Geum-Ju Song

Emission of bisphenol analogues including bisphenol A and bisphenol F from wastewater treatment plants in Korea

Due to the regulation on bisphenol A (BPA) in several industrialized countries, the demand for other bisphenol analogues (BPs) as substitutes for BPA is growing. Eight BPs were determined in sludge from 40 representative wastewater treatment plants (WWTPs) in Korea. Total concentrations of BPs (ΣBP) in sludge ranged from <LOQ to 25700 ng g(-1). The highest concentrations of ΣBP were found in sludge collected from WWTPs that received discharges from the paper and textile industries. The profiles of BPs were dependent on the proportions of industrial wastewater treated at each of the WWTPs. The sludge from industrial WWTPs contained elevated proportions of BPA, whereas sludge from domestic WWTPs was dominated by bisphenol F (BPF), suggesting use of BPF in certain industrial products in Korea. No significant correlations were found between BPs and the WWTP characteristics. The average per-capita emissions of BPs ranged from 0.04 (BPP) to 886 g capita(-1) d (BPA) through WWTP discharges. The emission fluxes of ΣBP through industrial WWTPs were 2-3 orders of magnitudes higher than those calculated for domestic WWTPs, indicating that industrial discharges are the major source of BPs into the Korean environment. This is the first nationwide survey of BPs in sludge from Korean WWTPs.

Occurrence of PBDEs and other alternative brominated flame retardants in sludge from wastewater treatment plants in Korea

Studies on the occurrence of polybrominated diphenyl ethers (PBDEs) and other alternative brominated flame retardants in the environment are scarce. In this study, PBDEs and non-PBDE brominated flame retardants (NBFRs), including decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), were measured in sludge collected from three types of wastewater treatment plants (WWTPs) in Korea. Total concentrations of PBDEs (∑PBDE) in sludge ranged from 298 to 48,000 (mean: 3240) ng/g dry weight. Among 10 NBFRs analyzed, DBDPE and BTBPE were the only ones detected in sludge samples. Concentrations of DBDPE and BTBPE ranged from <LOQ to 3100 (mean: 237) ng/g dry weight and from <LOQ to 21.0 (mean: 1.57) ng/g dry weight, respectively. Concentrations of PBDEs and DBDPE determined in sludge were higher than those reported in other countries. The highest concentrations of ∑PBDE and DBDPE were found in sludge samples originated from industrial-WWTPs (I-WWTPs), suggesting that industrial activities are a major source of these contaminants. Non-parametric multidimensional scaling ordination showed that congener profiles of PBDEs in sludge are dependent on the types of WWTPs. Almost all sludge samples contained a low ratio (mean: 0.18) of DBDPE/BDE 209, indicating an on-going contamination by PBDEs in Korea. However, the high ratios (>1) of DBDPE/BDE 209 were found in sludge from I-WWTPs, reflecting a shift in the usage pattern of BFRs by the Korean industry. The nationwide annual emission fluxes of ∑PBDE, DBDPE and BTBPE via WWTPs to the environment were estimated to be 7400, 480, and 3.7 kg/year, respectively. This is the first study on the occurrence of alternative brominated flame retardants in sludge from Korea.

A nationwide survey and emission estimates of cyclic and linear siloxanes through sludge from wastewater treatment plants in Korea.

Siloxanes are widely used in various industrial applications as well as in personal care products. Despite their widespread use and potential toxic effects, few studies have reported on the occurrence of siloxanes in the environment. In this study, we determined the concentrations of 5 cyclic and 15 linear siloxanes in sludge collected from 40 representative wastewater treatment plants (WWTPs) in Korea. Total concentrations of 20 siloxanes (Σsiloxane) in sludge ranged from 0.05 to 142 (mean: 45.7) μg/g dry weight, similar to the concentrations reported in European countries but higher than those reported in China. The concentrations of siloxanes in sludge from domestic WWTPs were significantly (p<0.01) higher than those from industrial WWTPs, indicating higher consumption of siloxanes in various personal care products (e.g. shampoos and conditioners). The major siloxane compounds found in sludge were decamethylcyclopentasilane (D5), docosamethyldecasiloxane (L10) and dodecamethylcyclohexasilane (D6), which collectively accounted for, on average, 62% of the Σsiloxane concentrations. Non-parametric multidimensional scaling ordination of the profiles of siloxanes indicated the existence of different usage patterns of siloxanes between industrial and household activities. Multiple linear regression analysis of siloxane concentrations and WWTP characteristics suggested that D5, D6 and linear siloxane concentrations in sludge were positively correlated with population served by a WWTP. Environmental emission fluxes of cyclic and linear siloxanes through sludge disposal in Korea were 14,800 and 18,500 kg/year, respectively. This is the first report describing occurrence and environmental emission of siloxanes through sludge in Korea.

Characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil.

An attempt has been made to recover high-calorific fuel gas and useful carbonaceous residue by the electric arc pyrolysis of waste lubricating oil. The characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil were investigated in this study. The produced gas was mainly composed of hydrogen (35-40%), acetylene (13-20%), ethylene (3-4%) and other hydrocarbons, whereas the concentration of CO was very low. Calorific values of gas ranged from 11,000 to 13,000 kcal kg(-1) and the concentrations of toxic gases, such as NO(x), HCl and HF, were below the regulatory emissions limit. Gas chromatography-mass spectrometry (GC/MS) analysis of liquid-phase residues showed that high molecular-weight hydrocarbons in waste lubricating oil were pyrolyzed into low molecular-weight hydrocarbons and hydrogen. Dehydrogenation was found to be the main pyrolysis mechanism due to the high reaction temperature induced by electric arc. The average particle size of soot as carbonaceous residue was about 10 microm. The carbon content and heavy metals in soot were above 60% and below 0.01 ppm, respectively. The utilization of soot as industrial material resources such as carbon black seems to be feasible after refining and grinding.

Enrichment of PCDDs/PCDFs in peripheral utilities of the municipal solid waste incineration facility

This study was performed to suggest the improvements through measuring the amounts of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), re-synthesized in peripheral utilities (PUs) of a commercial-scale municipal solid waste incineration facility (MSWIF) where a few research results existed. The PUs examined in this study consisted of air pre-heaters (APHs) and gas/gas re-heater (GGRH) and kerosene-fired duct burner for selective catalytic reduction (SCR) process. PCDDs/PCDFs in flue gas were simultaneously measured at the inlet and outlet of PUs. Flue gas was cooled down from 380 °C to 249 °C by exchanging the heat with fresh air in APHs, and then heated up to 383 °C by GGRH and duct burner from 164 °C at the outlet of bag filter. The results showed that PCDDs/PCDFs were 3-4 times higher within this temperature range of PUs. In comparison of PCDDs/PCDFs concentrations at the inlet with those at the outlet of PUs, particulate-phase PCDDs/PCDFs were about 9.5-10 times enriched while gaseous-phase ones were decreased by about 33-41%. The PCDDs/PCDFs re-synthesized in the PUs, where PCDDs were relatively higher than PCDFs, showed somewhat different patterns compared to those formed at incinerators and emitted at stack. Through the investigations for PUs, we conclude that the PUs used in MSWIFs was a potential source for de novo synthesis of PCDDs/PCDFs.