Gabriele Miccoli

Cone-beam computed tomography in the assessment of periapical lesions in endodontically treated teeth

Objective: This study aimed to evaluate the relationship between the quality of the coronal restoration and the root canal filling on the periapical status of endodontically treated teeth using CBCT. Materials and Methods: CBCT data were obtained from the records of patients who deny any dental treatment in the 2 years prior to the CBCT examination. CBCT images (90 kVp and 7 mA, exposure time of 23 s, and a voxel size of 0.2 mm, with a field of view of 13 cm × 13 cm) of 1011 endodontically treated teeth were observed. A score was given to the quality of the root filling and the quality of the coronal restoration. Statistical Analysis Used: Data were statistically analyzed to correlate the periapical status with gender, dental group. and quality of endodontic treatment and restoration (Chi-square test with a significance level of P < 0.001). Results: Absence of periapical periodontitis was found in 54.9% of the cases. The periapical outcome was not related to gender or dental group (P > 0.05). A statistically significant factor (Chi-square test, P < 0.0001) resulted when different qualities of sealing were compared. Conclusions: CBCT showed that high-quality root canal treatments followed by an adequate coronal sealing restoration avoid the presence of periapical periodontitis in time.

Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of M3 Rotary and M3 Pro Gold NiTi files

Objectives To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal (60° angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.

Short vs. Standard Laser-Microgrooved Implants Supporting Single and Splinted Crowns: A Prospective Study with 3 Years Follow-Up: Effectiveness of Short Implants

PURPOSE The aim of this study was to compare survival rates, marginal bone loss (MBL), and peri-implant soft tissue parameters between short and standard laser-microgrooved implants supporting single or splinted crowns 3 years after loading. MATERIALS AND METHODS 30 subjects received 1 short ( ≤ 7 mm ) and 1 standard length ( ≥ 9 mm ) laser-microgrooved implant in adjacent sites of the premolar and molar regions of the mandible or maxilla. Peri-implant soft tissue parameters and intraoral radiographs were recorded at the delivery of definitive crowns (baseline) and 3 years later. Cumulative survival rate (CSR) and marginal bone loss (MBL) in relation to crown/implant (C/I) ratio, implant length, location, type of antagonist, and type of prosthetic design (single or splinted), were evaluated. RESULTS CSR of short implants was 98%, compared to 100% for standard implants, without significant statistical difference. MBL was not significantly different over the observation period, with an average of 0.23 ± 0.6 mm and 0.27 ± 0.3 mm for short and standard implants, respectively. No statistical differences were found between short and standard implants regarding plaque (14.7% vs. 15.7%), number of sites BOP (8.3% vs. 5.9%), probing depth (1.13 ± 0.6 mm vs. 1.04 ± 0.8 mm), and mean mucosal recession (0.18 ± 0.3 mm vs. 0.22 ± 0.3 mm). Analyzing MBL in relation to the C/I ratio, implant length, location, type of antagonist, and type of prosthetic design, no statistically significant differences were found. CONCLUSION Regardless of C/I ratio, implant length, location, type of antagonist, and type of prosthetic design, short and standard laser-microgrooved implants had similar survival rates, MBL, and peri-implant soft tissue conditions over the observation period of 3 years.

One-stage laser-microtextured implants immediately placed in the inter-radicular septum of molar fresh extraction sockets associated with GBR technique. A case series study

Background The outcome of one-stage trans-mucosal immediate implants with simultaneous guided bone regeneration (GBR) technique has become highly predictable. Furthermore, when this approach is performed to place one-stage implants into the inter-radicular septum of fresh extraction sockets in the molar region, the risk of incorrect emergence profile and off-angle loading is reduced. The aim of the present study was to clinically evaluate the horizontal hard and soft tissue changes, and radiographically the vertical socket walls remodeling, and the early peri-implant marginal bone loss (EMBL) following the placement of immediate one-stage implants in the inter-radicular septum of molar fresh extraction sockets, associated with a collagen membrane. Material and Methods Twenty patients were selected to receive a one-stage implant with laser-microtextured collar surface into the inter-radicular septum of a fresh molar extraction sockets, associated with a simultaneous placement of a collagen membrane. Intraoral radiographs and model casts were used for the evaluation. Correlation between the amount of the keratinized tissue thickness (KTT) with EMBL was also analyzed. Results After 4 months, the vertical radiographic mesial and distal EMBL around implants was of 0.06 ±0.01 mm and 0.04±0.02 mm, respectively, with no statistically significant difference between T0 and T1 (P >0.05). No statistical differences were found also for each radiographic measure used for the examination of implant sites vertical bone changes (p >0.05). Clinically, horizontal changes of the bucco-lingual central width were found statistically significant (p<0.05), whereas no statistical differences were found for bucco-lingual mesial and distal width changes (p >0.05). In addition, no statistically significant correlation between EMBL and the amount of KTT was found (P >0.05). Conclusions Results suggest that the immediate placement of one-stage laser-microtextured implants could provide advantages in preserving the extraction socket’s hard and soft tissue remodeling, and the peri-implant marginal bone level before the prosthetic loading. Key words:One-stage implant, laser-microtextured collar surface, GBR, collagen membrane.

