Fumiaki Okumura

Improvements in Drill-Core Headspace Gas Analysis for Samples from Microbially Active Depths

The IsoJar™ container is widely used in headspace gas analysis for gases adsorbed on cuttings or bore cores from oil and gas fields. However, large variations in the carbon isotopic ratios of CH4 and CO2 are often reported, especially for data obtained from depths of 30‰, whereas samples analyzed within a week of collection showed no such fluctuations. The conventional amount of microbial suppressant (~0.5u2009ml of 10% benzalkonium chloride (BKC) solution) is insufficient to suppress microbial activity if groundwater is used as filling water. The significant variations in carbon isotopic compositions previously reported were caused by microbial methane oxidation after sampling and contamination by groundwater from different depths. To avoid these problems, we recommend the following: (1) if long-term sample storage is necessary, >10u2009ml of 10% BKC solution should be added or >0.3% BKC concentration is required to suppress microbial activity; (2) analyses should be performed within one week of sampling; and (3) for CO2 analyses, it is important that samples are not contaminated by groundwater from different depths.