Gao-Ren Li

Design and Synthesis of MnO2/Mn/MnO2 Sandwich-Structured Nanotube Arrays with High Supercapacitive Performance for Electrochemical Energy Storage

We demonstrate the design and fabrication of novel nanoarchitectures of MnO(2)/Mn/MnO(2) sandwich-like nanotube arrays for supercapacitors. The crystalline metal Mn layers in the MnO(2)/Mn/MnO(2) sandwich-like nanotubes uniquely serve as highly conductive cores to support the redox active two-double MnO(2) shells with a highly electrolytic accessible surface area and provide reliable electrical connections to MnO(2) shells. The maximum specific capacitances of 937 F/g at a scan rate of 5 mV/s by cyclic voltammetry (CV) and 955 F/g at a current density of 1.5 A/g by chronopotentiometry were achieved for the MnO(2)/Mn/MnO(2) sandwich-like nanotube arrays in solution of 1.0 M Na(2)SO(4). The hybrid MnO(2)/Mn/MnO(2) sandwich-like nanotube arrays exhibited an excellent rate capability with a high specific energy of 45 Wh/kg and specific power of 23 kW/kg and excellent long-term cycling stability (less 5% loss of the maximum specific capacitance after 3000 cycles). The high specific capacitance and charge-discharge rates offered by such MnO(2)/Mn/MnO(2) sandwich-like nanotube arrays make them promising candidates for supercapacitor electrodes, combining high-energy densities with high levels of power delivery.

Co3O4/Ni(OH)2 composite mesoporous nanosheet networks as a promising electrode for supercapacitor applications

Co3O4/Ni(OH)2 composite mesoporous nanosheet networks (NNs) grown on conductive substrates were synthesized by heat treatment of Co(OH)2/Ni(OH)2 NNs that were synthesized on Ti substrates by a facile electrochemical deposition route. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and micro-Raman spectroscopy. The above products were directly functionalized as supercapacitor electrodes without using any ancillary materials such as carbon black or binder. Co3O4/Ni(OH)2 composite mesoporous NNs achieved a high specific capacitance (Csp) of 1144 F g−1 at 5 mV s−1 and long-term cyclability. The electrochemical measurements showed Co3O4/Ni(OH)2 composite mesoporous NNs exhibited much better electrochemical performances than single Co3O4 or Ni(OH)2. The binary redox couples of Ni2+/Ni3+ and Co2+/Co3+, nanosheet networks with porous structures, the mesoporous structure within nanosheets, the interconnections among nanosheets, together with the excellent electrical contact with the current collector (substrate) are responsible for the improved electrochemical performances of Co3O4/Ni(OH)2 composite mesoporous NNs. With the ease of large scale fabrication and superior electrochemical characteristics, Co3O4/Ni(OH)2 composite mesoporous NNs grown on Ti substrates will be good candidates for supercapacitor applications.

Porous Pt-Ni-P Composite Nanotube Arrays: Highly Electroactive and Durable Catalysts for Methanol Electrooxidation

Porous Pt-Ni-P composite nanotube arrays (NTAs) on a conductive substrate in good solid contact are successfully synthesized via template-assisted electrodeposition and show high electrochemical activity and long-term stability for methanol electrooxidation. Hollow nanotubular structures, porous nanostructures, and synergistic electronic effects of various elements contribute to the high electrocatalytic performance of porous Pt-Ni-P composite NTA electrocatalysts.

Hierarchical NiCo2O4 nanosheets@hollow microrod arrays for high-performance asymmetric supercapacitors

Novel hierarchical NiCo2O4 nanosheets@hollow microrod arrays (NSs@HMRAs) are fabricated by a simple and environmental friendly template-assisted electrodeposition followed by thermal annealing. Due to their unique nanostructures, the NiCo2O4 NSs@HMRAs, as electrodes, exhibited a high specific capacitance (Csp) (678 F g−1 at 6 A g−1) and outstanding cycle stability (Csp retention of 96.06% after 1500 cycles). The desirable superior capacitive performance of the NiCo2O4 NSs@HMRAs can be attributed to the large specific surface area, fast ion diffusion, and perfect charge transmission in the hierarchical NSs@HMRAs. The asymmetric supercapacitor (ASC) based on the NiCo2O4 NSs@HMRAs as a positive electrode and active carbon (AC) as a negative electrode was assembled and it exhibited a Csp of 70.04 F g−1 at 5 mV s−1 and a high energy density of 15.42 W h kg−1. Moreover, the NiCo2O4 NSs@HMRAs//AC ASC has an outstanding cycle stability (almost no Csp loss after 2500 cycles), making it promising as one of the most attractive candidates for electrochemical energy storage.

