Gangxiong Wu

Full-wave analysis of the high frequency characteristics of the sine waveguide slow-wave structure

A theoretical model for calculation of the high frequency characteristics of the sine waveguide slow-wave structure (SWS) is proposed. The formulas of dispersion and interaction impedances of the hybrid modes are obtained by combining the Helmholtz equation with the appropriate boundary conditions. Using the full wave analysis method, it is proved that the periodic structures with a half-period shift followed leads to a pairwise closing of passbands characteristic of adjacent mode. The sine waveguide SWS for 0.22THz traveling wave tube (TWT) is chosen as an illustrative example to verify the validity of the theoretical model, and the calculation results of the dispersion curve and interaction impedance curve are consistent with the HFSS simulation results. In addition, the influences of dimensions of sine waveguide on the high frequency characteristics of +1st spatial harmonic wave are investigated by numerical calculation. The study indicates that the appropriate SWS parameters are helpful for improving ...

Linear analysis of traveling sheet electron beam in sine waveguide tubes

A theoretical model is proposed for linear analysis of the beam–wave interaction in a sine waveguide (SWG) with slow-wave structure. The field expressions and “hot” dispersion equation are obtained by means of field matching. The ohmic loss and attenuation constant due to imperfect conductors are also derived using the theoretical model. Moreover, the effects of voltage, current, beam thickness, period, and oscillation amplitude on the linear gain and bandwidth are calculated. The results indicate a peak gain and 3-dB bandwidth of 6.82 dB/cm and 19.5%, respectively, for a 0.22-THz SWG traveling-wave tube upon selecting reasonable structural parameters and electron-beam dimensions. Furthermore, by considering the ohmic losses for the finite conductivities of 5.8 × 107 S/m and 2.2 × 107 S/m, the theoretical results are compared with those of particle-in-cell simulations performed using Computer Simulation Technology Particle Studio.A theoretical model is proposed for linear analysis of the beam–wave interaction in a sine waveguide (SWG) with slow-wave structure. The field expressions and “hot” dispersion equation are obtained by means of field matching. The ohmic loss and attenuation constant due to imperfect conductors are also derived using the theoretical model. Moreover, the effects of voltage, current, beam thickness, period, and oscillation amplitude on the linear gain and bandwidth are calculated. The results indicate a peak gain and 3-dB bandwidth of 6.82 dB/cm and 19.5%, respectively, for a 0.22-THz SWG traveling-wave tube upon selecting reasonable structural parameters and electron-beam dimensions. Furthermore, by considering the ohmic losses for the finite conductivities of 5.8 × 107 S/m and 2.2 × 107 S/m, the theoretical results are compared with those of particle-in-cell simulations performed using Computer Simulation Technology Particle Studio.

Mutual Coupling Reduction between Patch Antennas Using Meander Line

Meander lines (MLs) in two configurations are presented to reduce the mutual coupling (MC) between two microstrip patch antenna elements. Inserting a slot in the ground plane between the antenna elements is a simple method to reduce the MC, while adding the MLs in the slot of the ground can further reduce the MC. In the first configuration, one ML is inserted in the slot of the ground and a maximum MC reduction of 39 dB throughout the −10 dB bandwidth is achieved. What’s more, the radiation patterns are not changed compared with the dual-element microstrip antenna array with a slotted ground. For the second configuration, two MLs are added in the slot of the ground. It is found that a maximum isolation of 53 dB can be obtained. However, the radiation patterns are slightly changed compared with the dual-element microstrip antenna array with a slot in the ground. Meanwhile, the measured peak gain and efficiency of the dual-element microstrip antenna array in the two configurations are given. Along with this paper, several prototypes have been fabricated and measured. The simulated results are in good accordance with the measurements, which are presented to verify that MC reduction can be achieved between microstrip antenna elements by adding the MLs in the slotted ground.

