G. N. Likhatskaya

Interaction of chitosans and their N-acylated derivatives with lipopolysaccharide of gram-negative bacteria

The interactions of lipopolysaccharide (LPS) with the natural polycation chitosan and its derivatives—high molecular weight chitosans (80 kD) with different degree of acetylation, low molecular weight chitosan (15 kD), acylated oligochitosan (5.5 kD) and chitooligosaccharides (biose, triose, and tetraose)—were studied using ligand-enzyme solid-phase assay. The LPS-binding activity of chitosans (80 kD) decreased with increase in acetylation degree. Affinity of LPS interaction with chitosans increased after introduction of a fatty acid residue at the reducing end of chitosan. Activity of N-monoacylated chitooligosaccharides decreased in the order: oligochitosan → tetra-→ tri-→ disaccharides. The three-dimensional structures of complexes of R-LPS and chitosans with different degree of acetylation, chitooligosaccharides, and their N-monoacylated derivatives were generated by molecular modeling. The number of bonds stabilizing the complexes and the energy of LPS binding with chitosans decreased with increase in acetate group content in chitosans and resulted in changing of binding sites. It was shown that binding sites of chitooligosaccharides on R-LPS overlapped and chitooligosaccharide binding energies increased with increase in number of monosaccharide residues in chitosan molecules. The input of the hydrophobic fragment in complex formation energy is most prominent for complexes in water phase and is due to the hydrophobic interaction of chitooligosaccharide acyl fragment with fatty acid residues of LPS.

[Isolation and characterization of recombinant OmpF-like porin from the Yersinia pseudotuberculosis outer membrane].

The encoding sequence of the pore-forming OmpF-like protein from the Yersinia pseudotuberculosis outer membrane was cloned and expressed in Escherichia coli cells. Conditions for isolation and refolding of recombinant monomer and porin trimer were selected. Their spatial structures were characterized by the intrinsic protein fluorescence and CD spectroscopy. It was shown that recombinant porins are similar in the composition of secondary structure elements to isolated porins, but have a considerably less compact tertiary structure. The pore-forming activities of the recombinant proteins are similar to those of Y. pseudotuberculosis native porins.

Influence of cultivation conditions on spatial structure and functional activity of OmpF-like porin from outer membrane of Yersinia pseudotuberculosis

The influence of cultivation conditions of pseudotuberculosis bacteria on the spatial structure and the functional activity of nonspecific OmpF-like porin was studied by means of optical spectroscopy, scanning microcalorimetry, and bilayer lipid membrane technique. With this goal, porin samples isolated from microbial masses grown at different temperatures, nutrient medium densities, and growth phases were characterized. According to CD data, the porin samples under investigation represent β-sheet proteins. It was found that the protein isolated from the colonial culture of pseudotuberculosis bacteria grown at low temperature has the most compact structure. Using intrinsic protein fluorescence, it was shown that different conditions of pseudotuberculosis bacteria cultivation (temperature, medium, growth phase) led to the changes in spectral properties of porin fluorescence due to the redistribution of the contributions of tyrosine and different classes of tryptophan residues to the total protein emission. Heat inactivation of porin samples was studied using CD spectroscopy, intrinsic protein fluorescence, and scanning microcalorimetry. Spatial features of the porin samples were found to affect their functional activities. Considering all these data, it is possible to correlate the spatial structure and functional activity of porin samples isolated under different cultivation conditions of bacteria and the composition of the outer membrane lipid matrix.

Interaction of N-acylated and N-alkylated chitosans included in liposomes with lipopolysaccharide of gram-negative bacteria

