Gervaise Mosser

Fibrillogenesis in Dense Collagen Solutions: A Physicochemical Study

Fibrillogenesis, the formation of collagen fibrils, is a key factor in connective tissue morphogenesis. To understand to what extent cells influence this process, we systematically studied the physicochemistry of the self-assembly of type I collagen molecules into fibrils in vitro. We report that fibrillogenesis in solutions of type I collagen, in a high concentration range close to that of living tissues (40-300 mg/ml), yields strong gels over wide pH and ionic strength ranges. Structures of gels were described by combining microscopic observations (transmission electron microscopy) with small- and wide-angle X-ray scattering analysis, and the influence of concentration, pH, and ionic strength on the fibril size and organization was evaluated. The typical cross-striated pattern and the corresponding small-angle X-ray scattering 67-nm diffraction peaks were visible in all conditions in the pH 6 to pH 12 range. In reference conditions (pH 7.4, ionic strength=150 mM, 20 degrees C), collagen concentration greatly influences the overall macroscopic structure of the resultant fibrillar gels, as well as the morphology and structure of the fibrils themselves. At a given collagen concentration, increasing the ionic strength from 24 to 261 mM produces larger fibrils until the system becomes biphasic. We also show that fibrils can form in acidic medium (pH approximately 2.5) at very high collagen concentrations, beyond 150 mg/ml, which suggests a possible cholesteric-to-smectic phase transition. This set of data demonstrates how simple physicochemical parameters determine the molecular organization of collagen. Such an in vitro model allows us to study the intricate process of fibrillogenesis in conditions of molecular packing close to that which occurs in biological tissue morphogenesis.

Type I collagen, a versatile liquid crystal biological template for silica structuration from nano- to microscopic scales

Type I collagen is a suitable and versatile template for the structuration of silica at different length scales.

Silica-collagen bionanocomposites as three-dimensional scaffolds for fibroblast immobilization.

Silica-collagen bionanocomposite hydrogels were obtained by addition of silica nanoparticles to a protein suspension followed by neutralization. Electron microscopy studies indicated that larger silica nanoparticles (80 nm) do not interact strongly with collagen, whereas smaller ones (12 nm) form rosaries along the protein fibers. However, the composite network structurally evolved with time due to the contraction of the cells and the dissolution of the silica nanoparticles. When compared to classical collagen hydrogels, these bionanocomposite materials showed lower surface contraction in the short term (1 week) and higher viability of entrapped cells in the long term (3 weeks). A low level of gelatinase MMP2 enzyme expression was also found after this period. Several proteins involved in the catabolic and anabolic activity of the cells could also be observed by immunodetection techniques. All these data suggest that the bionanocomposite matrices constitute a suitable environment for fibroblast adhesion, proliferation and biological activity and therefore constitute an original three-dimensional environment for in vitro cell culture and in vivo applications, in particular as biological dressings.

Fibroblast encapsulation in hybrid silica–collagen hydrogels

Silica–collagen scaffolds are synthesized by the simultaneous polymerization of aqueous silicates and self-assembly of protein triple helices in the presence of living human dermal fibroblasts.

Long-term fate of silica nanoparticles interacting with human dermal fibroblasts

The long-term fate of fluorescent non-porous FITC-SiO(2) nanoparticles of various sizes (10-200 nm) and charge is studied in the presence of human dermal fibroblasts. Particle aggregates are formed in the culture medium and uptaken, at least partially, by macropinocytosis. The smallest particles have a strong impact on cell viability and genotoxic effects can be observed for negatively-charged colloids 10 nm in size. Largest particles do not impact on cellular activity and can be monitored in cellulo via fluorescence and transmission electron microscopy studies over two weeks. These observations reveal a significant decrease in the size of silica particles located in endocytic vesicles. The dissolution process is confirmed by monitoring the cell culture medium that contains both colloidal and soluble silica species. Such dissolution can be explained on the sole basis of silica solubility and has great implication for the use of non-porous silica particles as intra-cellular drug release systems.

Possible transient liquid crystal phase during the laying out of connective tissues: α-chitin and collagen as models

Morphogenesis of extracellular matrices can be considered from different perspectives. One is that of ontogenesis, i.e., an organisms development, which is mostly concerned with the spatiotemporal regulation of genes, cell differentiation and migration. Complementary to this purely biological point of view, a physico-chemical approach can help in understanding complex mechanisms by highlighting specific events that do not require direct cellular control. Because of a structural similarity between some biological systems and liquid crystals, it was supposed that similar mechanisms could be involved. In this respect, it is important to determine the intrinsic self-assembly properties driving the ordering of biological macromolecules. Here we review in vitro studies of the condensed state of major biological macromolecules from extracellular matrices and related theories describing a mesophase transition in suspensions of rodlike particles. Dilute suspensions of collagen or chitin are isotropic, i.e., the macromolecules can take on any orientation in the fluid. Beyond a critical concentration, an ordered nematic phase appears with a higher volume fraction. The two-phase coexistence can be seen between crossed polarizers since the nematic phase is strongly birefringent and appears bright, whereas the isotropic phase remains dark. A widespread property of these structural macromolecular scaffolds is their chirality. Although the origin of chirality in colloidal suspensions is still a subject of debate, the helical nature of the cholesteric phase can be quantified. Small angle x-ray scattering performed on shear-aligned samples can help demonstrate the cholesteric nature of the anisotropic phase, inferred from optical observations. Liquid-like positional local order is revealed by the presence of broad interference peaks at low angle. The azimuthal profiles of these patterns are fitted to determine the value of the nematic order parameter at the transition. A few physico-chemistry experiments can assess the nature of the transition, and in turn, applying theoretical models can prove useful in predicting and controlling the structure of assemblies of biological macromolecules.

