Frédéric Dumur

Metal and metal-free photocatalysts: mechanistic approach and application as photoinitiators of photopolymerization

Summary In the present paper, the photoredox catalysis is presented as a unique approach in the field of photoinitiators of polymerization. The principal photocatalysts already reported as well as the typical oxidation and reduction agents used in both reductive or oxidative cycles are gathered. The chemical mechanisms associated with various systems are also given. As compared to classical iridium-based photocatalysts which are mainly active upon blue light irradiation, a new photocatalyst Ir(piq)2(tmd) (also known as bis(1-phenylisoquinolinato-N,C 2’)iridium(2,2,6,6-tetramethyl-3,5-heptanedionate) is also proposed as an example of green light photocatalyst (toward the long wavelength irradiation). The chemical mechanisms associated with Ir(piq)2(tmd) are investigated by ESR spin-trapping, laser flash photolysis, steady state photolysis, cyclic voltammetry and luminescence experiments.

Electrochemical, linear optical, and nonlinear optical properties and interpretation by density functional theory calculations of (4-N,N-dimethylaminostyryl)-pyridinium pendant group associated with polypyridinic ligands and respective multifunctional metal complexes (Ru(II) or Zn(II)).

The synthesis, linear optical and nonlinear optical properties, as well as the electrochemical behavior of a series of pro-ligands containing the 4-(4-N,N-dimethylaminostyryl)-1-methyl pyridinium (DASP(+)) group as a push-pull moiety covalently linked to terpyridine or bipyridine as chelating ligands are reported in this full paper. The corresponding multifunctional Ru(II) and Zn(II) complexes were prepared and investigated. The structural, electronic, and optical properties of the pro-ligands and the ruthenium complexes were investigated using density functional theory (DFT) and time-dependent (TD) DFT calculations. A fairly good agreement was observed between the experimental and the calculated electronic spectra of the pro-ligands and their corresponding ruthenium complexes. A quenching of luminescence was evidenced in all ruthenium complexes compared with the free pro-ligands but even the terpyridine-functionalized metal complexes exhibited detectable luminescence at room temperature. Second order nonlinear optical (NLO) measurements were performed by Harmonic Light Scattering and the contribution of the DASP(+) moieties (and their relative ordering) and the metal-polypyridyl core need to be considered to explain the nonlinear optical properties of the metal complexes.

Tunable Optical Properties of Chromophores Derived from Oligo(p-phenylene vinylene)

A series of 11 symmetric push-pull chromophores consisting of electron-accepting groups connected through a central pi-conjugated system derived from oligo(p-phenylene vinylene) (OPV) were designed and synthesized. Electronic and spectroscopic properties were investigated by UV-visible absorption, fluorescence spectroscopy, and cyclic voltammetry. By finely tuning the electron-withdrawing ability of the acceptors as well as the length of the pi-conjugated spacer, a wide range of dyes exhibiting strong absorption and emission were obtained.

Organic Electronics: An El Dorado in the Quest of New Photocatalysts for Polymerization Reactions

Photoinitiated polymerization has been the subject of continued research efforts due to the numerous applications in which this polymerization technique is involved (coatings, inks, adhesives, optoelectronic, laser imaging, stereolithography, nanotechnology, etc.). More recently, photopolymerization has received renewed interest due to the emergence of 3D-printing technologies. However, despite current academic and industrial interest in photopolymerization methodologies, a major limitation lies in the slow rates of photopolymerization. The development of new photoinitiating systems aimed at addressing this limitation is an active area of research. Photopolymerization occurs through the exposure of a curable formulation to light, generating radical and/or cationic species to initiate polymerization. At present, photopolymerization is facing numerous challenges related to safety, economic and ecological concerns. Furthermore, practical considerations such as the curing depth and the competition for light absorption between the chromophores and other species in the formulation are key parameters drastically affecting the photopolymerization process. To address these issues, photoinitiating systems operating under low intensity visible light irradiation, in the absence of solvents are highly sought after. In this context, the use of photoredox catalysis can be highly advantageous; that is, photoredox catalysts can provide high reactivities with low catalyst loading, permitting access to high performance photoinitiating systems. However, to act as efficient photoredox catalysts, specific criteria have to be fulfilled. A strong absorption over the visible range, an ability to easily oxidize or reduce as well as sufficient photochemical stability are basic prerequisites to make these molecules desirable candidates for photoredox catalysis. Considering the similarity of requirements between organic electronics and photopolymerization, numerous materials initially designed for applications in organic electronics have been revisited in the context of photopolymerization. Organic electronics is a branch of electronics and materials science focusing on the development of semiconductors devoted to three main research fields; organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic solar cells (OSCs). The contribution of organic electronics to the field of electronics is important as it paves the way toward cheaper, lighter, and more energy efficient devices. In the present context of photopolymerization, materials that were investigated as photocatalysts were indifferently organic semiconductors used for transistors, charge-transport materials, and light-emitting materials used in electroluminescent devices or conjugated polymers and small molecule dyes for solar cells. In this Account, we summarize our latest developments in elaborating on photocatalytic systems based on these new classes of compounds. Through an in-depth understanding of the parameters governing their reactivities and our efforts to incorporate these materials into photoinitiating systems, we provide new knowledge and a valuable insight for future prospects.

