G. Li Causi

Ground-based and Airborne Instrumentation for Astronomy IV

MOONS is a new conceptual design for a Multi-Object Optical and Near-infrared Spectrograph for the Very Large Telescope (VLT), selected by ESO for a Phase A study. The baseline design consists of ~1000 fibers deployable over a field of view of ~500 square arcmin, the largest patrol field offered by the Nasmyth focus at the VLT. The total wavelength coverage is 0.8μm-1.8μm and two resolution modes: medium resolution and high resolution. In the medium resolution mode (R~4,000-6,000) the entire wavelength range 0.8μm-1.8μm is observed simultaneously, while the high resolution mode covers simultaneously three selected spectral regions: one around the CaII triplet (at R~8,000) to measure radial velocities, and two regions at R~20,000 one in the J-band and one in the H-band, for detailed measurements of chemical abundances. The grasp of the 8.2m Very Large Telescope (VLT) combined with the large multiplex and wavelength coverage of MOONS – extending into the near-IR – will provide the observational power necessary to study galaxy formation and evolution over the entire history of the Universe, from our Milky Way, through the redshift desert and up to the epoch of re-ionization at z<8-9. At the same time, the high spectral resolution mode will allow astronomers to study chemical abundances of stars in our Galaxy, in particular in the highly obscured regions of the Bulge, and provide the necessary follow-up of the Gaia mission. Such characteristics and versatility make MOONS the long-awaited workhorse near-IR MOS for the VLT, which will perfectly complement optical spectroscopy performed by FLAMES and VIMOS.

Optical and Infrared Observations of the Supernova SN 1999el

Optical and near-infrared light curves of the Type IIn supernova SN 1999el in NGC 6951 are presented. A period of 220 days (416 days in the near-infrared) is covered from the first observation obtained a few days before maximum light. Spectroscopic observations are also discussed. Using as a distance calibrator the Type Ia SN 2000E, which occurred some months later in the same galaxy, and fitting a blackbody law to the photometric data, we obtain a maximum bolometric luminosity for SN 1999el of ~1044 ergs s-1. In general, the photometric properties of SN 1999el are very similar to those of SN 1998S, a bright and well-studied Type IIn supernova, showing a fast decline in all observed bands similar to those of Type II-L supernovae. The differences with SN 1998S are analyzed and ascribed to the differences in a preexisting circumstellar envelope in which dust was already present at the moment of the SN outburst. We infer that light echoes may play a possibly significant role in affecting the observed properties of the light curves, although improved theoretical models are needed to account for the data. We conclude that mass loss in the progenitor RG stars is episodic and occurs in an asymmetric way. This implies that collapsing massive stars appear as normal Type II supernovae if this occurs far from major mass-loss episodes, whereas they appear as Type IIn supernovae if a large mass-loss episode is in progress.

On the Nature of EXor Accretion Events: An Infrequent Manifestation of a Common Phenomenology?

We present the results of a comparison between classical and newly identified EXor based on literature data and aimed at recognizing possible differences or similarities between the categories. Optical and near-IR two-color diagrams, modalities of fluctuations, and derived values of the mass accretion rates are indicative of strong similarities between the two samples. We demonstrate how the difference between the outburst and the quiescence spectral energy distribution of all EXor can be well fitted with a single blackbody, as if an additional thermal component appears during the outbursting phase. Temperatures of this additional component span between 1000 and 4500 K, while the radii of the emitting regions (assumed to be a uniform disk) span between 0.01 and 0.1 AU, sizes typical of the inner portions of the circumstellar disk. Spots persisting up to 50% of the outburst duration, not exceeding 10% of the stellar surface, and with temperatures compatible with the EXor mass accretion rates, are able to account for both the appearance of the additional thermal component and the dust sublimation in the inner structures of the disk. We also compare the EXor events with the most significant color and magnitude fluctuations of active T Tauri stars finding that (1) burst accretion phenomena should also be important for this latter class and (2) EXor events could be more frequent than those accidentally discovered. A remarkable case is that of the source V2493 Cyg, a T Tauri star recently identified as a strong outbursting object: New optical and near-IR photometric and spectroscopic data are presented in an attempt to clarify its EXor or FUor nature.

Recent outburst of the young star V1180 Cassiopeiae

Aims. We report on the ongoing outburst of the young variable V1180 Cas, which is known to display characteristics in common with EXor eruptive variables. We present results that support the scenario of an accretion-driven nature of the brightness variations of the object and provide the first evidence of jet structures around the source. Methods. We monitored the recent flux variations of the target in the RC, J, H ,a ndK bands. New optical and near-IR spectra taken during the current high state of V1180 Cas are presented, in conjunction with H2 narrow-band imaging of the source. Results. Observed near-IR colour variations are analogous to those observed in EXors and consistent with excess emission originating from an accretion event. The spectra show numerous emission lines, which indicates accretion, ejection of matter, and an active disc.

