Frank Vriesekoop

Effects of nisin on the antimicrobial activity of d-limonene and its nanoemulsion

d-Limonene has been considered to be a safer alternative compared to synthetic antimicrobial food additives. However, its hydrophobic and oxidative nature has limited its application in foods. The purpose of this research was to study effects of nisin on the antimicrobial activity of d-limonene and its nanoemulsion and develop a novel antimicrobial delivery system by combining the positive effect of these two antibacterial agents at the same time. By the checkerboard method, both the synergistic and additive effects of d-limonene and nisin were found against four selected food-related microorganisms. Then, d-limonene nanoemulsion with or without nisin was prepared by catastrophic phase inversion method, which has shown good droplet size and stability. The positive effects and outstanding antimicrobial activity of d-limonene nanoemulsion with nisin were confirmed by MICs comparison, scanning electron microscopy and determination of cell constituents released. Overall, the research described in the current article would be helpful in developing a more effective antimicrobial system for the production and preservation of foods.

Preparation and stabilization of D-limonene Pickering emulsions by cellulose nanocrystals.

The aim of this study was to investigate D-limonene Pickering emulsion stabilized by cellulose nanocrystals (CNCs) and factors that may affect its properties. CNCs were prepared by ammonium persulfate hydrolysis of corncob cellulose, and D-limonene Pickering emulsions were generated by ultrasonic homogenizing method. The morphology and size of the prepared emulsions with different CNCs concentrations were studied by optical microscopy and laser light diffraction. In addition, factors that may affect the stability of emulsions such as ionic concentration, pH and temperature were also studied. As indicated by the experiment data, when temperature rose, the stability to of emulsions would be increased, and the stability of emulsions was reduced with low pH or high salt concentration due to electrostatic screening of the negatively charged CNC particles. In conclusion, high stability of D-limonene Pickering emulsions could be obtained by CNCs.

Effects of cyclodextrins on the antimicrobial activity of plant-derived essential oil compounds

Essential oils (EOs) from plants are considered to be a safer alternative when compared to synthetic antimicrobial food additives. However, a major drawback of many EOs is their hydrophobic nature, which makes them insoluble in water based media and matrices. Although cyclodextrins (CDs) can increase the solubility of EO compounds, the effects of CDs on the antimicrobial activity of EOs have not been reported. In this paper, four different EO compounds (carvacrol, eugenol, linalool and 2-pentanoylfuran) were chosen to study the influence of CDs on the solubility and antimicrobial activity on bacteria and yeast. The greatest enhancement with regards to solubility of the four test compounds was achieved by hydroxypropyl-β-CD. In most instances, not only were the minimal antimicrobial concentrations of EO compounds decreased, but the interactivity of two combined EO compounds could be strengthened by the co-addition of CDs. Furthermore, the combination of carvacrol with hydroxypropyl-β-CD caused a marked change in the major membrane lipid composition of all microorganisms investigated; while scanning electron microscopy revealed that cellular integrity was significantly affected by 2× MIC, ultimately resulting in cell lysis.

Physical and chemical changes during the maturation of Gordal Sevillana olives ( Olea europaea L., cv. Gordal Sevillana).

A series of physical and chemical changes occur as olives mature on the tree, and these changes are important for the production of oil and table olives. The aim of this study was to increase the understanding of the maturation process of Gordal Sevillana olives, to optimize harvest timing, and to determine the most appropriate harvesting and post-harvesting processing methods. During maturation, the olive size, flesh/pit ratio, and oil content increased, with a maximum oil content of 72 g kg(-1) (wet weight). Changes in the fatty acid composition are reported. Levels of both total sugars and total phenolic compounds slightly decreased over the maturation period; however, we observed that these compounds were continually being synthesized until full black maturity. The optimal harvest time for the production of Gordal Sevillana as Spanish-style green olives occurred immediately prior to the color change from green to turning color, at which point the sugar levels and flesh/pit ratio were at maximum levels.