New core-pyrene π structure organophotocatalysts usable as highly efficient photoinitiators

Summary Eleven di- and trifunctional compounds based on a core-pyrene π structure (Co_Py) were synthesized and investigated for the formation of free radicals. The application of two- and three-component photoinitiating systems (different Co_Pys with the addition of iodonium or sulfonium salts, alkyl halide or amine) was investigated in detail for cationic and radical photopolymerization reactions under near-UV–vis light. The proposed compounds can behave as new photocatalysts. Successful results in terms of rates of polymerization and final conversions were obtained. The strong MO coupling between the six different cores and the pyrene moiety was studied by DFT calculations. The different chemical intermediates are characterized by ESR and laser flash photolysis experiments. The mechanisms involved in the initiation step are discussed, and relationships between the core structure, the Co_Py absorption property, and the polymerization ability are tentatively proposed.

Novel Carbazole Skeleton-Based Photoinitiators for LED Polymerization and LED Projector 3D Printing

Radical chemistry is a very convenient way to produce polymer materials. Here, an application of a particular photoinduced radical chemistry is illustrated. Seven new carbazole derivatives Cd1–Cd7 are incorporated and proposed as high performance near-UV photoinitiators for both the free radical polymerization (FRP) of (meth)acrylates and the cationic polymerization (CP) of epoxides utilizing Light Emitting Diodes LEDs @405 nm. Excellent polymerization-initiating abilities are found and high final reactive function conversions are obtained. Interestingly, these new derivatives display much better near-UV polymerization-initiating abilities compared to a reference UV absorbing carbazole (CARET 9H-carbazole-9-ethanol) demonstrating that the new substituents have good ability to red shift the absorption of the proposed photoinitiators. All the more strikingly, in combination with iodonium salt, Cd1–Cd7 are likewise preferred as cationic photoinitiators over the notable photoinitiator bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide (BAPO) for mild irradiation conditions featuring their remarkable reactivity. In particular their utilization in the preparation of new cationic resins for LED projector 3D printing is envisioned. A full picture of the included photochemical mechanisms is given.

3-Hydroxyflavone and N-phenylglycine in High Performance Photoinitiating Systems for 3D Printing and Photocomposites Synthesis

In this work, we propose to use 3-hydroxyflavone as a versatile high performance visible light photoinitiator (PIs) in combination with an amino acid (N-phenylglycine) for the free radical polymerization (FRP) of methacrylates in thick samples or composites upon visible light exposure (Light-Emitting Diode LED@405 nm or LED@477 nm). The high originality of this approach is the use of safer compounds in photoinitiating systems (flavone derivative/amino acid). 3-Hydroxyflavone can also be used in three-component systems with an iodonium salt and an amine for the cationic polymerization of epoxides upon exposure to near UV light LED@385 nm. Also interestingly, a charge transfer complex CTC between N-phenylglycine NPG and iodonium salt gives also remarkable initiating performance for free radical polymerization of methacrylates upon mild light irradiation conditions (LED@405 nm). High polymerization initiating abilities are found and high final reactive function conversions are obtained. The use of the new proposed initiating systems as materials for laser write or 3D printing experiments was also especially carried out with the formation of printed green fluorescent photopolymers. This green fluorescence obtained with naturally occurring 3-hydroxyflavone compound can be ascribed to the excited state intramolecular proton transfer ESIPT character. A full picture of the included photochemical mechanisms is given. Remarkably, 3-hydroxyflavone is also very efficient for photocomposites synthesis with glass fibers (thick samples with good depth of cure) using UV or LED@395 nm conveyor.