Friedrich Fauser

Both CRISPR/Cas-based nucleases and nickases can be used efficiently for genome engineering in Arabidopsis thaliana

Engineered nucleases can be used to induce site-specific double-strand breaks (DSBs) in plant genomes. Thus, homologous recombination (HR) can be enhanced and targeted mutagenesis can be achieved by error-prone non-homologous end-joining (NHEJ). Recently, the bacterial CRISPR/Cas9 system was used for DSB induction in plants to promote HR and NHEJ. Cas9 can also be engineered to work as a nickase inducing single-strand breaks (SSBs). Here we show that only the nuclease but not the nickase is an efficient tool for NHEJ-mediated mutagenesis in plants. We demonstrate the stable inheritance of nuclease-induced targeted mutagenesis events in the ADH1 and TT4 genes of Arabidopsis thaliana at frequencies from 2.5 up to 70.0%. Deep sequencing analysis revealed NHEJ-mediated DSB repair in about a third of all reads in T1 plants. In contrast, applying the nickase resulted in the reduction of mutation frequency by at least 740-fold. Nevertheless, the nickase is able to induce HR at similar efficiencies as the nuclease or the homing endonuclease I-SceI. Two different types of somatic HR mechanisms, recombination between tandemly arranged direct repeats as well as gene conversion using the information on an inverted repeat could be enhanced by the nickase to a similar extent as by DSB-inducing enzymes. Thus, the Cas9 nickase has the potential to become an important tool for genome engineering in plants. It should not only be applicable for HR-mediated gene targeting systems but also by the combined action of two nickases as DSB-inducing agents excluding off-target effects in homologous genomic regions.

In planta gene targeting.

The development of designed site-specific endonucleases boosted the establishment of gene targeting (GT) techniques in a row of different species. However, the methods described in plants require a highly efficient transformation and regeneration procedure and, therefore, can be applied to very few species. Here, we describe a highly efficient GT system that is suitable for all transformable plants regardless of transformation efficiency. Efficient in planta GT was achieved in Arabidopsis thaliana by expression of a site-specific endonuclease that not only cuts within the target but also the chromosomal transgenic donor, leading to an excised targeting vector. Progeny clonal for the targeted allele could be obtained directly by harvesting seeds. Targeted events could be identified up to approximately once per 100 seeds depending on the target donor combination. Molecular analysis demonstrated that, in almost all events, homologous recombination occurred at both ends of the break. No ectopic integration of the GT vector was found.

Gene targeting in plants: 25 years later.

Only five years after the initiation of transgenic research in plants, gene targeting (GT) was achieved for the first time in tobacco. Unfortunately, the frequency of targeted integration via homologous recombination (HR) was so low in comparison to random integration that GT could not be established as a feasible technique in higher plants. It took another 25 years and great effort to develop the knowledge and tools necessary to overcome this challenge, at least for some plant species. In some cases, the overexpression of proteins involved in HR or the use of negative selectable markers improved GT to a certain extent. An effective solution to this problem was developed in 1996, when a sequence-specific endonuclease was used to induce a double-strand break (DSB) at the target locus. Thus, GT frequencies were enhanced dramatically. Thereafter, the main limitation was the absence of tools needed to induce DSBs at specific sites in the genome. Such tools became available with the development of zinc finger nucleases (ZFNs), and a breakthrough was achieved in 2005 when ZFNs were used to target a marker gene in tobacco. Subsequently, endogenous loci were targeted in maize, tobacco and Arabidopsis. Recently, our toolbox for genetic engineering has expanded with the addition of more types of site-specific endonucleases, meganucleases, transcription activator-like effector nucleases (TALENs) and the CRISPR/Cas system. We assume that targeted genome modifications will become routine in the near future in crop plants using these nucleases along with the newly developed in planta GT technique.

Highly efficient heritable plant genome engineering using Cas9 orthologues from Streptococcus thermophilus and Staphylococcus aureus.