Cone-beam computed tomographic analysis on root and canal morphology of mandibular first permanent molar among multiracial population in Western European population

Objectives: In the present study, confluent canals in the mandibular first molars mesial root were investigated in an Italian population by means of cone-beam computed tomography (CBCT). Materials and Methods: A total of 200 molars, selected from the CBCT examinations of 130 patients who required this type of X-ray study as part of their dental treatment, were examined. The evaluated parameters were number of canals, root canal system configuration, presence of apical confluences, distance between confluences and apical foramina, which canal had a higher degree of curvature, and symmetry between left and right elements in the same individual. Statistical Analysis Used: Percentages of the cases were reported. Results: All the examined roots presented two canals. In 59% of cases, a Vertucci Type IV canal configuration was observed, while in 41% of cases, a Type II configuration was observed. Apical confluences were present in 41% of cases. The average distance between confluences and apical foramina was 2.85 mm. When confluences were present, the mesiobuccal canal showed a higher degree of curvature in 78% of cases. Symmetry in Vertucci configuration was seen in 88% of cases. Conclusions: Apical confluences in the mesial roots of mandibular molar can be present in a significantly high number of cases, and their recognition is essential to prevent the iatrogenic errors during canal instrumentation.

Detection of Bone Defects Using CBCT Exam in an Italian Population

Background The aim of this study was to evaluate the in vivo incidence and the location of fenestrations in a young Italian population by using CBCT. Materials and Methods Fifty patients who had previously performed CBCT for planning third molar extraction or orthodontic therapy were selected for the study. No previous dental treatment had been performed on these patients. Overall, 1,395 teeth were evaluated. Root fenestrations were identified according to the definition of Davies and the American Association of Endodontists. Data was collected and statistically analyzed. Results Fenestrations were observed in 159 teeth out of 1,395 (11% of teeth). In the lower jaw, we found 68 fenestrations (5%) and 91 in the maxilla (6,5%). Incisors were the teeth with the highest incidence of fenestrations. Conclusion The relative common finding (11%) of fenestration supports the need for CBCT exams before any surgical/implant treatment to avoid complications related to the initial presence of fenestrations. CBCT was found to be an effective and convenient tool for diagnosing fenestration.

Incidence of Deformation and Fracture of Twisted File Adaptive Instruments after Repeated Clinical Use

ABSTRACT Objectives The aim of the present study was to investigate the incidence of deformation and fracture of twisted file adaptive nickel-titanium instruments after repeated clinical use and to identify and check whether the three instruments within the small/medium sequence showed similar or different visible signs of metal fatigue. Material and Methods One-hundred twenty twisted file adaptive (TFA) packs were collected after clinically used to prepare three molars and were inspected for deformations and fracture. Results The overall incidence of deformation was 22.2%, which was not evenly distributed within the instruments: 15% for small/medium (SM)1 (n = 18), 38.33% for SM2 (n = 46) and 13.33% for the SM3 instruments (n = 16). The defect rate of SM2 instruments was statistically higher than the other two (P < 0.001). The fracture rate was 0.83% (n = 3), being two SM2 instruments and one SM3. Conclusions It was observed a very low defect rate after clinical use of twisted file adaptive rotary instruments. The untwisting of flutes was significantly more frequent than fracture, which might act as prevention for breakage. The results highlight the fact that clinicians should be aware that instruments within a sequence might be differently subjected to intracanal stress.