The interactions of lipopolysaccharide (LPS) with the polycation chitosan and its derivatives — high molecular weight chitosans (300 kDa) with different degree of N-alkylation, its quaternized derivatives, N-monoacylated low molecular weight chitosans (5.5 kDa) — entrapped in anionic liposomes were studied. It was found that the addition of chitosans changes the surface potential and size of negatively charged liposomes, the magnitudes of which depend on the chitosan concentration. Acylated low molecular weight chitosan interacts with liposomes most effectively. The binding of alkylated high molecular weight chitosan with liposomes increases with the degree of its alkylation. The analysis of interaction of LPS with chitoliposomes has shown that LPS-binding activity decreased in the following order: liposomes coated with a hydrophobic chitosan derivatives > coated with chitosan > free liposomes. Liposomes with N-acylated low molecular weight chitosan bind LPS more effectively than liposomes coated with N-alkylated high molecular weight chitosans. The increase in positive charge on the molecules of N-alkylated high molecular weight chitosans at the cost of quaternization does not lead to useful increase in efficiency of binding chitosan with LPS. It was found that increase in LPS concentration leads to a change in surface ζ-potential of liposomes, an increase in average hydrodynamic diameter, and polydispersity of liposomes coated with N-acylated low molecular weight chitosan. The affinity of the interaction of LPS with a liposomal form of N-acylated chitosan increases in comparison with free liposomes. Computer simulation showed that the modification of the lipid bilayer of liposomes with N-acylated low molecular weight chitosan increases the binding of lipopolysaccharide without an O-specific polysaccharide with liposomes due to the formation of additional hydrogen and ionic bonds between the molecules of chitosan and LPS.

OmpC-like porin from Yersinia pseudotuberculosis: Molecular characteristics, physico-chemical and functional properties

Pore-forming protein from the outer membrane of Yersinia pseudotuberculosis cultured at 37°C has been isolated and characterized. Comparative analysis of the primary and three-dimensional structures of this protein and of OmpC porin from E. coli was carried out, functional properties of these proteins have been studied using bilayer lipid membranes (BLM) technique. The degree of homology, molecular mass and pore-forming properties of the isolated porin was found to be closer to those of OmpC porin from E. coli than OmpF porin from Y. pseudotuberculosis. The value of the most probable conductivity of OmpC porin from Y. pseudotuberculosis (0.18 pS) in BLM corresponded to the conductivity of the native trimer of this protein. Using CD spectroscopy, the porins investigated were shown to belong to the β-structured proteins. Data of the primary structure and intrinsic protein fluorescence revealed essential differences in localization and microenvironment of tryptophan residues in the porins investigated. Participation of external loops L2 and L6 in the formation of the antigenic structure of OmpC porin from Y. pseudotuberculosis was demonstrated. On the basis of crystal structure of osmoporin from Klebsiella pneumoniae, three-dimensional models of the monomer and trimer of the Y. pseudotuberculosis porin were obtained. Using Web server AGGRESCAN, the localization of protein structure sites with the increased aggregation capability (hot spots) has been deter-mined. It turned out that some of these zones localize in the region of intramonomeric contacts in the porin trimer; however, a large part of them is located on the external surface of the β-barrel. The process of thermal denaturation has been studied and the melting points of the porins were determined. It was found that significant changes in the microenvironment of the indole fluorophores (especially tryptophan residues of spectral class I) took place in the process of the thermodenaturation of the proteins. These changes preceded the irreversible conformational transition observed for the E. coli porin at 77°C and for the Y. pseudotuberculosis porin at 70°C.

[Actinoporins from the Sea of Japan anemone Oulactis orientalis: isolation and partial characterization].

Two cytolytic toxins (cytolysins Or-A and Or-G) were isolated from the Sea of Japan anemone Oulactis orientalis and characterized. Their purification scheme involved a hydrophobic chromatography on Polychrom-1, a gel filtration on Akrilex P-4, a cation-exchange chromatography on CM-32 cellulose, and a reverse-phase HPLC on a Nucleosil C18 column. The molecular masses of Or-A and Or-G were determined by SDS-PAGE in 14% PAG to be ca. 18 kDa. The absence of Cys residues and a high content of basic amino acid residues are characteristic of their amino acid compositions. The hemolytic activities of Or-A and Or-G were found to be 295.86 and 322.58 HU/mg, respectively; these are by three orders of magnitude lower than those of sphingomyelin-inhibitable cytolysins from the tropic sea anemones. The amino acid sequences of the N-terminal fragments of Or-A and Or-G were determined to be ATFRVLAK and GAIIAGAA, respectively. Action of the cytolysins on the erythrocyte membrane is inhibited by exogenous sphingomyelin. They form ion channels in bilayer lipid membranes with the conductivity of 16, 32, and 40 pSm in 0.1 M NaCl and 168, 240, and 320 pSm in 1 M NaCl at pH 7.2. Therefore, they were attributed to the group of actinoporins.

