G. Klemz

Generation of flat-top picosecond pulses by coherent pulse stacking in a multicrystal birefringent filter

This paper deals with the pulse-shaping properties of birefringent filters that feature an optical layout similar to a Solc fan filter. A simple computational model is given that explains the pulse-shaping process in the fan filter in two steps: First, the input pulse is split into several mutually delayed replicas due to the birefringence of the crystals. Second, these replicas interfere at the output polarizer of the filter and form the shaped output pulse. Fine-tuning of the phases of the replicas of the input pulse is permitted by tuning the temperature of the crystals. A birefringent pulse shaper containing ten birefringent crystals was investigated experimentally. The shape of the output pulses was measured by means of a special cross-correlation technique. Although a variety of pulse shapes can be generated with the described filter, it is particularly well suited for generation of flattop pulses featuring a 20-ps-long plateau and rising and falling edges shorter than 2 ps.

Design study of an optical cavity for a future photon collider at ILC

Hard photons well above 100 GeV have to be generated in a future photon-collider which essentially will be based on the infrastructure of the planned International Linear Collider (ILC). The energy of near-infrared laser photons will be boosted by Compton backscattering against a high energy relativistic electron beam. For high effectiveness, a very powerful lasersystem is required that exceeds todays state-of-the-art capabilities. In this paper a design of an auxiliary passive cavity is discussed that resonantly enhances the peak-power of the laser. The properties and prospects of such a cavity are addressed on the basis of the specifications for the European TeV Energy Superconducting Linear Accelerator (TESLA) proposal. Those of the ILC are expected to be similar.

Electron beam diagnostics for a superconducting radio frequency photoelectron injector

A superconducting radio frequency (SRF) photoelectron injector is currently under construction by a collaboration of BESSY, DESY, FZD, and MBI. The project aims at the design and setup of a continuous-wave SRF injector including a diagnostics beamline for the ELBE free electron laser (FEL) and to address R&D issues on low emittance injectors for future light sources such as the BESSY FEL. Of critical importance for the injector performance is the control of the electron beam parameters. For this reason a compact diagnostics beamline is under development, serving a multitude of operation settings. In this paper the layout and the rationale of the diagnostics beamline are described. Furthermore detailed information on specific components is given, together with results from laboratory tests and data taking.

Operation of the superconducting RF photo gun at ELBE

As the first superconducting RF photo-injector (SRF gun) in practical operation, the SRF gun has been successfully connected to the superconducting linac ELBE at Forschungzentrum Dresden-Rossendorf. The injection with this new gun will improve the beam quality for the users of the radiation source. The SRF gun contains a 3½ cell superconducting accelerating cavity with a frequency of 1.3 GHz. The design is for use of normal conducting photocathodes. At present, caesium telluride photocathodes are applied which are illuminated by an ultraviolet laser beam. The kinetic energy of the produced electron beam is 3 MeV which belongs to a peak electric field of 16 MV/m in the cavity. The maximum bunch charge which is obtained and measured in a Faraday cup is about 400 pC (20 μA average current at a repetition rate of 50 kHz). The SRF gun injector is connected to the ELBE accelerator via a dogleg with two 45° deflection magnets. This connection beam line was commissioned in January 2010. A first beam injection into the ELBE accelerator has been carried out with a bunch charge of 120 pC (6 μA at 50 kHz). Detailed measurements showed that beam loss occurred in the dogleg above 60 pC due to the correlated energy spread. In order to find the optimal operation conditions, energy spread was measured in dependence of bunch charge, laser phase and further gun parameters. The Cs2Te photocathode shows an excellent life time. It is in the gun since May 2010 with about 300 h beam time and about 7 C extracted charge. In the present cavity, the limit for the acceleration gradient is field emission due to some defect on the cavity surface and problems during cleaning. Therefore a modified 3½ niobium cavity has been fabricated, which will increase the RF gradient in the gun and thus improve the beam parameters further.

Rossendorf SRF‐Gun Cavity Characteristics

At the Forschungszentrum Dresden‐Rossendorf the development and the setup of the 2nd superconducting radio frequency photo electron injector (SRF‐Photo‐Gun) is finished. This new injector is placed next to the existing thermionic gun of the superconducting linear accelerator ELBE. A connection between the accelerator and the SRF‐Gun will provide improved beam parameters for the users at the second half of 2009. At the moment the commissioning is fully under way. We will report on important results concerning cavity commissioning like measurements of: Q vs. E, microphonics, Lorentz detuning, tuner parameters, pressure sensibility and in‐situ fundamental mode field distribution calculated from measured pass band.

The new superconducting RF photoinjector at the ELBE linac

Most of the proposed electron accelerator projects for future free electron lasers, energy recovery linacs, or 4th generation light sources require electron beams with an unprecedented combination of high-brightness, low emittance and high average current. For that reason existing electron injectors must be considerably improved or new injector concepts developed. One very promising approach represents the superconducting radio frequency photoinjector (SRF gun). This injector type combines the advantages of a conventional photoelectron injector with that of superconducting acceleration, i.e. the very low RF losses and simple continuous wave operation. A SRF gun was developed and installed at Forschungszentrum Dresden-Rossendorf for operation at the ELBE superconducting linear accelerator. In November 2007 the first beam was produced. First commissioning results have been collected. Besides an improvement of beam quality and parameter range the SRF gun serves as a test bench for further development, evaluation and optimization since it is the first injector of its type which is operating at an accelerator worldwide