Giampaolo Mistura

Stick-Slip Sliding of Water Drops on Chemically Heterogeneous Surfaces

We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic deformations of the drop interface when crossing the stripes. Numerical simulations confirm this view and are used to elucidate the principles underlying the experimental observations.

Ab initio potential energy surfaces of He-CO2 and Ne-CO2 van der Waals complexes

We have calculated ab initio the ground-state potential energy surfaces of Ne-CO2 and He-CO2 van der Waals complexes by using the fourth-order Moller-Plesset perturbation theory with a large basis set containing bond functions. The rigid molecule approximation has been used for CO2. Both complexes have the lowest energy at the T-shaped configuration. In addition, a shallow minimum is found for the linear configuration, with a small barrier connecting the two minima on the potential energy surface, whose height is larger for the lighter noble-gas atom. The implications of these potentials for the wetting behavior of adsorbed films are discussed.

Rapid prototyping of multilayer thiolene microfluidic chips by photopolymerization and transfer lamination

A new fabrication process is described allowing rapid prototyping of multilayer microfluidic chips using commercial thiolene optical adhesives. Thiolene monomer liquid is photopolymerized across transparency masks to obtain partially cured patterns supported on thin polyethylene sheets. The patterns are easily laminated and transferred to a substrate due to the elastomeric nature and adhesiveness of partially cured thiolene. The process characteristics are evaluated by realizing several test structures and fluidic chips. As an example of application, the operation of a microfluidic bead array sensor for pH measurements is then described in some detail.

Capillary Condensation and Evaporation in Alumina Nanopores with Controlled Modulations

Capillary condensation in nanoporous anodic aluminum oxide presenting not interconnected pores with controlled modulations is studied using adsorption experiments and molecular simulations. Both the experimental and simulation data show that capillary condensation and evaporation are driven by the smallest size of the nanopore (constriction). The adsorption isotherms for the open and closed pores are almost identical if constrictions are added to the system. The latter result implies that the type of pore ending does not matter in modulated pores. Thus, the presence of hysteresis loops observed in adsorption isotherms measured in straight nanopores with closed bottom ends can be explained in terms of geometrical inhomogeneities along the pore axis. More generally, these results provide a general picture of capillary condensation and evaporation in constricted or modulated pores that can be used for the interpretation of adsorption in disordered porous materials.

Suspension of water droplets on individual pillars.

We report results of extensive experimental and numerical studies on the suspension of water drops deposited on cylindrical pillars having circular and square cross sections and different wettabilities. In the case of circular pillars, the drop contact line is pinned to the whole edge contour until the drop collapses due to the action of gravity. In contrast, on square pillars, the drops are suspended on the four corners and spilling along the vertical walls is observed. We have also studied the ability of the two geometries to sustain drops and found that if we compare pillars with the same characteristic size, the square is more efficient in pinning large volumes, while if we normalize the volumes to pillar areas, the opposite is true.

Adsorption hysteresis in self-ordered nanoporous alumina.

We performed systematic adsorption studies using self-ordered nanoporous anodic aluminum oxide (AAO) in an extended range of mean pore diameters and with different pore topologies. These matrices were characterized by straight cylindrical pores having a narrow pore size distribution and no interconnections. Pronounced hysteresis loops between adsorption and desorption cycles were observed even in the case of pores closed at one end. These results are in contrast with macroscopic theoretical models and detailed numerical simulations of the adsorption in a single pore. Extensive measurements involving adsorption isotherms, reversal curves, and subloops carried out in closed-bottom pores suggest that the pores do not desorb independently from one another.

Anisotropy of water droplets on single rectangular posts.

We report results of extensive experimental and numerical studies of the anisotropy of water drops deposited on single rectangular posts of mesoscopic size sculpted on different materials. Drops of different volume deposited on the top face of the posts assume an elongated shape along the post direction. Systematic investigations show that while the angle measured along the direction parallel to the post does not change, the one measured across them increases monotonically with the drop volume. The difference in these two angles is found to be proportional to the contact line eccentricity even for very elongated drops, regardless of the post size and material. Results obtained with the lattice Boltzmann method are consistent with these observations and indicate useful trends on the evolution of the drop shape with the system main parameters. We argue that drops deposited on single posts having a very sharp profile represent an ideal model system to investigate anisotropic wetting.

Weak measurement of the Goos–Hänchen shift

It is well known from quantum physics that weak measurements offers a platform of amplifying and detecting very small signals. In this letter, we present the first experimental observation of the Goos-Hänchen shift.

Sliding drops across alternating hydrophobic and hydrophilic stripes

We perform a joint numerical and experimental study to systematically characterize the motion of 30 μl drops of pure water and of ethanol in water solutions, sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with a large wettability contrast and a typical width of hundreds of microns. The fraction of the hydrophobic areas has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be described by a renormalized value of the critical Bond number, i.e., the critical dimensionless force needed to depin the drop before it starts to move. Close to the critical Bond number we observe a jerky motion characterized by an evident stick-slip dynamics. As a result, dissipation is strongly localized in time, and the mean velocity of the drops can easily decrease by an order of magnitude compared to the sliding on the homogeneous surface. Lattice Boltzmann numerical simulations are crucial for disclosing to what extent the sliding dynamics can be deduced from the computed balance of capillary, viscous, and body forces by varying the Bond number, the surface composition, and the liquid viscosity. Beyond the critical Bond number, we characterize both experimentally and numerically the dissipation inside the droplet by studying the relation between the average velocity and the applied volume forces.

Morphological transitions of droplets wetting rectangular domains.

We report the results of comprehensive experiments and numerical calculations of interfacial morphologies of water confined to the hydrophilic top face of rectangular posts of width W = 500 μm and lengths between L = 5W and 30W. A continuous evolution of the interfacial shape from a homogeneous liquid filament to a bulged filament and back is observed during changes in the liquid volume. Above a certain threshold length of L* = 16.0W, the transition between the two morphologies is discontinuous and a bistability of interfacial shapes is observed in a certain interval of the reduced liquid volume V/W(3).