Mesoporous MnO2/carbon aerogel composites as promising electrode materials for high-performance supercapacitors.

MnO(2) as one of the most promising candidates for electrochemical supercapacitors has attracted much attention because of its superior electrochemical performance, low cost, and environmentally benign nature. In this Letter, we explored a novel route to prepare mesoporous MnO(2)/carbon aerogel composites by electrochemical deposition assisted by gas bubbles. The products were characterized by energy-dispersive spectrometry (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The MnO(2) deposits are found to have high purity and have a mesoporous structure that will optimize the electronic and ionic conductivity to minimize the total resistance of the system and thereby maximize the performance characteristics of this material for use in supercapacitor electrodes. The results of nitrogen adsorption-desorption experiments and electrochemical measurements showed that these obtained mesoporous MnO(2)/carbon aerogel composites had a large specific surface area (120 m(2)/g), uniform pore-size distribution (around 5 nm), high specific capacitance (515.5 F/g), and good stability over 1000 cycles, which give these composites potential application as high-performance supercapacitor electrode materials.

Single-crystal ZnO nanorod/amorphous and nanoporous metal oxide shell composites: Controllable electrochemical synthesis and enhanced supercapacitor performances

Single-crystal ZnO nanorod/amorphous and nanoporous metal oxide shell composites were facilely prepared by electrochemical deposition and tested as promising electrode materials for supercapacitor applications.

Design of Pd/PANI/Pd Sandwich-Structured Nanotube Array Catalysts with Special Shape Effects and Synergistic Effects for Ethanol Electrooxidation

Low cost, high activity, and long-term durability are the main requirements for commercializing fuel cell electrocatalysts. Despite tremendous efforts, developing non-Pt anode electrocatalysts with high activity and long-term durability at low cost remains a significant technical challenge. Here we report a new type of hybrid Pd/PANI/Pd sandwich-structured nanotube array (SNTA) to exploit shape effects and synergistic effects of Pd-PANI composites for the oxidation of small organic molecules for direct alcohol fuel cells. These synthesized Pd/PANI/Pd SNTAs exhibit significantly improved electrocatalytic activity and durability compared with Pd NTAs and commercial Pd/C catalysts. The unique SNTAs provide fast transport and short diffusion paths for electroactive species and high utilization rate of catalysts. Besides the merits of nanotube arrays, the improved electrocatalytic activity and durability are especially attributed to the special Pd/PANI/Pd sandwich-like nanostructures, which results in electron delocalization between Pd d orbitals and PANI π-conjugated ligands and in electron transfer from Pd to PANI.

FeOOH/Co/FeOOH Hybrid Nanotube Arrays as High-Performance Electrocatalysts for the Oxygen Evolution Reaction

Herein, we developed FeOOH/Co/FeOOH hybrid nanotube arrays (HNTAs) supported on Ni foams for oxygen evolution reaction (OER). The inner Co metal cores serve as highly conductive layers to provide reliable electronic transmission, and can overcome the poor electrical conductivity of FeOOH efficiently. DFT calculations demonstrate the strong electronic interactions between Co and FeOOH in the FeOOH/Co/FeOOH HNTAs, and the hybrid structure can lower the energy barriers of intermediates and thus promote the catalytic reactions. The FeOOH/Co/FeOOH HNTAs exhibit high electrocatalytic performance for OER, such as low onset potential, small Tafel slope, and excellent long-term durability, and they are promising electrocatalysts for OER in alkaline solution.

Design and Synthesis of FeOOH/CeO2 Heterolayered Nanotube Electrocatalysts for the Oxygen Evolution Reaction

FeOOH/CeO2 heterolayered nanotubes supported on Ni foam as efficient oxygen evolution electrocatalysts are reported. The hybrid structure can obviously promote the catalytic performance for the oxygen evolution reaction, such as low onset potential, high electroactivity, and excellent long-term durability. This study provides a new route to the design and fabrication of electrocatalysts with high electroactivity and durability for oxygen evolution.

Synthesis of hierarchical rippled Bi(2)O(3) nanobelts for supercapacitor applications.

Hierarchical rippled Bi(2)O(3) nanobelts were successfully synthesized by an electrodeposition route and tested as promising materials for supercapacitor applications.