The application of the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas system of Streptococcus pyogenes (SpCas9) is currently revolutionizing genome engineering in plants. However, synthetic plant biology will require more complex manipulations of genomes and transcriptomes. The simultaneous addressing of different specific genomic sites with independent enzyme activities within the same cell is a key to this issue. Such approaches can be achieved by the adaptation of additional bacterial orthologues of the CRISPR/Cas system for use in plant cells. Here, we show that codon-optimised Cas9 orthologues from Streptococcus thermophilus (St1Cas9) and Staphylococcus aureus (SaCas9) can both be used to induce error-prone non-homologous end-joining-mediated targeted mutagenesis in the model plant Arabidopsis thaliana at frequencies at least comparable to those that have previously been reported for the S. pyogenes CRISPR/Cas system. Stable inheritance of the induced targeted mutations of the ADH1 gene was demonstrated for both St1Cas9- and SaCas9-based systems at high frequencies. We were also able to demonstrate that the SaCas9 and SpCas9 proteins enhance homologous recombination via the induction of double-strand breaks only in the presence of their species-specific single guide (sg) RNAs. These proteins are not prone to inter-species interference with heterologous sgRNA expression constructs. Thus, the CRISPR/Cas systems of S. pyogenes and S. aureus should be appropriate for simultaneously addressing different sequence motifs with different enzyme activities in the same plant cell.

DNA recombination in somatic plant cells: mechanisms and evolutionary consequences

In somatic cells, recombination is a means of DNA damage repair. The most severe type of damage in nuclear DNA is double-strand breaks (DSBs) which may be repaired via either non-homologous end joining (NHEJ) or homologous recombination (HR). In this review, we will summarize the basic features, the mechanisms, and the key players of both repair modes in plants with a focus on the model plant Arabidopsis thaliana. NHEJ may result in insertion of sequences from elsewhere in the genome but is much more often associated with deletions. If more than one DSB is processed simultaneously via NHEJ, besides deletions, inversions or translocations may also arise. As the germ line is only set aside late in plant development, somatic changes may be transferred to the next generation. Thus, NHEJ might influence the evolution of plant genomes and indeed seems to be an important factor of genome shrinking. Deletions may also be due to DSB-induced recombination between tandem duplicated homologous sequences by single-strand annealing (SSA). Moreover, conservative HR using the synthesis-dependent strand annealing (SDSA) mechanism operates in somatic plant cells. The efficiency of SDSA is dependent on the genomic template used as matrix for the repair of the DSB. Besides DSBs, stalled replication forks may also be processed via HR. Several DNA processing enzymes are involved in the regulation of replication initiated HR, mostly in its suppression, and we summarize the current knowledge of these processes in plants.

Repair of adjacent single-strand breaks is often accompanied by the formation of tandem sequence duplications in plant genomes

Significance A major principle in genome evolution is the duplication of existing sequences. Various mechanisms linked to DNA replication, homologous recombination, or double-strand break repair have been elucidated over the years. Using the single-strand break (SSB)-inducing nickase variant of the CRISPR/Cas system, we examined genomic alterations following the occurrence of two adjacent SSBs in the model plant Arabidopsis thaliana. In addition to deletions, tandem duplications were found regularly, with both outcomes indicating partial involvement of microhomologies. These results demonstrate that the repair of adjacent SSBs plays a surprising and important role in shaping plant genomes during evolution. Duplication of existing sequences is a major mechanism of genome evolution. It has been previously shown that duplications can occur by replication slippage, unequal sister chromatid exchange, homologous recombination, and aberrant double-strand break-induced synthesis-dependent strand annealing reactions. In a recent study, the abundant presence of short direct repeats was documented by comparative bioinformatics analysis of different rice genomes, and the hypothesis was put forward that such duplications might arise due to the concerted repair of adjacent single-strand breaks (SSBs). Applying the CRISPR/Cas9 technology, we were able to test this hypothesis experimentally in the model plant Arabidopsis thaliana. Using a Cas9 nickase to induce adjacent genomic SSBs in different regions of the genome (genic, intergenic, and heterochromatic) and at different distances (∼20, 50, and 100 bps), we analyzed the repair outcomes by deep sequencing. In addition to deletions, we regularly detected the formation of direct repeats close to the break sites, independent of the genomic context. The formation of these duplications as well as deletions may be associated with the presence of microhomologies. Most interestingly, we found that even the induction of two SSBs on the same DNA strand can cause genome alterations, albeit at a much lower level. Because such a scenario reflects a natural step during nucleotide excision repair, and given that the germline is set aside only late during development in plants, the repair of adjacent SSBs indeed seems to have an important influence on the shaping of plant genomes during evolution.

