Gerwen Lammers

A molecularly defined array based on native fibrillar collagen for the assessment of skin tissue engineering biomaterials

Large-scale in vivo evaluation of biomaterials is time-consuming and limited by ethical considerations. The availability of a library of biomaterials would allow a fast and rational in vitro selection of those biomaterials to be evaluated in vivo. For this reason, we developed an array of 48 different, molecularly-defined films based on native fibrillar collagen. The films differed in the type and amount of extracellular matrix components (type I/IV collagens, fibrous/solubilised elastin, glycosaminoglycans, heparin, chondroitin sulfate or dermatan sulfate), method of preparation (homogenisation) and method and extent of crosslinking (carbodiimide (EDC/NHS) or glutaraldehyde). The array was evaluated by studying morphology, proliferation and differentiation of primary human keratinocytes/fibroblasts. Major differences were observed. Only a small selection of films (especially those containing elastin fibres) specifically stimulated the proliferation of keratinocytes, but not fibroblasts. Such films may be the biomaterials of choice for in vivo evaluation for skin tissue engineering and regenerative medicine.

High density gene expression microarrays and gene ontology analysis for identifying processes in implanted tissue engineering constructs.

The in vivo performance of tissue-engineered constructs is often based on generally accepted read-out parameters, like (immuno)histology. In this study, high-density gene expression microarrays and gene ontology (GO) analysis were used as a read-out tool to identify the biological processes occurring after implantation of an acellular collagen-based skin construct using a rat full-thickness wound model. A freely-available program (DAVID) was used to identify up/downregulated biological processes (GO-terms) and results were compared to wound healing/regeneration without a construct. The entire process from RNA isolation to biological interpretation is explained step-by-step. Conventional (immuno)histology was used to validate the biological processes identified and indicate that microarray analysis may provide a valuable, fast and unbiased tool to evaluate the in vivo performance of tissue-engineered constructs. However, challenges remain e.g. with regards to the development of specific GO-terms and annotation of the (rat) genome.

Design and in vivo evaluation of a molecularly defined acellular skin construct: reduction of early contraction and increase in early blood vessel formation.

Skin substitutes are of great benefit in the treatment of patients with full thickness wounds, but there is a need for improvement with respect to wound closure with minimal contraction, early vascularisation, and elastin formation. In this study we designed and developed an acellular double-layered skin construct, using matrix molecules and growth factors to target specific biological processes. The epidermal layer was prepared using type I collagen, heparin and fibroblast growth factor 7 (FGF7), while the porous dermal layer was prepared using type I collagen, solubilised elastin, dermatan sulfate, heparin, fibroblast growth factor 2 (FGF2) and vascular endothelial growth factor (VEGF). The construct was biochemically and morphologically characterised and evaluated in vivo using a rat full thickness wound model. The results were compared with the commercial skin substitute IntegraDRT and untreated wounds. The double-layered construct was prepared according to the design specifications. The epidermal layer was about 40 μm thick, containing 9% heparin and 0.2 μg FGF7 mg per layer, localised at the periphery. The dermal layer was 2.5 mm thick, had rounded pores and contained 10% dermatan sulfate+heparin, and 0.7 μg FGF2+VEGF mg per layer. The double-layered skin construct was implanted in a skin defect and on day 7, 14, 28 and 112 the (remaining) wound area was photographed, excised and (immuno) histologically evaluated. The double-layered skin construct showed more cell influx, significantly less contraction and increased blood vessel formation at early time points in comparison with IntegraDRT and/or the untreated wound. On day 14 the double-layered skin construct also had the fewest myofibroblasts present. On day 112 the double-layered skin construct contained more elastic fibres than IntegraDRT and the untreated wound. Structures resembling hair follicles and sebaceous glands were found in the double-layered skin construct and the untreated wound, but hardly any were found in IntegraDRT. The results provide new opportunities for the application of acellular skin constructs in the treatment of surgical wounds.

Construction of a Microstructured Collagen Membrane Mimicking the Papillary Dermis Architecture and Guiding Keratinocyte Morphology and Gene Expression

A papillary-structured collagen fibril membrane is created, mimicking the 3D-architecture of the human papillary dermis. Primary human keratinocytes cultured to confluency on papillar-structured films are compared to keratinocytes cultured on flat membranes. Microscopical evaluation reveals the presence of morphologically distinct cells at the base of the papillar structures that are not observed on flat membranes. Gene expression microarrays and RT-qPCR indicate that these cells are in a more proliferative/migrational state, whereas cells on flat membranes have a more differentiated expression profile. Immunohistochemical stainings confirm these results. In conclusion, specific collagen architecture can direct keratinocyte behavior, and this may be used to further improve skin regeneration.

Breath acetone to monitor life style interventions in field conditions: An exploratory study

To assess whether breath acetone concentration can be used to monitor the effects of a prolonged physical activity on whole body lipolysis and hepatic ketogenesis in field conditions.

Repair of surgically created diaphragmatic defect in rat with use of a crosslinked porous collagen scaffold.