In vitro Studies and Preliminary In vivo Evaluation of Silicified Concentrated Collagen Hydrogels

Hybrid and nanocomposite silica-collagen materials derived from concentrated collagen hydrogels were evaluated in vitro and in vivo to establish their potentialities for biological dressings. Silicification significantly improved the mechanical and thermal stability of the collagen network within the hybrid systems. Nanocomposites were found to favor the metabolic activity of immobilized human dermal fibroblasts while decreasing the hydrogel contraction. Cell adhesion experiments suggested that in vitro cell behavior was dictated by mechanical properties and surface structure of the scaffold. First-to-date in vivo implantation of bulk hydrogels in subcutaneous sites of rats was performed over the vascular inflammatory period. These materials were colonized and vascularized without inducing strong inflammatory response. These data raise reasonable hope for the future application of silica-collagen biomaterials as biological dressings.

Evaluation of dense collagen matrices as medicated wound dressing for the treatment of cutaneous chronic wounds.

Cutaneous chronic wounds are characterized by an impaired wound healing which may lead to infection and amputation. When current treatments are not effective enough, the application of wound dressings is required. To date, no ideal biomaterial is available. In this study, highly dense collagen matrices have been evaluated as novel medicated wound dressings for the treatment of chronic wounds. For this purpose, the structure, mechanical properties, swelling ability and in vivo stability of matrices concentrated from 5 to 40 mg mL(-1) were tested. The matrix stiffness increased with the collagen concentration and was associated with the fibril density and thickness. Increased collagen concentration also enhanced the material resistance against accelerated digestion by collagenase. After subcutaneous implantation in rats, dense collagen matrices exhibited high stability without any degradation after 15 days. The absence of macrophages and neutrophils evidenced their biocompatibility. Subsequently, dense matrices at 40 mg mL(-1) were evaluated as drug delivery system for ampicillin release. More concentrated matrices exhibited the best swelling abilities and could absorb 20 times their dry weight in water, allowing for an efficient antibiotic loading from their dried form. They released efficient doses of antibiotics that inhibited the bacterial growth of Staphylococcus Aureus over 3 days. In parallel, they show no cytotoxicity towards human fibroblasts. These results show that dense collagen matrices are promising materials to develop medicated wound dressings for the treatment of chronic wounds.

Nonlinear optical imaging of lyotropic cholesteric liquid crystals.

We use nonlinear optical microscopy combining Second Harmonic Generation (SHG) microscopy and Two-Photon Excited Fluorescence (2PEF) signals to characterize collagen lyotropic liquid crystals. We show that SHG signals provide highly contrasted images of the three-dimensional texture of cholesteric patterns with submicrometer lateral resolution. Moreover, simultaneous recording of the 2PEF signal enables in situ quantitative mapping of the molecular concentration and its correlation with the observed textures. We apply this technique to the characterization of biomimetic textures obtained in concentrated collagen liquid solutions. We successfully image biologically relevant organizations that are similar to the collagen organization found as a stabilized state in compact bones.

Imaging and 3D morphological analysis of collagen fibrils

The recent booming of multiphoton imaging of collagen fibrils by means of second harmonic generation microscopy generates the need for the development and automation of quantitative methods for image analysis. Standard approaches sequentially analyse two‐dimensional (2D) slices to gain knowledge on the spatial arrangement and dimension of the fibrils, whereas the reconstructed three‐dimensional (3D) image yields better information about these characteristics. In this work, a 3D analysis method is proposed for second harmonic generation images of collagen fibrils, based on a recently developed 3D fibre quantification method. This analysis uses operators from mathematical morphology. The fibril structure is scanned with a directional distance transform. Inertia moments of the directional distances yield the main fibre orientation, corresponding to the main inertia axis. The collaboration of directional distances and fibre orientation delivers a geometrical estimate of the fibre radius. The results include local maps as well as global distribution of orientation and radius of the fibrils over the 3D image. They also bring a segmentation of the image into foreground and background, as well as a classification of the foreground pixels into the preferred orientations. This accurate determination of the spatial arrangement of the fibrils within a 3D data set will be most relevant in biomedical applications. It brings the possibility to monitor remodelling of collagen tissues upon a variety of injuries and to guide tissues engineering because biomimetic 3D organizations and density are requested for better integration of implants.