Design of a Cascade Backward-Wave Oscillator Based on Metamaterial Slow-Wave Structure

An innovative complementary electric split-ring resonator metamaterial (MTM) structure applied as the slow-wave circuit for a cascade backward-wave oscillator (CBWO) operating in C-band is studied in this paper. The idea of a drift tube in a multiresonant cavity extended interaction klystron is borrowed to design a novel backward-wave oscillator (BWO). The construction of this device features two BWOs separated by a short cutoff waveguide for permitting the flow of the electron beam and stopping the electromagnetic wave. The high-frequency characteristics are analyzed and optimized by using a high-frequency structure simulator and computer simulation technology (CST). Meanwhile, the S-parameter retrieval approach is used to retrieve the effective permittivity and permeability. In addition, the CST code is adopted to investigate the performance of the MTM-based CBWO. The particle-in-cell simulation results show that the novel CBWO is capable of achieving over 51.77% electronic efficiency from 4.8344 to 4.8687 GHz. Meanwhile, the maximum electronic efficiency can reach 82.44%, corresponding to a peak output power of 14.51 MW at 4.8466 GHz. These results indicate that the MTM-based CBWO proposed in this paper has the characteristic of miniaturization, manufacturability, and high electronic efficiency.

Study on W-band sheet-beam traveling-wave tube based on flat-roofed sine waveguide

A W-band sheet electron beam (SEB) traveling-wave tube (TWT) based on flat-roofed sine waveguide slow-wave structure (FRSWG-SWS) is proposed. The sine wave of the metal grating is replaced by a flat-roofed sine wave around the electron beam tunnel. The slow-wave characteristics including the dispersion properties and interaction impedance have been investigated by using the eigenmode solver in the 3-D electromagnetic simulation software Ansoft HFSS. Through calculations, the FRSWG SWS possesses the larger average interaction impedance than the conventional sine waveguide (SWG) SWS in the frequency range of 86-110 GHz. The beam-wave interaction was studied and particle-in-cell simulation results show that the SEB TWT can produce output power over 120 W within the bandwidth ranging from 90 to 100 GHz, and the maximum output power is 226 W at typical frequency 94 GHz, corresponding electron efficiency of 5.89%.A W-band sheet electron beam (SEB) traveling-wave tube (TWT) based on flat-roofed sine waveguide slow-wave structure (FRSWG-SWS) is proposed. The sine wave of the metal grating is replaced by a flat-roofed sine wave around the electron beam tunnel. The slow-wave characteristics including the dispersion properties and interaction impedance have been investigated by using the eigenmode solver in the 3-D electromagnetic simulation software Ansoft HFSS. Through calculations, the FRSWG SWS possesses the larger average interaction impedance than the conventional sine waveguide (SWG) SWS in the frequency range of 86-110 GHz. The beam-wave interaction was studied and particle-in-cell simulation results show that the SEB TWT can produce output power over 120 W within the bandwidth ranging from 90 to 100 GHz, and the maximum output power is 226 W at typical frequency 94 GHz, corresponding electron efficiency of 5.89%.

A triple-band planar monopole antenna for GPS/LTE/WLAN/Wi-Fi/WiMAX systems

A novel triple-band planar monopole antenna is presented in this report. By combing a C-shaped monopole, a U-shaped loop and a modified ground with a slot, three operating bands can be achieved. The measured results show that the 10-dB impedance bandwidths of the proposed antenna can cover multiple frequency bands, including 1.55–1.67 GHz, 2.2–3 GHz and 5.13–6 GHz, which can be applied to the GPS, LTE, WLAN, Wi-Fi and WiMAX systems. A prototype of the proposed antenna is fabricated and measured, the experimental results agree well with the simulated results.

Preliminary Design and Experiment of a Ridge-Loaded Staggered Single-Slot Rectangular Coupled-Cavity Structure for

A novel ridge-loaded staggered single-slot rectangular coupled-cavity traveling-wave tube (CC-TWT) operating at X-band is presented. It features large interaction impedance and good thermal dissipation with a moderate bandwidth. Compared with the existing staggered single-slot rectangular CC-TWT and Hughes-type TWT, this structure has the advantage of large coupled impedance and high electron efficiency, which makes it potentially useful for miniaturization in CC-TWT. The electromagnetic characteristics and the beam-wave interaction based on this slow-wave structure are investigated. The calculation results predict that it potentially could provide saturated output power over 20 kW from 8.5 to 9.8 GHz when the cathode voltage is set from 25.4 to 26.4 kV and the beam current is 5 A, respectively. The corresponding saturated gain and the electron efficiency can reach over 34.4 dB and 15.2%. From 8.6 to 9.5 GHz, the gain is even over 38.6 dB, and the electron efficiency is more than 16.9%. The cold test results show that the voltage standing wave ratio of the high-frequency structure is below 2 at the range of 8.5-10 GHz.