G. Weigelt

The central dusty torus in the active nucleus of NGC 1068.

Active galactic nuclei (AGNs) display many energetic phenomena—broad emission lines, X-rays, relativistic jets, radio lobes—originating from matter falling onto a supermassive black hole. It is widely accepted that orientation effects play a major role in explaining the observational appearance of AGNs. Seen from certain directions, circum-nuclear dust clouds would block our view of the central powerhouse. Indirect evidence suggests that the dust clouds form a parsec-sized torus-shaped distribution. This explanation, however, remains unproved, as even the largest telescopes have not been able to resolve the dust structures. Here we report interferometric mid-infrared observations that spatially resolve these structures in the galaxy NGC 1068. The observations reveal warm (320 K) dust in a structure 2.1 parsec thick and 3.4 parsec in diameter, surrounding a smaller hot structure. As such a configuration of dust clouds would collapse in a time much shorter than the active phase of the AGN, this observation requires a continual input of kinetic energy to the cloud system from a source coexistent with the AGN.

AMBER, the near-infrared spectro-interferometric three-telescope VLTI instrument

Context: Optical long-baseline interferometry is moving a crucial step forward with the advent of general-user scientific instruments that equip large aperture and hectometric baseline facilities, such as the Very Large Telescope Interferometer (VLTI). Aims: AMBER is one of the VLTI instruments that combines up to three beams with low, moderate and high spectral resolutions in order to provide milli-arcsecond spatial resolution for compact astrophysical sources in the near-infrared wavelength domain. Its main specifications are based on three key programs on young stellar objects, active galactic nuclei central regions, masses, and spectra of hot extra-solar planets. Methods: These key science goals led to scientific specifications, which were used to propose and then validate the instrument concept. AMBER uses single-mode fibers to filter the entrance signal and to reach highly accurate, multiaxial three-beam combination, yielding three baselines and a closure phase, three spectral dispersive elements, and specific self-calibration procedures. Results: The AMBER measurements yield spectrally dispersed calibrated visibilities, color-differential complex visibilities, and a closure phase allows astronomers to contemplate rudimentary imaging and highly accurate visibility and phase differential measurements. AMBER was installed in 2004 at the Paranal Observatory. We describe here the present implementation of the instrument in the configuration with which the astronomical community can access it. Conclusions: .After two years of commissioning tests and preliminary observations, AMBER has produced its first refereed publications, allowing assessment of its scientific potential.

Interferometric data reduction with AMBER/VLTI. Principle, estimators, and illustration

Aims. In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but it can be derived for any single-mode interferometer. Methods. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable, which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the spectral differential phase. Results. The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.

Mid-infrared sizes of circumstellar disks around Herbig Ae/Be stars measured with MIDI on the VLTI

We present the first long baseline mid-infrared interferometric observations of the circumstellar disks surrounding Herbig Ae/Be stars. The observations were obtained using the mid-infrared interferometric instrument MIDI at the European Southern Observatory (ESO) Very Large Telescope Interferometer VLTI on Cerro Paranal. The 102 m baseline given by the telescopes UT1 and UT3 was employed, which provides a maximum full spatial resolution of 20 milli-arcsec (mas) at a wave- length of 10 µm. The interferometric signal was spectrally dispersed at a resolution of 30, giving spectrally resolved visibility information from 8 µm to 13.5 µm. We observed seven nearby Herbig Ae/Be stars and resolved all objects. The warm dust disk of HD 100546 could even be resolved in single-telescope imaging. Characteristic dimensions of the emitting regions at 10 µm are found to be from 1 AU to 10 AU. The 10 µm sizes of our sample stars correlate with the slope of the 10-25 µm infrared spectrum in the sense that the reddest objects are the largest ones. Such a correlation would be consistent with a different ge- ometry in terms of flaring or flat (self-shadowed) disks for sources with strong or moderate mid-infrared excess, respectively. We compare the observed spectrally resolved visibilities with predictions based on existing models of passive centrally irra- diated hydrostatic disks made to fit the SEDs of the observed stars. We find broad qualitative agreement of the spectral shape of visibilities corresponding to these models with our observations. Quantitatively, there are discrepancies that show the need for a next step in modelling of circumstellar disks, satisfying both the spatial constraints such as are now available from the MIDI observations and the flux constraints from the SEDs in a consistent way.