Large defects in congenital diaphragmatic hernia are closed by patch repair, which is associated with a high complication risk and reherniation rate. New treatment modalities are warranted. We evaluated the feasibility of using an acellular biodegradable collagen bioscaffold for a regenerative medicine approach to close a surgically created diaphragmatic defect in a rat model. Scaffold degradation, cellular ingrowth and regeneration of the diaphragm were studied. In 25 rats, a subcostal incision was made and one third of the right hemidiaphragm was resected. Crosslinked porous type I collagen scaffolds (Ø ~ 14 mm) were sutured into the lesion. Rats were sacrificed at 2, 4, 8, 12 or 24 weeks after scaffold implantation. Implants were evaluated macroscopically and (immuno)histologically. Survival after surgery was 88% with no evidence of reherniation. Histological examination showed that the collagen scaffold degraded slowly and new collagen, elastin and mesothelium were deposited. Blood vessels were observed primarily at the outer borders of the scaffold; their number gradually increased in time. Muscle fibres were found on the scaffold covering up to 10% of the defect. Macroscopically, adhesion of the scaffold to the liver was observed. Use of a collagen scaffold to close a surgically created diaphragmatic defect is feasible, with evidence of new tissue formation. The use of crosslinked collagen scaffolds allows targeted modification; e.g. addition of growth factors to further stimulate growth of muscle cells. Copyright

Upregulation of skeletal muscle inflammatory genes links inflammation with insulin resistance in women with the metabolic syndrome

•  What is the central question of this study? There is a close relationship between insulin resistance and inflammation, but it is largely unknown how these processes are linked in skeletal muscle tissue. •  What is the main finding and its importance? Gene expression microarray analysis identified three inflammatory genes the expression level of which was highly correlated with insulin resistance in women with the metabolic syndrome. This suggests an important role for these genes in the development of skeletal muscle insulin resistance.

The identification of genetic pathways involved in vascular adaptations after physical deconditioning versus exercise training in humans

•  What is the central question of this study? The aim of this study is to identify genes that are involved in vascular adaptations after physical deconditioning and exercise training in humans. •  What is the main finding and its importance? Using unique human in vivo models for local deconditioning and exercise training, we demonstrate that the vascular endothelial growth factor signalling pathway, regulation through transforming growth factor β1 and extracellular matrix‐related genes are likely to be involved in vascular adaptations after physical (in)activity.

Cloning, large-scale production, and purification of active dimeric rat vascular endothelial growth factor (rrVEGF-164).

Large-scale production of recombinant rat vascular endothelial growth factor (rrVEGF-164) is desirable for angiogenic studies. In this study, biologically active recombinant rat vascular endothelial growth factor (rrVEGF-164) was cloned and expressed in the yeast Pichia pastoris, and large-scale production was performed by fermentation. cDNA encoding VEGF-164 was prepared from embryonic rat tissue RNA, and a recombinant pPIC9HV/rVEGF-164 plasmid, containing an AOX1 promoter, was constructed. The methylotrophic P. pastoris was used as the eukaryotic expression system. After transformation, rrVEGF-164 was produced by fermentation ( approximately 124mg/L) and purified by heparin affinity chromatography. SDS-PAGE indicated that rrVEGF-164 was produced as a disulphide-bridged dimer of 48kDa which was purified to near homogeneity by heparin affinity chromatography in a large quantity. A bioassay indicated a three- to fivefold increase in endothelial cell proliferation after 3days, due to the addition of the produced rrVEGF-164. The produced rrVEGF-164 showed a higher biological activity than a commercially available, mouse cell line-based, growth factor. In conclusion, using the P. pastoris expression system we were able to produce biologically active rat VEGF-164 in high quantities and this may provide a powerful tool for basic and applied life sciences.

A comparison of seven methods to analyze heparin in biomaterials: quantification, location, and anticoagulant activity

Glycosaminoglycans, like heparin, are frequently incorporated in biomaterials because of their capacity to bind and store growth factors and because of their hydrating properties. Heparin is also often used in biomaterials for its anticoagulant activity. Analysis of biomaterial-bound heparin is challenging because most assays are based on heparin in solution. In this study, seven different methods were probed to analyze heparin covalently attached to collagen scaffolds. For each method, the basic mechanism and the advantages and disadvantages are given. An analysis by the factor Xa assay and the Farndale assay clearly indicated that the amount of immobilized heparin cannot be determined correctly when the scaffold is intact. Scaffolds had to be proteolytically digested or acid treated to obtain reliable measurements. Methods used to quantify the amount of bound heparin included a hexosamine assay, an uronic acid assay, a Farndale assay, agarose gel electrophoresis, and immuno-dot blot analysis. Location and semiquantification of heparin were accomplished by immunofluorescence. Although all assays had their advantages and disadvantages, the hexosamine assay turned out to be the most robust and is recommended as the preferred assay to quantify the amount of heparin bound to scaffolds. It is applicable to all scaffolds that are acid hydrolyzable. This study may allow researchers in the field to select the most appropriate method to analyze glycosaminoglycans in biomaterials.