Fulya Dogan

Low temperature stabilization of cubic (Li7−xAlx/3)La3Zr2O12: role of aluminum during formation

The lithium lanthanum zirconium oxide garnet, Li7La3Zr2O12 (LLZ), has received significant attention in recent years due to its high room temperature lithium ion conductivity and its stability against lithium metal. Together these features make it a promising electrolyte candidate for a high energy all solid-state battery. Previous studies have shown that incorporation of aluminum cations during the synthesis stabilizes the higher conductivity cubic phase of LLZ; however the incorporation process and its effect on the phase transition are still unclear. In the present study, we have combined powder X-ray diffraction (XRD), 27Al and 7Li MAS NMR and high-resolution X-ray diffraction (HRXRD) to determine the disposition of Al cations during the formation of low temperature cubic LLZ. At temperatures as low as 700 °C, the aluminum is incorporated into amorphous or nanocrystalline grain boundary phases. Above 700 °C, the Al cations are associated with a poorly crystalline anti-fluorite phase Li5AlO4, composed of molecular [AlO4]5− anions. This phase then reacts with tetragonal LLZ to form cubic LLZ over a 25 hour period at 850 °C. Although the reaction appears complete by powder X-ray diffraction, 27Al NMR spectra showed overlapping resonances suggesting multiple Al environments due to uneven substitution of the 24d Li(1) site. This was confirmed by high-resolution XRD and was consistent with a series of closely related cubic LLZ phases with slightly different Al concentrations, indicating the slower Al(III) diffusion within the lattice has not reached equilibrium in the time allotted. The disorder over the two crystallographic tetrahedral sites by lithium and aluminum cations at this temperature contributes to the observed lattice enlargement associated with the low temperature cubic phase.

Pristine-state structure of lithium-ion-battery cathode material Li1.2Mn0.4Co0.4O2 derived from NMR bond pathway analysis

Layered lithium ion battery cathode materials have been extensively investigated, of which layered–layered composites xLi2MnO3·(1 − x)LiMO2 (M = Mn, Co, Ni) are of particular interest, owing to their high energy density. Before the structural transformations that occur in these materials with cycling can be understood, the structure of the pristine material must be established. In this work, NMR spectra are measured for the model layered–layered system xLi2MnO3·(1 − x)LiCoO2 and Bond-Pathway-model analysis is applied to elucidate the atomic arrangement and domain structure of this material in its pristine state, before electrochemical cycling. The simplest structural element of an Li2MnO3 domain consists of a stripe of composition LiMn2 parallel to a crystallographic axis in a metal layer of the composite. A simple model of the composite structure may be constructed by a superposition of such stripes in an LiCoO2 background. We show that such a model can account for most of the features of the observed NMR spectra.

Exploring Lithium-Cobalt-Nickel Oxide Spinel Electrodes for ≥3.5 V Li-Ion Cells

Recent reports have indicated that a manganese oxide spinel component, when embedded in a relatively small concentration in layered xLi2MnO3·(1-x)LiMO2 (M = Ni, Mn, or Co) electrode systems, can act as a stabilizer that increases their capacity, rate capability, cycle life, and first-cycle efficiency. These findings prompted us to explore the possibility of exploiting lithiated cobalt oxide spinel stabilizers by taking advantage of (1) the low mobility of cobalt ions relative to that of manganese and nickel ions in close-packed oxides and (2) their higher potential (∼3.6 V vs Li0) relative to manganese oxide spinels (∼2.9 V vs Li0) for the spinel-to-lithiated spinel electrochemical reaction. In particular, we revisited the structural and electrochemical properties of lithiated spinels in the LiCo1-xNixO2 (0 ≤ x ≤ 0.2) system, first reported almost 25 years ago, by means of high-resolution (synchrotron) X-ray diffraction, transmission electron microscopy, nuclear magnetic resonance spectroscopy, electrochemical cell tests, and theoretical calculations. The results provide a deeper understanding of the complexity of intergrown layered/lithiated spinel LiCo1-xNixO2 structures when prepared in air between 400 and 800 °C and the impact of structural variations on their electrochemical behavior. These structures, when used in low concentrations, offer the possibility of improving the cycling stability, energy, and power of high energy (≥3.5 V) lithium-ion cells.

Experimental and theoretical investigations of functionalized boron nitride as electrode materials for Li-ion batteries

The feasibility of synthesizing functionalized h-BN (FBN) via the reaction between molten LiOH and solid h-BN is studied for the first time and its first ever application as an electrode material in Li-ion batteries is evaluated. Density functional theory (DFT) calculations are performed to provide mechanistic understanding of the possible electrochemical reactions derived from the FBN. Various materials characterizations reveal that the melt-solid reaction can lead to exfoliation and functionalization of h-BN simultaneously, while electrochemical analysis proves that the FBN can reversibly store charges through surface redox reactions with good cycle stability and coulombic efficiency. DFT calculations have provided physical insights into the observed electrochemical properties derived from the FBN.

Methodology for understanding interactions between electrolyte additives and cathodes: a case of the tris(2,2,2-trifluoroethyl)phosphite additive

Use of electrolyte additives is a promising route to address surface destabilization issues of lithium transition metal (TM)-oxide cathodes (for example, lithium nickel-manganese-cobalt oxides (NMCs)) that occur as they are charged to high voltages (>4.3 V vs. Li/Li+). Despite the successful discovery of several additives, their working mechanisms are often vaguely understood. In this work, we provide a methodology to comprehensively understand additive/cathode interactions in lithium-ion batteries. A case of the tris(2,2,2-trifluoroethyl)phosphite (TTFP) additive is presented where its decomposition behavior was investigated at 4.6 V vs. Li/Li+ in a Li4Ti5O12 (LTO)/Li1.03(Ni0.5Mn0.3Co0.2)0.97O2 (NMC532) cell. Overall, we found that while some of the additive does modify the surface film on the cathode and binds at the surface, it does not passivate the cathode surface towards electrolyte oxidation. Rather, the majority of the TTFP forms stable, free tris(2,2,2-trifluoroethyl)phosphate (TTFPa) molecules by removing O atoms from the charged NMC cathode surface, some of which then further react with the electrolyte solvents and stay in solution. Finally, we propose a stable configuration in which TTFP is bound to the cathode surface via a P–O–TM bond, with one of the –CH2CF3 side groups removed, leading to the formation of BTFPa (bis(2,2,2-trifluoroethyl)phosphate). We anticipate that these techniques and findings could be extended to other additives as well, especially phosphite-based additives, allowing the effective design of future additives.