Multiplicity of the massive stars in the Orion Nebula cluster

An improved metal-core weld wire, usable for joint and surface welding, having a steel sheath with a core, and a core composition disposed in the core of the steel sheath, wherein the core composition is between approximately 0.001-12.0% total weight of the metal-core wire. The metal-core wires of the present invention have improved manufacturability. In another embodiment, the core composition includes iron powder in an amount that provides an oxygen content less than approximately 600 ppm in the metal-core wire for producing weld deposits with improved impact strength properties.

The dusty heart of nearby active galaxies. I. High-spatial resolution mid-IR spectro-photometry of Seyfert galaxies

In a series of papers, we aim at stepping towards characterizing physical properties of the AGN dust torus by combining IR highspatial resolution observations with 3D clumpy torus models. In this first paper, we present mid-IR imaging and 8−13 μ ml owresolution spectroscopy of nine type 1 and ten type 2 AGN. The observations were carried out with the VLT/VISIR mid-IR imager and spectrograph and can be considered the largest currently available mid-infrared spectro-photometric data set of AGN at spatial resolution <100 pc. These data resolve scales at which the emission from the dust torus dominates the overall flux, and emission from the host galaxy (e.g. star-formation) is resolved out in most cases. The silicate absorption features are moderately deep and emission features, if seen at all, are shallow. The strongest silicate emission feature in our sample shows some notable shift of the central wavelength from the expected 9.7 μm (based on ISM extinction curves) to ∼10.5 μm. We compare the observed mid-IR luminosities of our objects to AGN luminosity tracers (X-ray, optical and [O iii] luminosities) and find that the mid-IR radiation is emitted quite isotropically. In two cases, IC 5063 and MCG–3–34–64, we find evidence for extended dust emission in the narrow-line region. We confirm the correlation between observed silicate feature strength and Hydrogen column density, which was recently found in Spitzer data at lower spatial resolution. In a further step, our 3D clumpy torus model has been used to interpret the data. We show that the strength of the silicate feature and the mid-IR spectral index α can be used to get reasonable constraints on the radial dust distribution of the torus and the average number of clouds N0 along an equatorial line-of-sight in clumpy torus models. The mid-IR spectral index α is almost exclusively determined by the radial dust distribution power-law index a, while the silicate feature depth mostly depends on N0 and the torus inclination. A comparison of model predictions to our type 1 and type 2 AGN reveals that average parameters of a = −1.0 ± 0. 5a ndN0 = 5 − 8 are typically seen in the presented sample, which means that the radial dust distribution is rather shallow. As a proof-of-concept of this method, we compared the model parameters derived from α and the silicate feature strength to more detailed studies of full IR SEDs and interferometry and found that the constraints on a and N0 are consistent. Finally, we may have found evidence that the radial structure of the torus changes from low to high AGN luminosities towards steeper dust distributions, and we discuss implications for the IR size-luminosity relation.

The origin of hydrogen line emission for five Herbig Ae/Be stars spatially resolved by VLTI/AMBER spectro-interferometry

Context. Accretion and outflow processes are of fundamental importance for our understanding of the formation of stars and planetary systems. To trace these processes, diagnostic spectral lines such as the Brγ 2.166 μm line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Aims. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the Brγ line emission with mass infall (magnetospheric accretion, gaseous inner disks) or mass outflow processes (stellar winds, X-winds, or disk winds). Methods. Using the VLTI/AMBER instrument, we spatially and spectrally (λ/Δλ = 1500) resolved the inner (≾5 AU) environment of five Herbig Ae/Be stars (HD163296, HD104237, HD98922, MWC297, V921 Sco) in the Brγ emission line as well as in the adjacent continuum. From the measured wavelength-dependent visibilities, we derive the characteristic size of the continuum and Brγ line-emitting region. Additional information is provided by the closure phase, which we could measure both in the continuum wavelength regime (for four objects) as well as in the spectrally resolved Brγ emission line (for one object). The spectro-interferometric data is supplemented by archival and new VLT/ISAAC spectroscopy. Results. For all objects (except MWC297), we measure an increase of visibility within the Brγ emission line, indicating that the Brγ-emitting region in these objects is more compact than the dust sublimation radius. For HD98922, our quantitative analysis reveals that the line-emitting region is compact enough to be consistent with the magnetospheric accretion scenario. For HD163296, HD104237, MWC297, and V921 Sco we identify an extended stellar wind or a disk wind as the most likely line-emitting mechanism. Since the stars in our sample cover a wide range of stellar parameters, we also search for general trends and find that the size of the Brγ-emitting region does not seem to depend on the basic stellar parameters (such as the stellar luminosity), but correlates with spectroscopic properties, in particular with the Hα line profile shape. Conclusions. By performing the first high-resolution spectro-interferometric survey on Herbig Ae/Be stars, we find evidence for at least two distinct Brγ line-formation mechanisms. Most significant, stars with a P-Cygni Hα line profile and a high mass-accretion rate seem to show particularly compact Brγ-emitting regions (R_(Brγ)/R_(cont) < 0.2), while stars with a double-peaked or single-peaked Hα-line profile show a significantly more extended Brγ-emitting region (0.6 ≾ R_(Brγ)/R_(cont) ≾ 1.4), possibly tracing a stellar wind or a disk wind.

