George Shigueki Yasui

Morphology of gametes, post-fertilization events and the effect of temperature on the embryonic development of Astyanax altiparanae (Teleostei, Characidae).

The aim of this study was to describe the morphology of gametes, post-fertilization events and subsequent temperature effects on the early developmental stages of the neotropical species Astyanax altiparanae. The sperm of this species presents a typical morphology of teleost sperm with a spherical head (diameter = 1.88 µm), midpiece (diameter = 0.75 µm) and a single flagellum (length = 18.67 µm). The extrusion of the second polar body and fusion of male and female pronucleus were reported for the first time in this species. Additionally, we observed the formation of the fertilization cone, which prevents polyspermic fertilization. Developmental stages at 22°C, 26°C and 30°C gave rise to fertilization rates at 91.12, 91.42 and 93.04% respectively. Hatching occurred at 25 hpf at 22°C, 16 hpf at 26°C and 11 hpf at 30°C and the hatching rates were 61.78%, 62.90% and 59.45%, respectively. At 22°C, the second polar body was extruded at ≈6 mpf and the male and female pronucleus fused at ≈10 mpf. This fundamental information is important for the field and opens up new possibilities in fish biotechnology, including micromanipulation and chromosome-set manipulation.

Disruption of normal meiosis in artificial inter-populational hybrid females of Misgurnus loach.

Artificial cross between two genetically different populations of Japanese Misgurnus loach was made to examine the reproductive capacity of the artificial inter-populational hybrid females. Ploidy status and microsatellite genotypes of the eggs laid by these hybrids were inferred from those determined in progenies developed by normal fertilization with haploid loach sperm, induced gynogenesis with UV-irradiated goldfish sperm and/or hybridization with intact goldfish sperm. Some hybrid females laid unreduced diploid eggs genetically identical to the mother. However, these diploid eggs could not develop by spontaneous gynogenesis, but grow to triploid by incorporation of a sperm nucleus. Other hybrid females laid haploid eggs together with diploid eggs and/or various aneuploid and polyploid eggs. Thus, a disruption of normal meiosis occurred in inter-populational hybrid females. The results suggested that the two populations should be so distant as to give rise to atypical formation of unreduced and other unusual eggs in their hybrids.

The effect of temperature on the initial development of Brycon amazonicus Spix & Agassiz, 1829 as tool for micromanipulation of embryos

Primordial germ cell (PGC) transplant is a promising tool in aquaculture; however, successful use of this technique requires in depth knowledge of the early stages of embryo and larval development. The aim of this study was to analyse the effect of different temperatures (22, 26, and 30°C) on the early development of B. amazonicus. The newly fertilized eggs were distributed into tanks with controlled temperature and oxygenation. Samples were collected at pre-established times and analysed under light and fluorescence microscopy. Temperature influenced the speed and duration of each stage of early development, including hatching time. The highest pronuclei fusion rate was observed 8 min post-fertilization (mpf) at 22 and 26°C, and 6 mpf at 30°C. The duration of the 512-1000 blastomeres phase during in the blastocyst stage was 1 h 30 min at 22°C, and 25 min at 26 and 30°C. Hatching occurred at 24 h 30 mpf at 22°C, 16 h post-fertilization (hpf) at 26°C, and 11 h 30 mpf at 30°C. The rate of morphologically normal larvae was 88.34% at 22°C, 90.49% at 26°C, and 73% at 30°C. Malformations of the head, yolk sac, heart, and tail were observed in all temperatures. Nevertheless, B. amazonicus embryos were able to develop satisfactory in all three temperatures tested. These results enable embryo manipulation at different temperatures to optimize the micromanipulation time of embryos and larvae for biotechnological studies.