Chaperone Skp from Yersinia pseudotuberculosis exhibits immunoglobulin G binding ability

A low-molecular-weight cationic protein that can bind human and rabbit immunoglobulins G has been isolated from Yersinia pseudotuberculosis cells. This immunoglobulin binding protein (IBP) interacts with IgG Fc-fragment, the association constant of the resulting complex being 3.1 μM−1. MALDI-TOF mass spectrometry analysis of IBP revealed its molecular mass of 16.1 kDa, and capillary isoelectrofocusing analysis showed pI value of 9.2. N-Terminal sequence determination by Edman degradation revealed the sequence of the 15 terminal amino acid residues (ADKIAIVNVSSIFQ). Tryptic hydrolysate of IBP was subjected to MALDI-TOF mass spectrometry for proteolytic peptide profiling. Based on the peptide fingerprint, molecular mass, pI, and N-terminal sequence and using bioinformatic resources, IBP was identified as Y. pseudotuberculosis periplasmic chaperone Skp. Using the method of comparative modeling a spatial model of Skp has been built. This model was then used for modeling of Skp complexes with human IgG1 Fc-fragment by means of molecular docking.

Recombinant phospholipase A1 of the outer membrane of psychrotrophic Yersinia pseudotuberculosis: Expression, purification, and characterization

The pldA gene encoding membrane-bound phospholipase A1 of Yersinia pseudotuberculosis was cloned and expressed in Escherichia coli cells. Recombinant phospholipase A1 (rPldA) was isolated from inclusion bodies dissolved in 8 M urea by two-stage chromatography (ion-exchange and gel-filtration chromatography) as an inactive monomer. The molecular mass of the rPldA determined by MALDI-TOF MS was 31.7 ± 0.4 kDa. The highly purified rPldA was refolded by 10-fold dilution with buffer containing 10 mM Triton X-100 and subsequent incubation at room temperature for 16 h. The refolded rPldA hydrolyzed 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine in the presence of calcium ions. The enzyme exhibited maximal activity at 37°C and nearly 40% of maximal activity at 15°C. The phospholipase A1 was active over a wide range of pH from 4 to 11, exhibiting maximal activity at pH 10. Spatial structure models of the monomer and the dimer of Y. pseudotuberculosis phospholipase A1 were constructed, and functionally important amino acid residues of the enzyme were determined. Structural differences between phospholipases A1 from Y. pseudotuberculosis and E. coli, which can affect the functional activity of the enzyme, were revealed.

Mutant OmpF porins of Yersinia pseudotuberculosis with deletions of external loops: Structure–functional and immunochemical properties

Recombinant mutant OmpF porins from Yersinia pseudotuberculosis outer membrane were obtained using site-directed mutagenesis. Here we used four OmpF mutants where single extracellular loops L1, L4, L6, and L8 were deleted one at a time. The proteins were expressed in Escherichia coli at levels comparable to full-sized recombinant OmpF porin and isolated from the inclusion bodies. Purified trimers of the mutant porins were obtained after dialysis and consequent ion-exchange chromatography. Changes in molecular and spatial structure of the mutants obtained were studied using SDS-PAGE and optical spectroscopy (circular dichroism and intrinsic protein fluorescence). Secondary and tertiary structure of the mutant proteins was found to have some features in comparison with that of the full-sized recombinant OmpF. As shown by bilayer lipid membrane technique, the pore-forming activity of purified mutant porins was identical to OmpF porin isolated from the bacterial outer membrane. Lacking of the external loops mentioned above influenced significantly upon the antigenic structure of the porin as demonstrated using ELISA.

Yersinia pseudotuberculosis mutant OmpF porins with deletions of the external loops: genetic constructions design, expression, isolation and refolding

Yersinia pseudotuberculosis outer membrane (OM) recombinant mutant OmpF porins with deletions of the external loops L1, L6 and L8 were obtained using site-directed mutagenesis of the recombinant plasmid including ompF gene. Heterologeous expression of the mutant proteins was carried out in strain Rosetta of Escherichia coli (Novagen, USA), porins with the deletions were isolated from the inclusion bodies. Oligomers of mutant porins were obtained as result of dialysis and ion-exchange chromatography. Spatial structure of the mutant proteins was found to have special features in comparison with that of the full-structured OmpF porin on the level of both secondary and tertiary structure. As shown using bilayer lipid membrane (BLM) technique the absence of the loops L1, L6 and L8 didn’t affect the conductivity level of Y. pseudotuberculosis porin channel. The absence of the loops mentioned above has a significant influence on the antigenic structure of the mutant porins as demonstrated using immunoblotting technique and ELISA.