Furitsu Suzuki

Purely organic electroluminescent material realizing 100% conversion from electricity to light

Efficient organic light-emitting diodes have been developed using emitters containing rare metals, such as platinum and iridium complexes. However, there is an urgent need to develop emitters composed of more abundant materials. Here we show a thermally activated delayed fluorescence material for organic light-emitting diodes, which realizes both approximately 100% photoluminescence quantum yield and approximately 100% up-conversion of the triplet to singlet excited state. The material contains electron-donating diphenylaminocarbazole and electron-accepting triphenyltriazine moieties. The typical trade-off between effective emission and triplet-to-singlet up-conversion is overcome by fine-tuning the highest occupied molecular orbital and lowest unoccupied molecular orbital distributions. The nearly zero singlet–triplet energy gap, smaller than the thermal energy at room temperature, results in an organic light-emitting diode with external quantum efficiency of 29.6%. An external quantum efficiency of 41.5% is obtained when using an out-coupling sheet. The external quantum efficiency is 30.7% even at a high luminance of 3,000 cd m−2.

On‐Top π‐Stacking of Quasiplanar Molecules in Hole‐Transporting Materials: Inducing Anisotropic Carrier Mobility in Amorphous Films

Dimers of partially oxygen-bridged triarylamines were designed and synthesized as hole-transporting materials. X-ray structural analyses revealed that these compounds form on-top π-stacking aggregates in the crystalline state. TRMC measurements showed that high levels of anisotropic charge transport were induced in the direction of the π-stacking. Surprisingly, even in vacuum-deposited amorphous films, these compounds retained some of the face-on π-stacking, thus facilitating an out-of-plane carrier mobility.

Structure and crystallization of sub-elementary fibrils of bacterial cellulose isolated by using a fluorescent brightening agent

The structure and crystallization of carefully isolated sub-elementary fibrils (SEFs) of bacterial cellulose have been investigated using TEM, WAXD, and high-resolution solid-state 13C NMR. The addition of a suitable amount of fluorescent brightener (FB) to the incubation medium of Acetobacter xylinum effectively suppressed the aggregation of the SEFs into the microfibrils, as previously reported. However, this study confirmed for the first time that serious structural change in the SEFs occurs during the removal of excess FB by washing with buffer solutions having pH values higher than 6 or with the alkaline aqueous solution that was frequently used in previous studies. In contrast, the isolation of unmodified SEFs was successfully performed by utilizing a washing protocol employing pH 7 citrate–phosphate buffer solution containing 1% sodium dodecyl sulfate. High-resolution solid-state 13C NMR and WAXD measurements revealed that the SEFs thus isolated are in the noncrystalline state in which the pyranose rings of the almost parallel cellulose chains appear to be stacked on each other. The respective CH2OH groups of the SEFs adopt the gt conformation instead of the tg conformation found in cellulose Iα and Iβ crystals, and undergo significantly enhanced molecular motion in the absence of intermolecular hydrogen bonding associated with these groups. The main chains are also subject to rapid motional fluctuations while maintaining the parallel orientation of the respective chains, indicating that the SEFs have a liquid crystal-like structure with high molecular mobility. Moreover, the SEFs crystallize into cellulose Iβ when the FB molecules that may adhere to the surface of the SEFs are removed by extraction with boiling 70 v/v% ethanol and 0.1N NaOH aqueous solution. On the basis of these results, the crystallization of the SEFs into the Iα and Iβ forms is discussed, including the possible formation of the crystalline-noncrystalline periodic structure in native cellulose.

Difference in the structures of alanine tri- and tetra-peptides with antiparallel β-sheet assessed by X-ray diffraction, solid-state NMR and chemical shift calculations by GIPAW

Alanine oligomers provide a key structure for silk fibers from spider and wild silkworms.We report on structural analysis of L-alanyl-L-alanyl-L-alanyl-L-alanine (Ala)4 with anti-parallel (AP) β-structures using X-ray and solid-state NMR. All of the Ala residues in the (Ala)4 are in equivalent positions, whereas for alanine trimer (Ala)3 there are two alternative locations in a unit cell as reported previously (Fawcett and Camerman, Acta Cryst., 1975, 31, 658-665). (Ala)4 with AP β-structure is more stable than AP-(Ala)3 due to formation of the stronger hydrogen bonds. The intermolecular structure of (Ala)4 is also different from polyalanine fiber structure, indicating that the interchain arrangement of AP β-structure changes with increasing alanine sequencelength. Furthermore the precise (1)H positions, which are usually inaccesible by X-ray diffraction method, are determined by high resolution (1)H solid state NMR combined with the chemical shift calculations by the gauge-including projector augmented wave method.