A hot compact dust disk around a massive young stellar object.

Circumstellar disks are an essential ingredient of the formation of low-mass stars. It is unclear, however, whether the accretion-disk paradigm can also account for the formation of stars more massive than about 10 solar masses, in which strong radiation pressure might halt mass infall. Massive stars may form by stellar merging, although more recent theoretical investigations suggest that the radiative-pressure limit may be overcome by considering more complex, non-spherical infall geometries. Clear observational evidence, such as the detection of compact dusty disks around massive young stellar objects, is needed to identify unambiguously the formation mode of the most massive stars. Here we report near-infrared interferometric observations that spatially resolve the astronomical-unit-scale distribution of hot material around a high-mass (∼20 solar masses) young stellar object. The image shows an elongated structure with a size of ∼13 × 19 astronomical units, consistent with a disk seen at an inclination angle of ∼45°. Using geometric and detailed physical models, we found a radial temperature gradient in the disk, with a dust-free region less than 9.5 astronomical units from the star, qualitatively and quantitatively similar to the disks observed in low-mass star formation. Perpendicular to the disk plane we observed a molecular outflow and two bow shocks, indicating that a bipolar outflow emanates from the inner regions of the system.

Properties of the close binary and circumbinary torus of the Red Rectangle

New diffraction-limited speckle images of the Red Rectangle in the wavelength range 2.1-3.3 µm with angular resolutions of 44-68 mas (Tuthill et al. 2002) and previous speckle images at 0.7-2.2 µm (Osterbart et al. 1997; Menshchikov et al. 1998) revealed well-resolved bright bipolar outflow lobes and long X-shaped spikes originating deep inside the outflow cavities. This set of high-resolution images stimulated us to reanalyze all infrared observations of the Red Rectangle using our two-dimensional radiative transfer code. The high-resolution images imply a geometrically and optically thick torus-like density distribution with bipolar conical cavities and are inconsistent with the flat disk geometry frequently used to visualize bipolar nebulae. The new detailed modeling, together with estimates of the interstellar extinction in the direction of the Red Rectangle enabled us to more accurately determine one of the key parameters, the distance D ≈ 710pc with model uncertainties of 70pc, which is twice as far as the commonly used estimate of 330pc. The central binary is surrounded by a compact, massive (M ≈ 1.2M⊙), very dense dusty torus with hydrogen densities reaching nH ≈ 2.5 ×10 12 cm −3 (dust-to-gas mass ratiod/� ≈ 0.01). The model implies that most of the dust mass in the dense torus is in very large particles and, on scales of more than an arcsecond, the polar outflow regions are denser than the surrounding medium. The bright component of the spectroscopic binary HD44179 is a post-AGB star with mass M⋆ ≈ 0.57M⊙, luminosity L⋆ ≈ 6000L⊙, and effective temperature T⋆ ≈ 7750K. Based on the orbital elements of the binary, we identify its invisible component with a helium white dwarf with MWD ≈ 0.35M⊙, LWD ∼ 100L⊙, and TWD ∼ 6 ×10 4 K. The hot white dwarf ionizes the low-density bipolar outflow cavities inside the dense torus, producing a small HII region observed at radio wavelengths. We propose an evolutionary scenario for the formation of the Red Rectangle nebula, in which the binary initially had 2.3 and 1.9M⊙ components at a separation of ∼ 130R⊙. The nebula was formed in the ejection of a common envelope after Roche lobe overflow by the present post-AGB star.

Disk and wind interaction in the young stellar object MWC 297 spatially resolved with VLTI/AMBER

The young stellar object MWC 297 is an embedded B1.5Ve star exhibiting strong hydrogen emission lines and a strong near-infrared continuum excess. This object has been observed with the VLT interferometer equipped with the AMBER instrument during its first commissioning run. VLTI/AMBER is currently the only near infrared interferometer which can observe spectrally dispersed visibilities. MWC 297 has been spatially resolved in the continuum with a visibility of