Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where George F. Turk is active.

Publication


Featured researches published by George F. Turk.


24th International Conference on Coastal Engineering | 1995

THE CORE-LOC: OPTIMIZED CONCRETE ARMOR

Jeffrey A. Melby; George F. Turk

A special reflecting wall 12 m long and 2.1 m high was built off the beach at Reggio Calabria, and 30 wave gauges were assembled before the wall and were connected to an electronic station on land. It was possible to observe the reflection of wind waves generated by a very stable wind over a fetch of 10 Km. The experiment aimed to verify the general closed solution for the wave group mechanics (Boccotti, 1988, 1989), for the special case of the wave reflection.Significant features on Wadden Sea wave climate are evaluated in respect of the state of the art. Main emphasis was laid on an analysis of the governing boundary conditions of local wave climate in island sheltered Wadden Sea areas with extensions being sufficient for local wind wave growth. Explanatory for significant wave heights a reliable parametrization of local wave climate has been evaluated by using generally available data of water level and wind measurements.


26th International Conference on Coastal Engineering | 1999

IMPACT STRUCTURAL RESPONSE OF CORE-LOC

George F. Turk; Jeffrey A. Melby

Detailed studies have been undertaken to assist in the design of major extensions to the port of Haifa. Both numerical and physical model studies were done to optimise the mooring conditions vis a vis the harbour approach and entrance layout. The adopted layout deviates from the normal straight approach to the harbour entrance. This layout, together with suitable aids to navigation, was found to be nautically acceptable, and generally better with regard to mooring conditions, on the basis of extensive nautical design studies.Hwa-Lian Harbour is located at the north-eastern coast of Taiwan, where is relatively exposed to the threat of typhoon waves from the Pacific Ocean. In the summer season, harbour resonance caused by typhoon waves which generated at the eastern ocean of the Philippine. In order to obtain a better understanding of the existing problem and find out a feasible solution to improve harbour instability. Typhoon waves measurement, wave characteristics analysis, down-time evaluation for harbour operation, hydraulic model tests are carried out in this program. Under the action of typhoon waves, the wave spectra show that inside the harbors short period energy component has been damped by breakwater, but the long period energy increased by resonance hundred times. The hydraulic model test can reproduce the prototype phenomena successfully. The result of model tests indicate that by constructing a jetty at the harbour entrance or building a short groin at the corner of terminal #25, the long period wave height amplification agitated by typhoon waves can be eliminated about 50%. The width of harbour basin 800m is about one half of wave length in the basin for period 140sec which occurs the maximum wave amplification.Two-stage methodology of shoreline prediction for long coastal segments is presented in the study. About 30-km stretch of seaward coast of the Hel Peninsula was selected for the analysis. In 1st stage the shoreline evolution was assessed ignoring local effects of man-made structures. Those calculations allowed the identification of potentially eroding spots and the explanation of causes of erosion. In 2nd stage a 2-km eroding sub-segment of the Peninsula in the vicinity of existing harbour was thoroughly examined including local man-induced effects. The computations properly reproduced the shoreline evolution along this sub-segment over a long period between 1934 and 1997.In connection with the dredging and reclamation works at the Oresund Link Project between Denmark and Sweden carried out by the Contractor, Oresund Marine Joint Venture (OMJV), an intensive spill monitoring campaign has been performed in order to fulfil the environmental requirements set by the Danish and Swedish Authorities. Spill in this context is defined as the overall amount of suspended sediment originating from dredging and reclamation activities leaving the working zone. The maximum spill limit is set to 5% of the dredged material, which has to be monitored, analysed and calculated within 25% accuracy. Velocity data are measured by means of a broad band ADCP and turbidity data by four OBS probes (output in FTU). The FTUs are converted into sediment content in mg/1 by water samples. The analyses carried out, results in high acceptance levels for the conversion to be implemented as a linear relation which can be forced through the origin. Furthermore analyses verifies that the applied setup with a 4-point turbidity profile is a reasonable approximation to the true turbidity profile. Finally the maximum turbidity is on average located at a distance 30-40% from the seabed.


24th International Conference on Coastal Engineering | 1995

THE LARGE SCALE DOLOS FLUME STUDY

George F. Turk; Jeffrey A. Melby

A special reflecting wall 12 m long and 2.1 m high was built off the beach at Reggio Calabria, and 30 wave gauges were assembled before the wall and were connected to an electronic station on land. It was possible to observe the reflection of wind waves generated by a very stable wind over a fetch of 10 Km. The experiment aimed to verify the general closed solution for the wave group mechanics (Boccotti, 1988, 1989), for the special case of the wave reflection.Significant features on Wadden Sea wave climate are evaluated in respect of the state of the art. Main emphasis was laid on an analysis of the governing boundary conditions of local wave climate in island sheltered Wadden Sea areas with extensions being sufficient for local wind wave growth. Explanatory for significant wave heights a reliable parametrization of local wave climate has been evaluated by using generally available data of water level and wind measurements.


Archive | 1994

Concrete armor unit for the protection of coastal, shore lines and hydraulic structures

George F. Turk; Jeffrey A. Melby


Coastal dynamics | 1994

Scale and Modeling Effects in Concrete Armor Experiments

Jeffrey A. Melby; George F. Turk


This Digital Resource was created from scans of the Print Resource | 1997

CORE-LOC Concrete Armor Units.

Jeffrey A. Melby; George F. Turk


Archive | 1996

CORE-LOC™ Development as related to Historical Corps Concrete Armor Unit Performance

Jeffrey A. Melby; George F. Turk


Case Histories of the Design, Construction, and Maintenance of Rubble Mound Structures | 1995

Concrete Armor Unit Performance in Light of Recent Research Results

Jeffrey A. Melby; George F. Turk


23rd International Conference on Coastal Engineering | 1993

DOLOS DESIGN USING RELIABILITY METHODS

Jeffrey A. Melby; George F. Turk


This Digital Resource was created from scans of the Print Resource | 1997

Preliminary 3-D Testing of CORE-LOC (Trademark) as a Repair Concrete Armor Unit for Dolos-Armored Breakwater Slopes

George F. Turk; Jeffrey A. Melby

Collaboration


Dive into the George F. Turk's collaboration.

Top Co-Authors

Avatar

Jeffrey A. Melby

United States Army Corps of Engineers

View shared research outputs
Researchain Logo
Decentralizing Knowledge