 3D ellipsoid in space and time. 3D ellipsoidal beams were obtained in experiment for the first time. It is expected that such laser beams will allow the electron bunch emittance to be reduced when applied at R± photo injectors.

Generation of quasi continuous-wave electron beams in an L-band normal conducting pulsed RF injector for laboratory astrophysics experiments

Abstract We report on an approach to produce quasi continuous-wave (cw) electron beams with an average beam current of milliamperes and a mean beam energy of a few MeV in a pulsed RF injector. Potential applications are in the planned laboratory astrophysics programs at DESY. The beam generation is based on field emission from a specially designed metallic field emitter. A quasi cw beam profile is formed over subsequent RF cycles at the resonance frequency of the gun cavity. This is realized by debunching in a cut disk structure accelerating cavity (booster) downstream of the gun. The peak and average beam currents can be tuned in beam dynamics simulations by adjusting operation conditions of the booster cavity. Optimization of the transverse beam size at specific positions (e.g., entrance of the plasma experiment) is performed by applying magnetic focusing fields provided by solenoids along the beam line. In this paper, the design of a microtip field emitter is introduced and characterized in electromagnetic field simulations in the gun cavity. A series of particle tracking simulations are conducted for multi-parametric optimization of the parameters of the produced quasi cw electron beams. The obtained results will be presented and discussed. In addition, measurements of the parasitic field emission (PFE) current (dark current) in the PITZ gun will be exemplarily shown to distinguish its order of magnitude from the produced beam current by the designed field emitter.

3D ellipsoidal beam shaping in laser drivers for photoinjectors

Ellipsoidal laser pulses with central wavelength of 1030 nm and duration of 40 ps were obtained. It is expected that after conversion into the fourth harmonic this will reduce appreciably emittance of the electron beam, injected by the laser.