Detailed analysis of charge transport in amorphous organic thin layer by multiscale simulation without any adjustable parameters

Hopping-type charge transport in an amorphous thin layer composed of organic molecules is simulated by the combined use of molecular dynamics, quantum chemical, and Monte Carlo calculations. By explicitly considering the molecular structure and the disordered intermolecular packing, we reasonably reproduce the experimental hole and electron mobilities and their applied electric field dependence (Poole–Frenkel behaviour) without using any adjustable parameters. We find that the distribution of the density-of-states originating from the amorphous nature has a significant impact on both the mobilities and Poole–Frenkel behaviour. Detailed analysis is also provided to reveal the molecular-level origin of the charge transport, including the origin of Poole–Frenkel behaviour.

Multiscale simulation of charge transport in a host material, N,N′-dicarbazole-3,5-benzene (mCP), for organic light-emitting diodes

We have performed multiscale charge transport simulations in organic amorphous thin films by explicitly considering organic molecules. The simulations were based on quantum chemical and Monte Carlo calculations. The amorphous layer was composed of N,N′-dicarbazole-3,5-benzene, which is a widely used host material in the emissive layer of blue-emitting organic light-emitting diodes. The hole mobility was calculated to be three to four times larger than the electron mobility. This trend was consistent with the experimentally obtained mobility ratio. It was also found that the charges are transported dominantly by a diffusion-type character at low applied electric fields and the contribution of the drift-type character increases as the applied electric field is increased. The difference between the number of hops in the forward and the backward directions contributes to the actual charge transport. From the detailed molecular level analysis, it was turned out that the molecular pairs with a large electronic coupling do not necessarily have large contributions to the charge transport, rather they can temporarily trap charges. We found important molecular pairs, which form effective charge-transfer paths, although the electronic coupling was not substantially large.

Refined Crystal Structure of Samia cynthia ricini Silk Fibroin Revealed by Solid-State NMR Investigations

Samia cynthia ricini is one of the wild silkworms and its silk fibroin (SF) consists of alternatively repeating poly-l-alanine (PLA) sequences as crystalline domain and glycine-rich sequences as noncrystalline domain; the structure is similar to those of spider silk and other wild silkworm silks. In this paper, we proposed a new staggered model for the packing arrangement of the PLA sequence through the use of the Cambridge Serial Total Energy Package program and a comparison of the observed and calculated chemical shifts of the PLA sequence with the Gauge Including Projector Augmented Wave method. The new model was supported by the interatomic distance information from the cross peaks of Ala Cβ dipolar-assisted rotational resonance (DARR) spectrum of the PLA sequences in S. c. ricini SF fiber. In addition, three 13C NMR peaks observed in the β-sheet region were assigned to the carbons with different environments in the same model, but not assigned to different β-sheet structures.

Effects of Structural and Energetic Disorders on Charge Transports in Crystal and Amorphous Organic Layers

Understanding charge transports in organic films is important for both fundamental science and practical applications. Here, contributions of off-diagonal (structural) and diagonal (energetic) disorders to charge transports were clarified using molecular-based multiscale simulation. These disorders, important for understanding charge transport in organic systems, are investigated by comparing crystal and amorphous aggregates of N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-biphenyl-4,4′-diamine (NPD). Although NPD has been used as a hole transport material, it also exhibits comparable electron mobility experimentally. The experimental mobility and its electric field dependence in amorphous layers were reasonably reproduced by the multiscale simulation, confirming the electron transport properties of NPD. We assumed that the structural disorder would lower mobilities; however, the mobilities were found to be independent of the degree of structural disorder. Energetic disorder markedly lowered charge mobility instead. Charge migration in crystals was dominated by maximum electronic coupling pairs, whereas small electronic coupling pairs significantly contributed to charge transport in amorphous aggregate.

Organic light-emitting diodes: Multiscale charge transport simulation and fabrication of new thermally activated delayed fluorescence (TADF) materials

Charge transports in amorphous thin films with 100 nm thickness are investigated in silico by explicitly considering organic molecules. The amorphous layer of organic molecules was constructed using molecular dynamics simulations. The rate constants for charge hopping between two organic molecules, extracted from the amorphous layers, were calculated based on quantum chemical calculations. The hopping transport in amorphous layers was simulated using a Monte Carlo method. The hole mobility was calculated to be several times larger than the electron mobility, which was consistent with the experimental results. The Monte Carlo simulation also shows that diffusion transport is dominant at low applied electric fields and that contribution of drift transport increases at high electric fields. The simulation in this study enables us to reveal molecular origin of charge transport. In the presentation, we will show the results on recently-developed new thermally activated delayed fluorescence materials and the device performances.