CRISPR/Cas-Mediated In Planta Gene Targeting.

The recent emergence of the CRISPR/Cas system has boosted the possibilities for precise genome engineering approaches throughout all kingdoms of life. The most common application for plants is targeted mutagenesis, whereby a Cas9-mediated DNA double-strand break (DSB) is repaired by mutagenic nonhomologous end joining (NHEJ). However, the site-specific alteration of a genomic sequence or integration of a transgene relies on the precise repair by homologous recombination (HR) using a suitable donor sequence: this poses a particular challenge in plants, as NHEJ is the preferred repair mechanism for DSBs in somatic tissue. Here, we describe our recently developed in planta gene targeting (ipGT) system, which works via the induction of DSBs by Cas9 to activate the target and the targeting vector at the same time, making it independent of high transformation efficiencies.

Development of Bag-1L as a therapeutic target in androgen receptor-dependent prostate cancer

Targeting the activation function-1 (AF-1) domain located in the N-terminus of the androgen receptor (AR) is an attractive therapeutic alternative to the current approaches to inhibit AR action in prostate cancer (PCa). Here we show that the AR AF-1 is bound by the cochaperone Bag-1L. Mutations in the AR interaction domain or loss of Bag-1L abrogate AR signaling and reduce PCa growth. Clinically, Bag-1L protein levels increase with progression to castration-resistant PCa (CRPC) and high levels of Bag-1L in primary PCa associate with a reduced clinical benefit from abiraterone when these tumors progress. Intriguingly, residues in Bag-1L important for its interaction with the AR AF-1 are within a potentially druggable pocket, implicating Bag-1L as a potential therapeutic target in PCa.

Double-Strand Break Repair and Its Application to Genome Engineering in Plants

The induction of double-strand breaks (DSBs) is the basis for the targeted modification of plant genomes. At the same time, the efficient repair of DSBs is important for the survival of all organisms. To efficiently employ DSB repair for genome manipulation using synthetic nucleases, detailed knowledge of the repair process is required. Many aspects of the mechanisms and factors involved in DSB repair have been elucidated in plants over the last two decades. Here, we seek to summarize our current knowledge about the process of DSB repair via nonhomologous end joining (NHEJ) as well as homologous recombination (HR) and place this knowledge in the context of strategies applied for genome engineering in plants. While the induction of a unique DSB is generally sufficient for editing single genes, the induction of multiple DSBs can be applied for the engineering of genomes. There is no question that the controlled induction of DSBs exhibits great potential for restructuring plant genomes.

CRISPR/Cas-Mediated Site-Specific Mutagenesis in Arabidopsis thaliana Using Cas9 Nucleases and Paired Nickases

The CRISPR/Cas system has recently become the most important tool for genome engineering due to its simple architecture that allows for rapidly changing the target sequence and its applicability to organisms throughout all kingdoms of life. The need for an easy-to-use and reliable nuclease is especially high in plant research, as precise genome modifications are almost impossible to achieve by Agrobacterium-mediated transformation and the regeneration of plants from protoplast cultures is very labor intensive. Here, we describe the application of the Cas9 nuclease to Arabidopsis thaliana for the induction of heritable targeted mutations, which may also be used for other plant species. To cover the concern for off-target activity, we also describe the generation of stable mutants using paired Cas9 nickases.