Fraser Walker

How accurate is model planning for orthognathic surgery

The purpose of this study was to evaluate the accuracy of model surgery prediction after orthognathic surgery and to identify possible errors associated with the prediction process. The study included 46 patients who had undergone orthognathic surgical procedures; 22 in Group A who had had a Le Fort I osteotomy; and 24 in Group B who had had a Le Fort I osteotomy and mandibular setback surgery. The immediate postoperative and preoperative lateral cephalograms were analysed to calculate surgical changes; these were compared with those obtained from model surgery prediction and a statistical analysis was undertaken. The maxilla was more under-advanced and over-impacted anteriorly than predicted by model surgery. The amount of mandibular setback was more than that predicted by model surgery. None of the differences between prediction planning and actual surgical changes was statistically significant at p<0.05. Inaccuracy with the face bow recording, the intermediate wafer, and auto-rotation of the mandible in the supine or anaesthetized patient would appear to be the principal reasons for errors. Inaccuracies are associated with the transfer of prediction planning to model surgery planning and prediction, which should be eliminated to improve the accuracy and predictability of orthognathic surgery.

Face bow and articulator for planning orthognathic surgery: 1 face bow

Orthognathic surgery that involves movement of the maxilla relative to the skull is usually planned using casts mounted on an articulator. Accurate positioning of the maxilla relative to the skull is essential for reliable planning, but current methods of mounting casts on articulators are inaccurate and unreliable. We propose that the casts should be mounted using the relation between the horizontal plane and the resting head position to define the position of the skull. A photographic study of 10 subjects confirmed the reproducibility of the head position and its relation to the horizontal plane. A face bow incorporating a circular spirit level was used to transfer the relation between the horizontal and the maxillary dentition to a semiadjustable articulator. The angle between the horizontal and maxillary occlusal planes was measured from six lateral cephalograms and compared with those of casts mounted on a semiadjustable articulator using a face bow with either an orbital pointer or a spirit level. The face bow with a spirit level produced considerably more accurate results.

Face bow and articulator for planning orthognathic surgery: 2 articulator

Patients who require orthognathic surgery may have asymmetry of the position of the temporomandibular joints relative to the maxilla, which is impossible to reproduce on the current semiadjustable articulators used for surgical planning. We describe a highly-adjustable spirit level orthognathic face bow that allows records to be made of patients with asymmetrical maxillae. The orthognathic articulator also allows the position of the condylar components of the articulator to be adjusted in three dimensions. The use of the new face bow and articulator made it possible to mount the dental casts of asymmetrical faces to reproduce their clinical appearance. The devices were evaluated by comparing the measurements of anatomical variables obtained from cephalometric radiographs with equivalent values obtained from the orthognathic articulator and casts mounted on the articulator. Although the measurements showed significant intersubject variability, the angle between the horizontal and maxillary occlusal plane, occlusal cant angle, and intercondylar widths, were not significantly different.

An assessment of the quality of care provided to orthognathic surgery patients through a multidisciplinary clinic

The quality of care delivered to 74 patients undergoing orthognathic surgery was assessed using a patient satisfaction questionnaire and data collected from hospital case records. Surgical complications, hospital services, patient satisfaction, and impact on quality of life, were the main aspects considered. The majority of patients reported that their treatment objectives had been achieved and that they were satisfied with the quality of care provided. The main concern of the patients regarding the clinic was the waiting time before an appointment could be offered. Eating and breathing difficulties and low mood after surgery were the main reported complications. Sixty-three patients experienced post-operative weight loss. The importance of a nutritious, high calorie soft diet should be emphasised and the use of menthol inhalations following maxillary osteotomies should be considered more frequently. Clinicians should be aware of post-operative low mood, which may require psychological support. We developed a sensitive assessment battery with comprehensive parameters to audit quality of orthognathic surgery service, and recommend that a similar approach should be considered by teams which undertake management of orthognathic patients.

Evaluation of an improved orthognathic articulator system: 1. Accuracy of cast orientation.

A systematic study was carried out using plastic model skulls to quantify the accuracy of the transfer of face bow registration to the articulator. A standard Dentatus semi-adjustable articulator system was compared to a purpose built orthognathic articulator system by measuring the maxillary occlusal plane angles of plastic model skulls and of dental casts mounted on the two different types of articulators. There was a statistically significant difference between the two systems; the orthognathic system showed small random errors, but the standard system showed systematic errors of up to 28°.

Validation of a new method for building a three-dimensional physical model of the skull and dentition

We present a new method for replicating the skull and occlusal surface with an accurate physical model that could be used for planning orthognathic surgery. The investigation was made on 6 human skulls, and a polyvinyl splint was fabricated on the dental cast of the maxillary dentition in each case. A cone beam computed tomogram (CBCT) was taken of each skull and a three-dimensional replica produced. The distorted dentition (as a result of magnification errors and streak artefacts) was removed from the three-dimensional model and replaced by new plaster dentition that was fabricated using the polyvinyl splint and a transfer jig replication technique. To verify the accuracy of the method the human skulls and the three dimensional replica model, with the new plaster dentition in situ, were scanned using a laser scanner. The three-dimensional images produced were superimposed to identify the errors associated with the replacement of the distorted occlusal surface with the new plaster dentition. The overall mean error was 0.72 and SD was (0.26)mm. The accuracy of the method encouraged us to use it clinically in a case of pronounced facial asymmetry.

Evaluation of an improved orthognathic articulator system. 2. Accuracy of occlusal wafers

The errors produced by occlusal wafers constructed on casts of the teeth mounted on a standard articulator and an improved orthognathic articulator were investigated by carrying out simulated orthognathic surgery on plastic skulls. The wafers were used to relocate the position of the maxillae of the skulls. The vertical and horizontal displacements of the maxillae were determined from measurements of the positions of markers on the skull and teeth. Comparison of the magnitudes of the actual and intended movements showed that wafers constructed on the standard articulator had systematic prediction errors of up to 5mm, but the improved orthognathic articulator showed much smaller random errors. There was a statistically significant improvement in overall accuracy in predicting maxillary Le Fort I position with the use of the improved orthognathic articulator which the authors recommend for clinical use.

Three-part mould technique for fabrication of hollow thumb prosthesis: A case report

Background: The purpose of this article is to describe a technique which helps in fabrication of glove-type hollow thumb prosthesis using three-part mould technique. Case description and methods: Patient reported to the Department of Private dental clinic, Delhi, India with a chief complaint of missing partial left thumb and wanted to get it replaced. A complete clinical hand examination was carried out, which revealed a residual stump of 1 cm length. After ensuring the medical conditions to be normal, fabrication of hollow thumb prosthesis was planned using three-part mould technique. Findings and outcomes: The prosthesis delivered to the patient was highly retentive because of its glove-type retention and lighter weight; feedback from the patient regarding retention was excellent. The prosthesis was aesthetically pleasing because of its excellent colour matching with the skin, and each and every part of the prosthesis could be colour customized because of easy retrieval of the third part of the mould, as well. Conclusion: A technique of hollow thumb prosthesis has been described in this article which helps in reduction in weight, easy packing of silicone material into the mould and easy colour customization at the knuckles area of the dorsal and ventral aspect of the prosthesis. Clinical relevance This three-part mould technique helps to fabricate hollow prosthesis which increases retainability and at the same time allows easy packing of silicone material and easy colour customization at the knuckles area of the prosthesis.