Fu-An He

Tough and porous piezoelectric P(VDF-TrFE)/organosilicate composite membrane:

Novel P(VDF-TrFE)/organosilicate composite membrane was fabricated by electrospinning. The electrospun composite membrane containing as little as 2 wt% of organosilicate demonstrated significant improvements in strength, modulus, and toughness by about 103%, 45%, and 97%, respectively, when compared with those of electrospun pure P(VDF-TrFE) membrane, while maintaining high porosity and good breathability and piezoelectricity. We believe that such an organosilicate-reinforced durable, porous, and piezoelectric P(VDF-TrFE) membrane has huge advantages in various applications such as flexible sensors, wearable electronics, filter membrane, tissue engineering, battery separator, and polymer electrolyte.

Preparation of Nanofibrous Silver/Poly(vinylidene fluoride) Composite Membrane with Enhanced Infrared Extinction and Controllable Wetting Property

Nanofibrous silver (Ag)/poly(vinylidene fluoride) (PVDF) composite membranes were obtained from a two-step preparation method. In the first step, the electrospun silver nitrate (AgNO3)/PVDF membranes were prepared and the influence of the AgNO3 content on the electrospinning process was studied. According to scanning electron microscopy (SEM) results, when the electrospinning solution contained AgNO3 in the range between 3 to 7 wt.%, the nanofiber morphologies can be obtained. In the second step, the electrospun AgNO3/PVDF membranes were reduced by sodium borohydride to form the nanofibrous Ag/PVDF composite membranes. The resultant composite membranes were characterized by SEM, X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), differential scanning calorimetry, X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared. The XRD, XPS, and EDS characterizations proved the existence of Ag in the nanofibrous Ag/PVDF composite membranes. The crystallinity degree of PVDF for composite membranes declined with the increase in Ag content. More importantly, the nanofibrous Ag/PVDF composite membranes had obviously higher Rosseland extinction coefficients and lower thermal radiative conductivities in comparison with electrospun PVDF membrane, which demonstrates that such composite membranes with high porosity, low density, and good water vapor permeability are promising thermal insulating materials to block the heat transfer resulting from thermal radiation. In addition, three different methods for surface modification have been used to successfully improve the hydrophobicity of nanofibrous Ag/PVDF composite membranes.

Preparation of PEO-b-PPO-b-PEO/α-cyclodextrin supramolecular hydrogels hybridized with exfoliated graphite nanoplates

Abstract In this work, an effective method was developed to prepare novel PEO-b-PPO-b-PEO (EPE)/α-cyclodextrin (α-CD) supramolecular hydrogels containing exfoliated graphite nanoplates (xGNPs) by mixing an aqueous solution of α-CD with an aqueous dispersion of xGNPs at the presence of amphiphilic EPE copolymer. The EPE copolymer played three important roles in the preparation process: (1) as an exfoliating agent to break expanded graphites into xGNPs under ultrasonication, (2) as a dispersant to stabilize xGNPs in the aqueous solution, and （3）as a component to form the inclusion complexes with α-CD. The resultant xGNPs/EPE/α-CD hybridized hydrogels were characterized by scanning electron microscopy, wide-angle X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy, which confirmed not only the formation of supramolecular hydrogel structure but also the homogenous dispersion of xGNPs in the hydrogel matrix. It was found that the existence of xGNPs can accelerate the speed of gel formation in comparison with that of the native EPE/α-CD hydrogel. Additionally, the water-retention ability and the release behavior of vancomycin hydrochloride for the xGNPs/EPE/α-CD hybridized hydrogels were investigated.

Preparation and dielectric properties of composites based on PVDF and PVDF-grafted graphene obtained from electrospinning-hot pressing method

ABSTRACT In this work, graphene was modified by the grafting of poly(vinylidene fluoride) (PVDF) using Friedel-Crafts reaction to form PVDF-grafted graphene (PGG) filler, which was confirmed by transmission electron microscope, Fourier transform infrared, Raman spectroscopy, wide angle X-ray diffraction, and thermogravimetric analysis. The solution containing as-prepared PVDF-grafted graphene and PVDF was electrospun to form fibrous membranes, which was subjected to hot pressing in the laminating mode to prepare solid PGG/PVDF composite films. The structures of electrospun fibrous membrane and solid PGG/PVDF composite film were investigated by scanning electron microscope. Furthermore, it could be found that the dielectric constants of PGG/PVDF composites exhibiting relatively low dielectric loss factors were significantly higher than that of pure PVDF.