Interferometry of chemically peculiar stars: Theoretical predictions versus modern observing facilities

By means of numerical experiments we explore the application of interferometry to the detection and characterization of abundance spots in chemically peculiar (CP) stars using the brightest star e UMa as a case study. We find that the best spectral regions to search for spots and stellar rotation signatures are in the visual domain. The spots can clearly be detected already at a first visibility lobe and their signatures can be uniquely disentangled from that of rotation. The spots and rotation signatures can also be detected in near-infrared at low spectral resolution but baselines longer than 180 m are needed for all potential CP candidates. According to our simulations, an instrument like VEGA (or its successor e.g. Fibered and spectrally Resolved Interferometric Equipment New Design) should be able to detect, in the visual, the effect of spots and spots+rotation, provided that the instrument is able to measure V2 ≈ 10-3, and/or closure phase. In infrared, an instrument like AMBER but with longer baselines than the ones available so far would be able to measure rotation and spots. Our study provides necessary details about strategies of spot detections and the requirements for modern and planned interferometric facilities essential for CP star research.

De-biasing interferometric visibilities in VLTI-AMBER data of low SNR observations

Aims. We have found that the interferometric visibilities of VLTI-AMBER observations, extracted via the standard reduction package, are significantly biased when faint targets are concerned. The visibility biases derive from a time variable fringing effect (correlated noise) appearing on the detector. Methods. We have developed a method to correct this bias that consists in a subtraction of the extra power caused by such correlated noise, so that the real power spectrum at the spatial frequencies of the fringing artifact can be restored. Results. This pre-processing procedure is implemented in a software program called AMDC, available to the community, which is to be run before the standard reduction package. Results obtained on simulated and real observations are presented and discussed.

ON THE MID-INFRARED VARIABILITY OF CANDIDATE ERUPTIVE VARIABLES (EXORS): A COMPARISON BETWEEN SPITZER AND WISE DATA

Aiming to statistically study the variability in the mid-IR of young stellar objects, we have compared the 3.6, 4.5, and 24 μm Spitzer fluxes of 1478 sources belonging to the C2D (Cores to Disks) legacy program with the WISE fluxes at 3.4, 4.6, and 22 μm. From this comparison, we have selected a robust sample of 34 variable sources. Their variations were classified per spectral Class (according to the widely accepted scheme of Class I/flat/II/III protostars), and per star forming region. On average, the number of variable sources decreases with increasing Class and is definitely higher in Perseus and Ophiuchus than in Chamaeleon and Lupus. According to the paradigm Class ≡ Evolution, the photometric variability can be considered to be a feature more pronounced in less evolved protostars, and, as such, related to accretion processes. Moreover, our statistical findings agree with the current knowledge of star formation activity in different regions. The 34 selected variables were further investigated for similarities with known young eruptive variables, namely the EXors. In particular, we analyzed (1) the shape of the spectral energy distribution, (2) the IR excess over the stellar photosphere, (3) magnitude versus color variations, and (4) output parameters of model fitting. This first systematic search for EXors ends up with 11 bona fide candidates that can be considered as suitable targets for monitoring or future investigations.

System overview of the VLTI Spectro-Imager

The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.

On the binarity of the classical Cepheid X Sagittarii from interferometric observations

Optical-infrared interferometry can provide direct geometrical measurements of the radii of Cepheids and/or reveal unknown binary companions of these stars. Such information is of great importance for a proper calibration of Period-Luminosity relations and for determining binary fraction among Cepheids. We observed the Cepheid X Sgr with VLTI/AMBER in order to confirm or disprove the presence of the hypothesized binary companion and to directly measure the mean stellar radius, possibly detecting its variation along the pulsation cycle. From AMBER observations in MR mode we performed a binary model fitting on the closure phase and a limb-darkened model fitting on the visibility. Our analysis indicates the presence of a point-like companion at a separation of 10.7 mas and 5.6 magK fainter than the primary, whose flux and position are sharply constrained by the data. The radius pulsation is not detected, whereas the average limb-darkened diameter results to be 1.48+/-0.08 mas, corresponding to 53+/-3 R_sun at a distance of 333.3 pc.

VSI: the VLTI spectro-imager

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R = 12000. Targets as faint as K = 13 will be imaged without requiring a brighter nearby reference object; fainter targets can be accessed if a suitable reference is available. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysics. The high level specifications of the instrument are derived from a detailed science case based on the capability to obtain, for the first time, milliarcsecond-resolution images of a wide range of targets including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.