Fumie Kato

Determination of indomethacin polymorphic contents by chemometric near-infrared spectroscopy and conventional powder X-ray diffractometry

A chemoinfometric method for the quantitative determination of the crystal content of indomethacin (IMC) polymorphs, based on Fourier-transform near-infrared (FT-NIR) spectroscopy, was established. A direct comparison of the data with those collected using the conventional powder X-ray diffraction method was performed. Pure alpha and gamma forms of IMC were prepared using published methods. Powder X-ray diffraction profiles and NIR spectra were recorded for six kinds of standard material with various contents of the gamma form of IMC. Principal component regression (PCR) analyses were performed on the basis of the normalized NIR spectral sets of standard samples with known contents of the gamma form of IMC. A calibration equation was determined to minimize the root mean square error of the prediction. The predicted gamma form contents were reproducible and had a relatively small standard deviation. The values of the gamma form contents predicted by the two methods were in close agreement. The results indicated that NIR spectroscopy provides an accurate quantitative analysis of crystallinity in polymorphs compared with the results obtained by conventional powder X-ray diffractometry.

Comparative evaluation of the degree of indomethacin crystallinity by chemoinfometrical fourie-transformed near-infrared spectroscopy and conventional powder X-ray diffractiometry

A chemoinfometrical method for evaluating the degree of crystallinity based on fourie-transformed near-infrared (FT-NIR) spectroscopy was established and compared with the conventional powder X-ray diffraction method. Powder X-ray diffraction profiles and FT-NIR spectra were recorded for 11 kinds of standard materials with various degrees of crystallinity obtained by physically mixing crystalline and amorphous indomethacin (IMC). Chemoinfometric analysis was performed on the FT-NIR spectral data sets by multiple linear regression (MLR) (MLR-Set-Up Search program). The crystalline and amorphous forms showed significant NIR spectral peaks. MLR analysis was performed based on normalized NIR spectra sets for standard samples of known crystallinity. A calibration equation was determined to minimize the root mean square error of prediction. The predicted crystallinity values were reproducible and had a smaller standard deviation. The values of crystallinity predicted by X-ray powder diffractometry and FT-NIR spectrometry suggested a satisfactory correlation between the 2 techniques. The results indicated that FT-NIR spectroscopy provides for an accurate quantitative analysis of crystallinity compared with conventional X-ray diffractometry.

Comparative Determination of Polymorphs of Indomethacin in Powders and Tablets by Chemometrical Near-Infrared Spectroscopy and X-ray Powder Diffractometry

The purpose of this research was to develop a rapid chemometrical method based on near-infrared (NIR) spectroscopy to determine indomethacin (IMC) polymorphic content in mixed pharmaceutical powder and tablets. Mixed powder samples with known polymorphic contents of forms α and γ were obtained from physical mixing of 50% of IMC standard polymorphic sample and 50% of excipient mixed powder sample consisting of lactose, corn starch, and hydroxypropyl-cellulose. The tablets were obtained by compressing the mixed powder at 245 MPa. X-ray powder diffraction profiles and NIR spectra were recorded for 6 kinds of standard materials with various polymorphic contents. The principal component regression analysis was performed based on normalized NIR spectra sets of mixed powder standard samples and tablets. The relationships between the actual and predicted polymorphic contents of form g in the mixed powder measured using x-ray powder diffraction and NIR spectroscopy show a straight line with a slope of 0.960 and 0.995, and correlation coefficient constants of 0.970 and 0.993, respectively. The predicted content values of unknown samples by x-ray powder diffraction and NIR spectroscopy were reproducible and in close agreement, but those by NIR spectroscopy had smaller SDs than those by x-ray powder diffraction. The results suggest that NIR spectroscopy provides a more accurate quantitative analysis of polymorphic content in pharmaceutical mixed powder and tablets than does conventional x-ray powder diffractometry.

Physicochemical stability of cimetidine amorphous forms estimated by isothermal microcalorimetry

The effect of humidity on the physicochemical properties of amorphous forms of cimetidine was investigated using differential scanning calorimetry, isothermal microcalorimetry, and x-ray diffraction analysis. Amorphous forms were obtained by the melting (amorphous form M [AM]) and the cotton candy (amorphous form C [AC]) methods. Thermal behaviors of AM and AC with or without seed crystals were measured using an isothermal microcalorimeter under various conditions of relative humidity (RH) and temperature, respectively. The crystallization kinetics of amorphous solids was analyzed based on 10 kinds of solid-state reaction models. AM transformed into form A at 11% RH, 50°C but transformed into a mixture of form A and monohydrate at 51% and 75% RH at 25°C. The mean crystallization times (MCTs) of the heat flow curve of AM and AC at 11% RH, 50°C were 47.82 and 32.00 hours, respectively, but at 11% RH, 25°C both were more than 4320 hours. In contrast, AC transformed into form A under all storage conditions. The MCTs of AC at 51% and 75% RH were 29.61 and 11.81 hours, respectively; whereas the MCTs of AM were 46.79 and 15.52 hours, respectively. The crystallization of amorphous solids followed the three-dimensional growth of nuclei (Avrami equation) with an induction period (IP). The IP for AM at 11% RH, 50°C was more than 2 times that for AC, but the difference in the crystal growth rate constant (CR) between AC and AM was within 10%. The IP for AM at 75% RH, 25°C was reduced to only 10% of the IP at 51% RH with increasing humidity, but the CR did not change significantly. In contrast, the IP for AC was slightly reduced at 75% RH compared with 51% RH, but the CR was about 5 times greater. At 75% RH, 25°C, the IP and CR of AM were about one-fourth the values of AC. This result suggests that the crystallization process consists of an initial stage during which the nuclei are formed and a final stage of growth.