George Katsaros

Effect of high-pressure treatment at various temperatures on indigenous proteolytic enzymes and whey protein denaturation in bovine milk

The objective of the present study was to determine the effect of high pressure (HP) processing (200, 450 and 650 MPa) at various temperatures (20, 40 and 55 degrees C) on the total plasmin plus plasminogen-derived activity (PL), plasminogen activator(s) (PA) and cathepsin D activities and on denaturation of major whey proteins in bovine milk. Data indicated that transfer of both PL and PA from the casein micelles to milk serum occurred at all pressures utilized at room temperature (20 degrees C). In addition to the transfer of PL and PA from micelles, there were reductions in activities of PL (16-18%) and PA (38-62%) for the pressures 450 and 650 MPa, at room temperature. There were synergistic negative effects between pressure and temperature on residual PL activity at 450 and 650 MPa and on residual PA activity only at 450 MPa. Cathepsin D activity in the acid whey from HP-treated milk was in general baroresistant at room temperature. The residual activity of cathepsin D decreased significantly at 650 MPa and 40 degrees C and at the pressures 450 and 650 MPa at 55 degrees C. Synergistic negative effects on the amount of native beta-lactoglobulin were observed at 450 and 650 MPa and on the amount of native alpha-lactalbumin at 650 MPa. There were significant correlations between enzymatic activities (PL, PA and cathepsin D) and the residual native beta-lactoglobulin and alpha-lactalbumin in bovine milk. In conclusion, HP significantly affected the activity of indigenous proteolytic enzymes and whey protein denaturation in bovine milk. Reduction in activity of indigenous enzymes (PL, PA and cathepsin D) and transfer of PL and PA from the casein to milk serum induced by HP is expected to have a profound effect on cheese yield, proteolysis during cheese ripening and quality of UHT milk during storage.

Kinetic study of the combined effect of high hydrostatic pressure and temperature on the activity of Lactobacillus delbrueckii ssp. bulgaricus aminopeptidases.

The effect of high hydrostatic pressure (HHP) (100 to 700 MPa) combined with temperature (20 to 40 degrees C) on the activity of 5 aminopeptidases (PepN, PepX, PepY, PepC, and PepA) of Lactobacillus delbrueckii ssp. bulgaricus ACA-DC 0105, used as starter culture for feta cheese production, was studied. Aminopeptidases PepN, PepX, and PepA were activated at pressures up to 200 MPa, at temperatures up to 40 degrees C. PepY and PepC appeared to be more sensitive to pressure and temperature treatment leading to inactivation for pressures above 100 and 200 MPa, respectively, combined with temperature above 30 degrees C. A multi-parameter equation was used for predicting the activation of PepN, PepX, and PepA aminopeptidases in the pressure and temperature domain. Overall, processing at 200 MPa and 20 degrees C may be selected as the optimum conditions for maximum activation of 4 out of 5 aminopeptidases of L. delbrueckii ssp. bulgaricus. A 20-min treatment at these conditions leads to an average 3-fold increase in activity, which could lead to better and faster maturation of white cheese.

Shelf-life prediction models for ready-to-eat fresh cut salads: Testing in real cold chain

The aim of the study was to develop and test the applicability of predictive models for shelf-life estimation of ready-to-eat (RTE) fresh cut salads in realistic distribution temperature conditions in the food supply chain. A systematic kinetic study of quality loss of RTE mixed salad (lollo rosso lettuce-40%, lollo verde lettuce-45%, rocket-15%) packed under modified atmospheres (3% O2, 10% CO2, 87% N2) was conducted. Microbial population (total viable count, Pseudomonas spp., lactic acid bacteria), vitamin C, colour and texture were the measured quality parameters. Kinetic models for these indices were developed to determine the quality loss and calculate product remaining shelf-life (SLR). Storage experiments were conducted at isothermal (2.5-15°C) and non-isothermal temperature conditions (Teff=7.8°C defined as the constant temperature that results in the same quality value as the variable temperature distribution) for validation purposes. Pseudomonas dominated spoilage, followed by browning and chemical changes. The end of shelf-life correlated with a Pseudomonas spp. level of 8 log(cfu/g), and 20% loss of the initial vitamin C content. The effect of temperature on these quality parameters was expressed by the Arrhenius equation; activation energy (Ea) value was 69.1 and 122.6kJ/mol for Pseudomonas spp. growth and vitamin C loss rates, respectively. Shelf-life prediction models were also validated in real cold chain conditions (including the stages of transport to and storage at retail distribution center, transport to and display at 7 retail stores, transport to and storage in domestic refrigerators). The quality level and SLR estimated after 2-3days of domestic storage (time of consumption) ranged between 1 and 8days at 4°C and was predicted within satisfactory statistical error by the kinetic models. Teff in the cold chain ranged between 3.7 and 8.3°C. Using the validated models, SLR of RTE fresh cut salad can be estimated at any point of the cold chain if the temperature history is known. Shelf-life models of validated applicability can serve as an effective tool for shelf-life assessment and the development of new products in the fresh produce food sector.

Food Cold Chain Management and Optimization

The main shelf life determining post-processing parameter for chilled and frozen food products is temperature. Possible temperature fluctuations and even unexpected, out of specifications, temperature conditions throughout the cold chain should be considered when developing a cold chain management and quality/safety assurance system. This chapter describes the use of two different approaches for an effective cold chain management and optimization.

Editorial to the FERE Special Issue “Nonthermal Technologies for Food Preservation” Based on the 2015 International Nonthermal Processing Workshop

The International Nonthermal Processing of Food Workshop is a yearly event organized by the Nonthermal Processing Division of the Institute of Food Technologists (IFT) and the European Federation of Food Science and Technology (EFFoST). The 2015 International Nonthermal Processing Workshop (www.npdworkshop2015.org) with the theme BSustainable Innovation Based on Science and Applied Research of Nonthermal Technologies^ took place in Athens, Greece, on November 12–13, 2015, and it was organized by the Laboratory of Food Chemistry and Technology, School of Chemical Engineering, National Technical University of Athens (NTUA). The main objective of the workshop was the exchange of state-of-the-art knowledge on nonthermal processing to foster sound advances in the field, either on fundamentals or applications, towards innovations in a sustainable framework. Speakers of review presentations at the workshop were invited by the Scientific Committee to submit full manuscripts to be considered for inclusion in this Food Engineering Review Special Issue. The submitted papers underwent the regular peer review process followed by this journal. We thank the authors and the reviewers for their contributions to make this special issue of relevance and great quality and we sincerely hope this excellent collection of articles on Nonthermal Processing of Food will be well received by those working in this area and beyond.