A Flow Cytometry Protocol to Estimate DNA Content in the Yellowtail Tetra Astyanax altiparanae

The production of triploid yellowtail tetra Astyanax altiparanae is a key factor to obtain permanently sterile individuals by chromosome set manipulation. Flow cytometric analysis is the main tool for confirmation of the resultant triploids individuals, but very few protocols are specific for A. altiparanae species. The current study has developed a protocol to estimate DNA content in this species. Furthermore, a protocol for long-term storage of dorsal fins used for flow cytometry analysis was established. The combination of five solutions with three detergents (Nonidet P-40 Substitute, Tween 20, and Triton X-100) at 0.1, 0.2, and 0.4% concentration was evaluated. Using the best solution from this first experiment, the addition of trypsin (0.125, 0.25, and 0.5%) and sucrose (74 mM) and the effects of increased concentrations of the detergents at 0.6 and 1.2% concentration were also evaluated. After adjustment of the protocol for flow cytometry, preservation of somatic tissue or isolated nuclei was also evaluated by freezing (at −20°C) and fixation in saturated NaCl solution, acetic methanol (1:3), ethanol, and formalin at 10% for 30 or 60 days of storage at 25°C. Flow cytometry analysis in yellowtail tetra species was optimized using the following conditions: lysis solution: 9.53 mM MgCl2.7H20; 47.67 mM KCl; 15 mM Tris; 74 mM sucrose, 0.6% Triton X-100, pH 8.0; staining solution: Dulbeccos PBS with DAPI 1 μg mL−1; preservation procedure: somatic cells (dorsal fin samples) frozen at −20°C. Using this protocol, samples may be stored up to 60 days with good accuracy for flow cytometry analysis.

Biotechnology applied to fish reproduction: tools for conservation

This review discusses the new biotechnological tools that are arising and promising for conservation and enhancement of fish production, mainly regarding the endangered and the most economically important species. Two main techniques, in particular, are available to avoid extinction of endangered fish species and to improve the production of commercial species. Germ cell transplantation technology includes a number of approaches that have been studied, such as the transplantation of embryo-to-embryo blastomere, embryo-to-embryo differentiated PGC, larvae to larvae and embryo differentiated PGC, transplantation of spermatogonia from adult to larvae or between adults, and oogonia transplantation. However, the success of germ cell transplantation relies on the prior sterilization of fish, which can be performed at different stages of fish species development by means of several protocols that have been tested in order to achieve the best approach to produce a sterile fish. Among them, fish hybridization and triploidization, germline gene knockdown, hyperthermia, and chemical treatment deserve attention based on important results achieved thus far. This review currently used technologies and knowledge about surrogate technology and fish sterilization, discussing the stronger and the weaker points of each approach.

Stereological analysis of gonads from diploid and triploid fish yellowtail tetra Astyanax altiparanae (Garutti a Britski) in laboratory conditions

This study aimed to examine the gonadal morphology of diploid and triploid fish through stereological analysis. Triploid individuals were obtained after temperature shock (40°C for 2 min) at 2 min post-fertilization and reared until 175 days post-fertilization (dpf). Intact eggs were used to obtain the diploids. Gonads were collected for histological analysis at 83, 114, 144 and 175 dpf. Diploid females and males presented normal oogenesis and spermatogenesis through all the experimental period. Conversely, stereological analysis revealed that triploid females were sterile and oogonia were the prevalent cell type in the ovaries. Triploid males presented increased amounts of spermatocyte cysts and a large area of lumen when compared with diploids and in addition the amount of spermatozoa was lower than that observed for diploids. However, some triploid males presented spermatogenesis similar to diploids. Therefore, we concluded that triploidization is an interesting alternative to produce sterile individuals in A. altiparanae.

Grooves surrounding the micropyle decrease the inseminating dose in fish

In fish with external fertilization, sperm must reach the oocyte through the micropyle to enter the cytoplasm. Fertilization success is then influenced by characteristics of oocytes or sperm. In this study, we evaluated oocyte morphology and sperm motility parameters and their effects on the inseminating dose in a teleost fish Astyanax altiparanae. Interestingly, we found one of the lowest yet described inseminating doses in teleosts (2390 spermatozoa oocyte-1 ml-1). Such a fertilization efficacy may be explained by the long duration of sperm motility (>75 s), the small oocyte diameter (695.119 µm), large micropyle diameter (7.57 µm), and the presence of grooves on the oocyte surface that guides spermatozoon to the fertilization area. Additionally, we have described for the first time a structure that combines grooves on the chorion surface and a ridge in the micropylar area.