Effects of acetaldehyde on Saccharomyces cerevisiae exposed to a range of chemical and environmental stresses

The ability of small quantities of added acetaldehyde to stimulate growth in environmentally-stressed cultures of Saccharomyces cerevisiae was examined over a broad range of stress conditions. Acetaldehyde addition substantially reduced the lag phase of cultures suddenly inoculated into medium containing inhibitory quantities of low M.W. alcohols and higher fatty acids. For ethanol-stressed cultures, acetaldehyde was effective whether added initially or during fermentation. The effects of acetaldehyde were not universal, only minor stimulation being observed for cultures exposed to heat shock, or experiencing changes in cultivation temperature or pH, despite the occurrence of long lag phases under these conditions. Acetaldehyde strongly inhibited the growth of osmotically-shocked cultures, in contrast to the effects of small quantities of ethanol. The beneficial effects of acetaldehyde appear to be largely confined to cultures exposed to chemical stress especially by agents which disturb membrane structure or function. Acetaldehyde addition has potential practical application in overcoming inhibition in such fermentations.

Draft Genome Sequence of Clostridium sporogenes PA 3679, the Common Nontoxigenic Surrogate for Proteolytic Clostridium botulinum

Clostridium sporogenes PA 3679 is widely used as a nontoxigenic surrogate for proteolytic strains of Clostridium botulinum in the derivation and validation of thermal processes in food. Here we report the draft assembly and annotation of the C. sporogenes PA 3679 genome. Preliminary analysis demonstrates a high degree of relatedness between C. sporogenes PA 3679 and sequenced strains of proteolytic C. botulinum.

The role of acetaldehyde and glycerol in the adaptation to ethanol stress of Saccharomyces cerevisiae and other yeasts

Ethanol inhibition is a commonly encountered stress condition during typical yeast fermentations and often results in reduced fermentation rates and production yields. While past studies have shown that acetaldehyde addition has a significant ameliorating effect on the growth of ethanol-stressed Saccharomyces cerevisiae, this study investigated the potential ameliorating effect of acetaldehyde on a wide range of ethanol-stressed yeasts. Acetaldehyde does not appear to be a universal ameliorating agent for yeasts exposed to ethanol stress. It is also shown that as a result of an ethanol stress, most yeasts rapidly produce glycerol as an alternative means of NAD(+) regeneration rather than having a specific requirement for glycerol. The results strongly suggest that both ethanol and acetaldehyde exposure have a direct effect on the cellular NAD(+)/NADH ratio, which can manifest itself as modulations in glycerol production.

Application of High-Speed Countercurrent Chromatography for the Isolation of Sulforaphane from Broccoli Seed Meal

In order to produce large amounts of pure sulforaphane for research purposes, a novel method using high-speed countercurrent chromatography (HSCCC) was developed. Without any initial cleanup steps, sulforaphane was successfully purified from the ethyl acetate extract of the broccoli seed meal by HSCCC. The separation was performed with two-phase solvent systems: n-hexane/ethyl acetate/methanol/water (1:5:1:5, v/v/v/v). From 850 mg of the ethyl acetate extract, 186 mg of sulforaphane was isolated with the solvent system. The purified compound was over 97% purity as determined by HPLC analysis, and the chemical structure was confirmed by MS and (1)H and (13)C NMR.

The quantitative analysis of thiamin and riboflavin and their respective vitamers in fermented alcoholic beverages.

This research aimed to develop a simple and effective method for analyzing thiamin (B(1)), riboflavin (B(2)) and their respective vitamers by high performance liquid chromatography (HPLC) in fermented alcoholic beverages. The method developed here employs a phosphate buffer/methanol gradient elution on a single reverse phase column, coupled with independent fluorescent detection regimes. It also employs a precolumn derivatization to convert thiamin to thiochrome via an alkaline potassium ferricyanide solution. The method described here allowed a spike recovery of better than 97%, with a typical linear detection range (R(2) ≥ 0.9997) between ≤ 5 and ≥ 500 μg/L for all vitamers studied. Lager style beers were found to contain significantly (p < 0.001) less thiamin than other tested styles of beers (lager, 35.7 μg/L; ale, 88.3 μg/L; stout/porters, 104.4 μg/L; wheat beers, 130.7 μg/L), which may be due to the raw material and extensive processing that occurs for this style. There was no statistical difference (p = 0.608) between the riboflavin content of each beer style. Furthermore, wines and ciders contain less thiamin and riboflavin than beer, which is also likely to be due to the base materials used and the differences in processing steps to produce these beverages.

Acetaldehyde addition and pre-adaptation to the stressor together virtually eliminate the ethanol-induced lag phase in Saccharomyces cerevisiae

Aims:  To show that the ethanol‐induced lag phase in yeast can be almost eliminated by combining pre‐adaptation with acetaldehyde supplementation.